Export limit exceeded: 386811 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (386811 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64277 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting. | ||||
| CVE-2026-64284 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exits Move the handling of fastpath userspace exits into vendor code to ensure KVM runs vendor specific operations that need to run before userspace gains control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM needs to flush the PML buffer prior to exiting to userspace, otherwise any memory written by the final KVM_RUN might never be flagged as dirty. Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in general, as that risks consuming stale state in a fastpath handler. That will be addressed in a future change. | ||||
| CVE-2026-64290 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Break the loop on failure in iommufd_fault_fops_read() On a copy_to_user() failure inside the inner list_for_each_entry, only the inner loop breaks; the outer while re-fetches the just-restored fault group and retries the failing copy_to_user() forever, spinning the reader at 100% CPU with fault->mutex held. Check rc after the inner loop and break the outer while as well. | ||||
| CVE-2026-18614 | 1 Gl-inet | 2 Gl-mt3000, Gl-mt3000 Firmware | 2026-08-03 | 9.8 Critical |
| A vulnerability was found in GL-iNet GL-MT3000 up to 4.4.5. Impacted is the function s2s.enable_echo_server of the file /cgi-bin/glc of the component s2s.so Native Plugin. Performing a manipulation of the argument port results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. | ||||
| CVE-2026-18344 | 2 Nik00726, Wordpress | 2 Responsive Thumbnail Slider, Wordpress | 2026-08-03 | 6.1 Medium |
| The Wp Responsive Thumbnail Slider plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'id' parameter in versions up to, and excluding, 1.1.53. This is due to insufficient input sanitization and output escaping in the responsive_thumbnail_image_management() function, which echoes $_GET['id'] directly into a double-quoted HTML attribute with no esc_attr() call. The only guard is a loose PHP numeric comparison ($_GET['id']>0) that a string beginning with a numeric prefix trivially satisfies, and the addslashes() applied by wp_magic_quotes() is inert in HTML-attribute context because backslash is not an HTML escape character. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a specially crafted link. | ||||
| CVE-2026-15644 | 2 Codesupplyco, Wordpress | 2 Powerkit, Wordpress | 2026-08-03 | 6.4 Medium |
| The Powerkit – Supercharge your WordPress Site plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'style' Shortcode Attribute in all versions up to, and including, 3.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-15950 | 2 Cozythemes, Wordpress | 2 Cozy Blocks – Page Builder For Gutenberg Editor & Fse With 600+ Patterns, 58 Blocks & Templates, Wordpress | 2026-08-03 | 6.4 Medium |
| The Cozy Blocks – Page Builder for Gutenberg Editor & FSE with 600+ Patterns, 58 Blocks & Templates plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'layoutCircle.alignment' Block Attribute in all versions up to, and including, 2.2.11 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-15450 | 2 Webaways, Wordpress | 2 Nex-forms-ultimate-forms-plugin, Wordpress | 2026-08-03 | 8.1 High |
| The Nex Forms – Ultimate Form Builder – Lite plugin for WordPress is vulnerable to arbitrary file deletion via path traversal in versions up to, and including, 9.2.3. This is due to the delete_file() AJAX handler retrieving a file path from the database and passing it directly to unlink() with no validation (no realpath(), basename(), or allowlist check), combined with the insert_record() AJAX handler that lets the same authenticated user store an arbitrary value in the target 'location' column (wp_kses() only strips HTML tags and does not neutralize path traversal or absolute paths). This makes it possible for authenticated attackers, with admin-level access and above, to delete arbitrary files on the affected site's server, including wp-config. When the plugin's user-level option is configured to something else, this may be exploitable with lower privileges. | ||||
| CVE-2026-17605 | 2 Stiofansisland, Wordpress | 2 Payment Forms, Buy Now Buttons, And Invoicing System | Getpaid, Wordpress | 2026-08-03 | 6.6 Medium |
| The Payment forms, Buy now buttons, and Invoicing System | GetPaid plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.8.56 via the getpaid_payment_form_element function. This makes it possible for authenticated attackers, with administrator-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | ||||
