| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet in a single request by naming an arbitrarily high gas price.
When the mpp Elixir library is configured as fee payer (fee_payer: true), MPP.Tempo.Transaction.cosign_fee_payer/3 re-signs the client-supplied base fields of the 0x76 AASigned envelope verbatim, including max_fee_per_gas and max_priority_fee_per_gas, without validating that they are within reasonable bounds. A malicious client embeds arbitrarily large values for these fields in the signed envelope. The server co-signs and broadcasts the transaction. The effective_gas_price billed against the fee-payer wallet is derived from the attacker-supplied ceilings, so the server pays those inflated per-gas rates out of its own wallet. A single crafted request can drain the wallet entirely, after which the server can no longer sponsor gas for legitimate payment requests.
This issue affects mpp: from 0.2.0 before 0.6.0. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per payment by a large multiplier, degrading the sponsor's operating margin.
When the mpp Elixir library is configured as fee payer (fee_payer: true), MPP.Tempo.Transaction.cosign_fee_payer/3 re-signs the client-supplied base fields of the 0x76 AASigned envelope verbatim, including the EIP-2930 access list, without validating its length or contents. EIP-2930 access list entries incur intrinsic gas (~2,400 gas per address, plus 1,900 gas per storage key) charged before any opcode executes, regardless of whether the listed addresses are ever touched. A malicious client submits a valid transferWithMemo call alongside a large number of fabricated access-list entries. The server co-signs and broadcasts the transaction. The intended transfer executes normally, but the fee-payer wallet pays a large multiple of the expected gas cost with no corresponding on-chain work.
At the maintainer's default of 137 access-list entries (fitting within Bandit's 10,000-byte per-header-field limit) and 100 Gwei max_fee_per_gas, per-payment gas cost rises from ~51,287 to ~380,087 gas, a 7.4x multiplier. Sustained abuse destroys the sponsor's operating margin on low-cost payments and, over time, drains the fee-payer wallet.
This issue affects mpp: from 0.2.0 before 0.6.0. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet, resulting in denial of service for legitimate clients.
When the mpp Elixir library is configured as fee payer (fee_payer: true), the MPP.Methods.Tempo payment method co-signs and broadcasts a client-supplied EVM transaction without first validating that the client-supplied gas_limit is sufficient to complete the intended call. A malicious client can submit a signed transferWithMemo transaction with gas_limit deliberately set just below the amount required for successful execution. The server co-signs the transaction and broadcasts it via rpc_broadcast_sync. The transaction runs out of gas during EVM execution and reverts, but the fee-payer wallet is still charged for the burned gas while the client pays nothing and receives no resource. Repeated requests from one or more malicious clients drain the fee-payer wallet at near-zero cost to the attacker, ultimately preventing the server from sponsoring gas for legitimate payment requests.
The wait_for_confirmation = false (optimistic) path is also affected: it invokes simulate_payment_call via eth_call, but that simulation omits the gas parameter and therefore does not catch out-of-gas conditions.
This issue affects mpp: from 0.2.0 before 0.6.0. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper Validation of Specified Quantity in Input in the ASUS AI Suite 3 driver allows a local user to bypass security validation and access restricted memory blocks via crafted IOCTL requests, leading to privilege escalation.
Refer to the 'End-of-Life Notice and Driver Update for Legacy ASUS Drivers ' section on the ASUS Security Advisory for more information. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper Validation of Specified Quantity in Input in the ASUS AI Suite 3 driver allows a local user to access unintended memory regions via crafted IOCTL requests, leading to privilege escalation.
