| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size
Two sites in vmwgfx_resource.c assign boolean literals to
res->guest_memory_size, which is an unsigned long allocation-size
field; the intended target is the adjacent res->guest_memory_dirty
bitfield. After the assignments the field holds 0 or 1 instead of
the resource's MOB allocation size:
- vmw_resource_release() writes 0 (false), and
- vmw_resource_unbind_list() writes 1 (true).
Subsequent revalidation paths read guest_memory_size when computing
the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer
allocation size (vmw_resource_buf_alloc()), producing zero-length
walks or wrap-around ranges that read or write past the MOB bitmap.
The dirty-tracking intent of the original code (mark the resource as
dirtied since the last sync) is also lost, since guest_memory_dirty
is never updated.
Rename both assignments to guest_memory_dirty. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ]. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact] |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: prevent OOB when too many dynamic regions are defined
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
[BUG]
Unlinking a refcounted file whose refcount tree has leaf blocks
triggers a fortify panic due to an out-of-bounds write.
[CAUSE]
When the last leaf block is removed from a refcount tree,
ocfs2_remove_refcount_extent() converts the root back to leaf mode
with a bulk memset on &rb->rf_records. rf_records sits in an anonymous
union with rf_list. rf_list.l_tree_depth aliases rf_records.rl_count,
and is 0 for a single-level tree. With rl_count equal to 0, the memset
writes past the 16-byte declared size of rf_records, which the fortify
checker catches.
[FIX]
Replace the bulk memset on &rb->rf_records with a correctly-bounded
memset on rl_recs[] alone, after setting rl_count to the correct value. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: acquire ARP hw source only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result. |
| Improper access control in debug and engineering interfaces in Danfoss iC7-Automation SP, iC7-Marine, and iC7-Hybrid GR3 allows attackers to gain read/write access to internal values, upload and execute unsigned applications, and upload unsigned EEPROM data and firmware via exposed service interfaces and software update mechanisms |
| Nokogiri versions before 1.13.5 contain an integer overflow vulnerability in packaged libxml2 buffer handling functions that allows attackers to cause out-of-bounds memory writes. Attackers can exploit this by crafting multi-gigabyte XML files to trigger buffer overflows resulting in information disclosure, data modification, or denial of service. |
| Nokogiri before 1.11.4 (CRuby implementation only, when the packaged/vendored libxml2 is used) bundles libxml2 2.9.10, which is affected by multiple vulnerabilities addressed in libxml2 2.9.12, including a memory leak in xmlSchemaValidateStream (CVE-2019-20388), a global buffer over-read in xmlEncodeEntitiesInternal (CVE-2020-24977), a heap-based buffer overflow (CVE-2021-3517), and an out-of-bounds read (CVE-2021-3518). Processing crafted XML documents may lead to denial of service, information disclosure, or memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/fwctl: Fix __fortify_panic
Fix a runtime assertion in cxlctl_get_supported_features(). Fortify
complains that it is potentially overflowing the entries array per
__counted_by_le(num_entries). Quiet the false positive by initializing
@num_entries earlier.
memcpy: detected buffer overflow: 48 byte write of buffer size 0
WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398
RIP: 0010:__fortify_report+0x50/0xa0
Call Trace:
__fortify_panic+0xd/0xf
cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core] |
| Heap-based buffer overflow in the multipart form-data parser in `jst_post.c` in RDK-B WebUI `rdkb-2025q4-kirkstone.04.10.26` allows a remote unauthenticated attacker to cause memory corruption and denial of service, and potentially execute arbitrary code, via a crafted multipart/form-data request. |
| ccoap 77f55c4b466e99327c24ace8a2913d3ba7e2ccd5 contains a vulnerability in the option parsing logic that causes a segmentation fault when processing malformed COAP messages with insufficient option data. |
| ccoap 77f55c4b466e99327c24ace8a2913d3ba7e2ccd5 lcontains a vulnerability in the option parsing logic that causes a segmentation fault when processing COAP messages containing invalid option numbers. |
| A security vulnerability has been detected in TOTOLINK N600R 4.3.0cu.7647_B20210106. The affected element is the function setSystemConfig of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument Hostname leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.7, macOS Sonoma 14.8.7. An app may be able to cause unexpected system termination or write kernel memory. |
| Improper validation of memory boundaries in WibuKey64.sys of WibuKey up to 6.70 for Windows can be exploited by an attacker by setting the pointers outside the scope of the program. This usually results in a denial of service, yet we cannot rule out the possibility of exploits that can cause Remote Code Execution and Privilege Escalation (since the driver runs with system privileges). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB length and overflow checks
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID. |