| CVE-2026-34641 | 3 Adobe, Apple, Microsoft | 4 Premiere, Premiere Pro, Macos and 1 more | 2026-08-03 | 7.8 High |
| Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-16144 | 2 Wordpress, Wpchill | 2 Wordpress, Kali Forms — Contact Form & Drag-and-drop Builder | 2026-08-03 | 8.1 High |
| The Kali Forms — Contact Form & Drag-and-Drop Builder plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.4.20 via the _save_data function. This is due to insufficient validation of the 'thisPermalink' field value before it overwrites a trusted callable placeholder, allowing attacker-controlled strings to reach call_user_func() in _save_data(). This makes it possible for unauthenticated attackers to execute code on the server. Exploitation requires the target form to define a field with a name matching one of the reserved placeholder keys ('thisPermalink', 'entryCounter', or 'submission_link'), as check_if_placeholders_changed() only processes POST keys present in the form's field_type_map. | ||||
| CVE-2026-10782 | 2 Inspirythemes, Wordpress | 2 Realhomes Memberships, Wordpress | 2026-08-03 | 4.3 Medium |
| The RealHomes Memberships plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.0.9. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to grant themselves any premium membership tier without completing a PayPal transaction, generating a falsified active payment receipt and gaining unauthorized access to restricted property listing allowances. | ||||
| CVE-2026-7623 | 2 Brainstormforce, Wordpress | 2 Sureforms – Contact Form Builder, Ai Forms, Payment Form, Survey & Quiz, Wordpress | 2026-08-03 | 6.4 Medium |
| The SureForms – Contact Form, Payment Form & Other Custom Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'headingWrapper' parameter in all versions up to, and including, 2.8.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-13151 | 1 Gitlab | 1 Gitlab | 2026-08-03 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-15430 | 1 Wellbia | 1 Xigncode3 | 2026-08-03 | 6.2 Medium |
| Improper access control in the IRP_MJ_WRITE command interface in Wellbia XIGNCODE3 xhunter2.sys, version 2026.6.1.192, allows a local, unprivileged attacker to achieve local privilege escalation to NT AUTHORITY\SYSTEM, extract credentials from PPL-protected lsass.exe, and terminate PPL-protected security processes. | ||||
| CVE-2026-48859 | 1 Erlang | 4 Erlang/otp, Erlang\/otp, Erlang\/ssh and 1 more | 2026-08-03 | 5.3 Medium |
| Observable Timing Discrepancy vulnerability in Erlang/OTP ssh (ssh_auth, ssh_options modules) allows unauthenticated remote username enumeration via timing side-channel in password authentication. When the SSH daemon is configured with the user_passwords or password option, ssh_auth:check_password/3 performs a PBKDF2-SHA256 computation with 600,000 iterations (~300ms) for valid usernames, but returns immediately (~0ms) for invalid usernames via the ssh_options:get_password_option/2 path. This timing difference is detectable in a single authentication attempt and allows an unauthenticated attacker to distinguish valid from invalid usernames. The user_passwords and password options are documented as intended for test purposes; the recommended alternative is pwdfun, which is not affected by this vulnerability. This vulnerability is associated with program files lib/ssh/src/ssh_auth.erl and lib/ssh/src/ssh_options.erl. This issue affects OTP from OTP 29.0 before OTP 29.0.2, corresponding to ssh from 6.0 before 6.0.1. | ||||
| CVE-2026-18570 | 1 Redhat | 8 Build Keycloak, Build Of Keycloak, Data Grid and 5 more | 2026-08-03 | 5.4 Medium |
| A flaw was found in the full-scope-disabled client-policy executor within the keycloak-services component. This component is responsible for enforcing security policies during client registration and configuration in Red Hat Build of Keycloak. The issue occurs because the executor only validates the fullScopeAllowed field when it is explicitly provided in a request. By omitting this field, a delegated user can bypass the policy, resulting in a client created with full scope access. This allows the client to obtain tokens with unauthorized role mappings. | ||||
| CVE-2026-64360 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken. | ||||
| CVE-2026-64372 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently. | ||||
| CVE-2026-64374 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled. | ||||