Export limit exceeded: 369442 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 369442 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (369442 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63995 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there. | ||||
| CVE-2026-64053 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. | ||||
| CVE-2026-64024 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction Blamed commit moved the TIME_WAIT-derived ISN from the skb control block to a per-CPU variable, assuming the value would always be consumed by tcp_conn_request() for the same packet that wrote it. That assumption is violated by multiple drop paths between the producer (__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer (tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULL When a packet is dropped on any of these paths, tcp_tw_isn is left set. The next SYN processed on the same CPU then consumes the non zero value in tcp_conn_request(), receiving a potentially predictable ISN. This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu variable. Note that tcp_v{4,6}_fill_cb() do not set it. Very litle impact on overall code size/complexity: $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta tcp_v6_rcv 3038 3042 +4 tcp_v4_rcv 3035 3039 +4 tcp_conn_request 2938 2923 -15 Total: Before=24436060, After=24436053, chg -0.00% | ||||
| CVE-2026-64035 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. | ||||
| CVE-2026-63884 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated--- | ||||
| CVE-2026-1771 | 2026-07-21 | 7.2 High | ||
| The MapSVG plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the SVGFile constructor in all versions up to, and including, 8.14.0 This is due to an incorrect conditional check that prevents file validation from taking place. This makes it possible for authenticated attackers, with Administrator-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | ||||
| CVE-2026-63946 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded. | ||||
| CVE-2026-63968 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev | ||||
| CVE-2026-63978 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request. | ||||
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||
| CVE-2026-64027 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: rework the VALID marking (again) Recent commit changed the semantics from NOT_VALID to VALID. I didn't realize that the flags are not stored atomically with the entry in XArray. There's still a race of reader observing a VALID mark for a slot, getting interrupted, writer replacing the entry with a different one, reader continuing, fetching the entry which is now a different pointer than the pointer for which VALID was meant. The biggest consequence of this is that we may see a UAF since net_shaper_rollback() assumed that entries without VALID can be freed without observing RCU. Looks like the XArray marks are buying us nothing at this point. Let's convert the code to an explicit valid field. The smp_load_acquire() / smp_store_release() barriers are marginally cleaner. | ||||
| CVE-2026-64009 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH. | ||||
| CVE-2026-64020 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion. | ||||
| CVE-2026-64023 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: fix a potential use-after-free On error we free aggr->lookups->dev_id before removing the entry from the lookup table. If a concurrent thread calls gpiod_find() before we remove the entry, it could iterate over the list and call gpiod_match_lookup_table() which unconditionally dereferences dev_id when calling strcmp(). Reverse the order of cleanup. | ||||
| CVE-2026-64026 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff. | ||||
| CVE-2026-63947 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard. | ||||
| CVE-2026-64007 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header. | ||||
| CVE-2026-64011 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list. | ||||
| CVE-2026-64015 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: security/keys: fix missed RCU read section on lookup Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. | ||||
| CVE-2026-63972 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Skip redundant detach on already-detached port When mana_per_port_queue_reset_work_handler() runs after a previous detach succeeded but attach failed, the port is left in a detached state with apc->tx_qp and apc->rxqs already freed. Calling mana_detach() again unconditionally leads to NULL pointer dereferences during queue teardown. Add an early exit in mana_detach() when the port is already in detached state (!netif_device_present) for non-close callers, making it safe to call idempotently. This allows the queue reset handler and other recovery paths to simply retry mana_attach() without redundant teardown. | ||||