Refer to the 'End-of-Life Notice and Driver Update for Legacy ASUS Drivers ' section on the ASUS Security Advisory for more information. |
| A vulnerability has been found in HdrHistogram up to 2.2.2. This vulnerability affects the function recordValueWithCount of the file src/main/java/org/HdrHistogram/AbstractHistogram.java of the component AbstractHistogram. Such manipulation of the argument Count leads to state issue. The attack can only be performed from a local environment. The exploit has been disclosed to the public and may be used. The existence of this vulnerability is still disputed at present. This issue is disputed due to the potential lack of crossing of security boundaries and the pre-requisites for a successful attack. |
| A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
| A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure. |
| Ledger Nano X, Flex, and Stax devices contain a denial of service vulnerability in the MCU firmware update process due to missing validation of the reset_handler parameter during firmware flashing. An attacker can provide a crafted reset_handler address pointing to invalid memory or attacker-controlled code to cause the device to enter an unrecoverable fault state during boot, resulting in permanent loss of operability. |
| Improper Validation of Specified Quantity in Input vulnerability in WPDeveloper Better Payment – Instant Payments, Donations, Fundraising with Subscriptions & More better-payment allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Better Payment – Instant Payments, Donations, Fundraising with Subscriptions & More: from n/a through <= 2.2.0. |
| An Improper Validation of Specified Quantity in Input vulnerability in the TCP proxy plugin of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial of Service (DoS).
When TCP proxy is engaged in a flow session, to support ALGs, Advanced Anti-Malware, ICAP or UTM, a TCP packet with specifically malformed TCP header will cause flow processing daemon (flowd) to crash and restart. This causes a complete service outage until the system has automatically recovered.
This issue affects Junos OS on MX with SPC3, and SRX Series:
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2.
This issue does not affect releases before 23.4R1. |
| An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered.
Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE).
When this issue happens the following logs can be observed:
fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default
fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, the toc plugin and TableOfContents directive generate heading IDs as predictable toc_N values without slugifying the heading text, allowing attacker-controlled id="toc_N" content to collide with generated anchors and redirect same-page navigation, CSS selectors, or JavaScript handlers. This issue is fixed in version 3.3.0. |
| Immutable.js provides many Persistent Immutable data structures. Prior to 4.3.9 and 5.1.8, List#set, List#setSize, List#setIn, List#updateIn, and the functional set, setIn, and updateIn mishandle an index or size in the range 2 ** 30 to 2 ** 31 in setListBounds in src/List.js, causing an empty List to enter an uncatchable infinite loop, a populated List to allocate without bound until process abort, or setSize to silently wrap large values. This issue is fixed in versions 4.3.9 and 5.1.8. |
| internal-sftp in sshd in OpenSSH before 10.4 recognizes only the first 9 command-line arguments, which can be important if a later command-line argument would have helped to ensure the intended security properties of an SFTP connection. |
| vLLM is a high-throughput and memory-efficient inference and serving engine for LLMs. Prior to 0.24.0, a frontend-legal multi-request speculative decoding workload can cause the rejection sampler to produce a recovered token equal to the model vocabulary size boundary value, which is then converted to negative one when the engine selects the next live token for a request and is written back into the drafter's input ids; that out-of-vocabulary value is later consumed by the model's embedding and attention path and crashes the engine worker with a GPU device-side assertion. The same triggering request sequence is reachable through the public gRPC Generate and Abort endpoints, so a remote client that can send generation requests can crash the shared engine worker, aborting concurrent requests and causing a service-wide denial of service for other clients of the deployment until the worker is restarted. This issue is fixed in version 0.24.0. |
| FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, the PayPalEmail payment adapter accepts PayPal IPN callbacks and credits the IPN-supplied amount (`mc_gross`) to the client's balance without validating it against the invoice total. Combined with a $0.05 floating-point epsilon tolerance in the invoice credit-payment logic, this allows a client to underpay an invoice by up to $0.04 and still have it marked as fully paid. Version 0.8.0 patches the issue. There is no effective workaround without modifying the source code. Merchants using the PayPalEmail adapter should monitor IPN transactions for amounts that do not match their corresponding invoice totals, and manually review and refund suspicious payments. |
| An unauthenticated remote attacker can exhaust
server memory via the GetEndpoints Discovery Service in open62541. The
endpointUrl field of GetEndpointsRequest is not validated for length. An
attacker can declare an arbitrarily large string (up to ~4.09 GB via the UInt32
length field) delivered across intermediate chunks without ever sending the
final chunk. The server buffers all chunks in RAM indefinitely until the
SecureChannel times out. The attack is
pre-session and bypasses all encryption configurations.
The issue affects open62541: from 1.4.0 through 1.4.16, from 1.5.0 through 1.5.4, master. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Skip CSD when it has zeroed workgroups
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
