Export limit exceeded: 373055 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 373055 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 373055 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373055 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50339 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev() syzbot is again reporting attempt to cancel uninitialized work at mgmt_index_removed() [1], for setting of HCI_MGMT flag from mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can race with testing of HCI_MGMT flag from mgmt_index_removed() from hci_sock_bind() due to lack of serialization via hci_dev_lock(). Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag after INIT_DELAYED_WORK() completed. This is a local fix based on mgmt_chan_list_lock. Lack of serialization via hci_dev_lock() might be causing different race conditions somewhere else. But a global fix based on hci_dev_lock() should deserve a future patch. | ||||
| CVE-2022-50335 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: 9p: set req refcount to zero to avoid uninitialized usage When a new request is allocated, the refcount will be zero if it is reused, but if the request is newly allocated from slab, it is not fully initialized before being added to idr. If the p9_read_work got a response before the refcount initiated. It will use a uninitialized req, which will result in a bad request data struct. Here is the logs from syzbot. Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00 0x00 0x00 . . . . . . . . ] (in kfence-#110): p9_fcall_fini net/9p/client.c:248 [inline] p9_req_put net/9p/client.c:396 [inline] p9_req_put+0x208/0x250 net/9p/client.c:390 p9_client_walk+0x247/0x540 net/9p/client.c:1165 clone_fid fs/9p/fid.h:21 [inline] v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118 v9fs_xattr_set fs/9p/xattr.c:100 [inline] v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159 __vfs_setxattr+0x119/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277 vfs_setxattr+0x143/0x340 fs/xattr.c:309 setxattr+0x146/0x160 fs/xattr.c:617 path_setxattr+0x197/0x1c0 fs/xattr.c:636 __do_sys_setxattr fs/xattr.c:652 [inline] __se_sys_setxattr fs/xattr.c:648 [inline] __ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Below is a similar scenario, the scenario in the syzbot log looks more complicated than this one, but this patch can fix it. T21124 p9_read_work ======================== second trans ================================= p9_client_walk p9_client_rpc p9_client_prepare_req p9_tag_alloc req = kmem_cache_alloc(p9_req_cache, GFP_NOFS); tag = idr_alloc << preempted >> req->tc.tag = tag; /* req->[refcount/tag] == uninitialized */ m->rreq = p9_tag_lookup(m->client, m->rc.tag); /* increments uninitalized refcount */ refcount_set(&req->refcount, 2); /* cb drops one ref */ p9_client_cb(req) /* reader thread drops its ref: request is incorrectly freed */ p9_req_put(req) /* use after free and ref underflow */ p9_req_put(req) To fix it, we can initialize the refcount to zero before add to idr. | ||||
| CVE-2022-50333 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: jfs: fix shift-out-of-bounds in dbDiscardAG This should be applied to most URSAN bugs found recently by syzbot, by guarding the dbMount. As syzbot feeding rubbish into the bmap descriptor. | ||||
| CVE-2022-50330 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: cavium - prevent integer overflow loading firmware The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "ntohl(ucode->code_length) * 2" multiplication can have an integer overflow. | ||||
| CVE-2022-50306 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential out of bound read in ext4_fc_replay_scan() For scan loop must ensure that at least EXT4_FC_TAG_BASE_LEN space. If remain space less than EXT4_FC_TAG_BASE_LEN which will lead to out of bound read when mounting corrupt file system image. ADD_RANGE/HEAD/TAIL is needed to add extra check when do journal scan, as this three tags will read data during scan, tag length couldn't less than data length which will read. | ||||
| CVE-2022-50302 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd: set other missing fields when unlocking files vfs_lock_file() expects the struct file_lock to be fully initialised by the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field is NULL. | ||||
| CVE-2022-50300 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when handling missing device in read_one_chunk Store the error code before freeing the extent_map. Though it's reference counted structure, in that function it's the first and last allocation so this would lead to a potential use-after-free. The error can happen eg. when chunk is stored on a missing device and the degraded mount option is missing. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721 | ||||
| CVE-2022-50286 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline When converting files with inline data to extents, delayed allocations made on a file system created with both the bigalloc and inline options can result in invalid extent status cache content, incorrect reserved cluster counts, kernel memory leaks, and potential kernel panics. With bigalloc, the code that determines whether a block must be delayed allocated searches the extent tree to see if that block maps to a previously allocated cluster. If not, the block is delayed allocated, and otherwise, it isn't. However, if the inline option is also used, and if the file containing the block is marked as able to store data inline, there isn't a valid extent tree associated with the file. The current code in ext4_clu_mapped() calls ext4_find_extent() to search the non-existent tree for a previously allocated cluster anyway, which typically finds nothing, as desired. However, a side effect of the search can be to cache invalid content from the non-existent tree (garbage) in the extent status tree, including bogus entries in the pending reservation tree. To fix this, avoid searching the extent tree when allocating blocks for bigalloc + inline files that are being converted from inline to extent mapped. | ||||
| CVE-2022-50259 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix race in sock_map_free() sock_map_free() calls release_sock(sk) without owning a reference on the socket. This can cause use-after-free as syzbot found [1] Jakub Sitnicki already took care of a similar issue in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free") [1] refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: events_unbound bpf_map_free_deferred RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246 RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5 R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004 R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] __sock_put include/net/sock.h:779 [inline] tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092 release_sock+0xaf/0x1c0 net/core/sock.c:3468 sock_map_free+0x219/0x2c0 net/core/sock_map.c:356 process_one_work+0x81c/0xd10 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> | ||||
| CVE-2022-50255 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix reading strings from synthetic events The follow commands caused a crash: # cd /sys/kernel/tracing # echo 's:open char file[]' > dynamic_events # echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger' # echo 1 > events/synthetic/open/enable BOOM! The problem is that the synthetic event field "char file[]" will read the value given to it as a string without any memory checks to make sure the address is valid. The above example will pass in the user space address and the sythetic event code will happily call strlen() on it and then strscpy() where either one will cause an oops when accessing user space addresses. Use the helper functions from trace_kprobe and trace_eprobe that can read strings safely (and actually succeed when the address is from user space and the memory is mapped in). Now the above can show: packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr | ||||
| CVE-2022-50241 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix use-after-free on source server when doing inter-server copy Use-after-free occurred when the laundromat tried to free expired cpntf_state entry on the s2s_cp_stateids list after inter-server copy completed. The sc_cp_list that the expired copy state was inserted on was already freed. When COPY completes, the Linux client normally sends LOCKU(lock_state x), FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server. The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state from the s2s_cp_stateids list before freeing the lock state's stid. However, sometimes the CLOSE was sent before the FREE_STATEID request. When this happens, the nfsd4_close_open_stateid call from nfsd4_close frees all lock states on its st_locks list without cleaning up the copy state on the sc_cp_list list. When the time the FREE_STATEID arrives the server returns BAD_STATEID since the lock state was freed. This causes the use-after-free error to occur when the laundromat tries to free the expired cpntf_state. This patch adds a call to nfs4_free_cpntf_statelist in nfsd4_close_open_stateid to clean up the copy state before calling free_ol_stateid_reaplist to free the lock state's stid on the reaplist. | ||||
| CVE-2022-50235 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Protect against send buffer overflow in NFSv2 READDIR Restore the previous limit on the @count argument to prevent a buffer overflow attack. | ||||
| CVE-2022-50233 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix using strlen with hdev->{dev_name,short_name} Both dev_name and short_name are not guaranteed to be NULL terminated so this instead use strnlen and then attempt to determine if the resulting string needs to be truncated or not. | ||||
| CVE-2022-50227 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Initialize Xen timer only once Add a check for existing xen timers before initializing a new one. Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set. ODEBUG: init active (active state 0) object type: hrtimer hint: xen_timer_callbac0 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502 Call Trace: __debug_object_init debug_hrtimer_init debug_init hrtimer_init kvm_xen_init_timer kvm_xen_vcpu_set_attr kvm_arch_vcpu_ioctl kvm_vcpu_ioctl vfs_ioctl | ||||
| CVE-2022-50221 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Fix out-of-bounds access Clip memory range to screen-buffer size to avoid out-of-bounds access in fbdev deferred I/O's damage handling. Fbdev's deferred I/O can only track pages. From the range of pages, the damage handler computes the clipping rectangle for the display update. If the fbdev screen buffer ends near the beginning of a page, that page could contain more scanlines. The damage handler would then track these non-existing scanlines as dirty and provoke an out-of-bounds access during the screen update. Hence, clip the maximum memory range to the size of the screen buffer. While at it, rename the variables min/max to min_off/max_off in drm_fb_helper_deferred_io(). This avoids confusion with the macros of the same name. | ||||
| CVE-2022-50215 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Allow waiting for commands to complete on removed device When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read. | ||||
| CVE-2022-50200 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: Add boundary check in put_entry() Just like next_entry(), boundary check is necessary to prevent memory out-of-bound access. | ||||
| CVE-2022-50182 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Align upwards buffer size The hardware can support any image size WxH, with arbitrary W (image width) and H (image height) dimensions. Align upwards buffer size for both encoder and decoder. and leave the picture resolution unchanged. For decoder, the risk of memory out of bounds can be avoided. For both encoder and decoder, the driver will lift the limitation of resolution alignment. For example, the decoder can support jpeg whose resolution is 227x149 the encoder can support nv12 1080P, won't change it to 1920x1072. | ||||
| CVE-2022-50171 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - don't sleep when in softirq When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00? | ||||
| CVE-2022-50167 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix potential 32-bit overflow when accessing ARRAY map element If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places. | ||||