| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow in WebGL in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| A security flaw has been discovered in NASA cFS up to 7.0.1. The affected element is the function CFE_SB_GetUserDataLength of the file src/cFS/cfe/modules/sb/fsw/src/cfe_sb_util.c of the component cFE Software Bus. Performing a manipulation of the argument TotalMsgSize/HdrSize results in integer underflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string. |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. |
| Off-by-one error in DevTools in Google Chrome prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to potentially read memory inside the sandbox via a crafted Chrome extension. (Chromium security severity: Low) |
| A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition. |
| An issue in libtiff 85f2ac8e0b01cb7db2bbecf4a3b891bdbef67938 allows an attacker to execute arbitrary code via the libtiff/tools/thumbnail.c: main() component |
| An integer overflow in the libavfilter/vf_scale.c component of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted video file. |
| The GETALL and SETALL commands in semctl(2) recorded the number of semaphores in the target set, dropped the lock protecting the set, allocated a buffer sized for that count, and reacquired the lock. A sequence-number check was used to verify that the set had not been replaced in the interim, but the sequence number wraps after 0x8000 create/destroy cycles. By rapidly destroying and recreating semaphore sets at the same index, another process can cause the sequence number to wrap, allowing a set with a different number of semaphores to pass validation. The subsequent copy then reads or writes past the end of the allocated buffer.
An unprivileged local user can trigger out-of-bounds reads and writes on kernel heap memory, potentially leading to privilege escalation. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| Integer underflow in PostgreSQL ECPG allows a database server administrator to achieve temporary denial of service against the ECPG client via sending a bytea value lacking the mandatory prefix. The client overwrites a huge memory region with bytes outside attacker knowledge or control. This typically yields a simple SIGSEGV, but rare cases might achieve client-specific integrity impact via the write. Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected. |
| Integer wraparound in PostgreSQL fuzzystrmatch allows a user to direct writes to a huge range of addresses, executing arbitrary code as the operating system user running the database, via extreme inputs to SQL function levenshtein() or levenshtein_less_equal(). Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected. |
| Integer wraparound in PostgreSQL 32-bit builds of pltcl and plperl allows an object creator to cause the server to undersize an allocation and write out-of-bounds via crafted function bodies. This may execute arbitrary code as the operating system user running the database. CVE-2026-6473 had fixed similar problems. Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected. |
| Integer wraparound in PostgreSQL tsvector and tsquery data type functions allows an unprivileged database user to cause the server to undersize an allocation and write out-of-bounds, via crafted large inputs. This may execute arbitrary code as the operating system user running the database. These types are typically sourced from application logic, not taken from the application's user. Hence, application users attacking the database, through the application as a conduit, are unlikely. CVE-2026-6473 had fixed similar problems. Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lwtunnel: Drop skb metadata before LWT encapsulation
skb metadata is meant for passing information between XDP and TC. It lives
in the skb headroom, immediately before skb->data. LWT programs cannot
access the __sk_buff->data_meta pseudo-pointer to metadata.
However, LWT encapsulation prepends outer headers, moving skb->data back
over the headroom where the metadata sits. On an RX-originated (forwarded)
packet that still carries XDP metadata this goes wrong in two different
ways, depending on the encap type:
1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull()
and silently overwrite the metadata that sits in the headroom.
2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move().
That helper expects metadata immediately before skb->data. But since
the IP output path runs LWT xmit before neighbour output has built
the outgoing L2 header, for forwarded packets skb->data points at the
L3 header while skb_mac_header() still points at the old L2 header.
skb_data_move() sees metadata ending at skb_mac_header(), not before
skb->data, warns and clears metadata:
WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90
CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1
RIP: 0010:skb_data_move+0x47/0x90
Call Trace:
<IRQ>
bpf_skb_change_head+0xe6/0x1a0
bpf_prog_...+0x213/0x2e3
run_lwt_bpf.isra.0+0x1d3/0x360
bpf_xmit+0x46/0xe0
lwtunnel_xmit+0xa1/0xf0
ip_finish_output2+0x1e7/0x5e0
ip_output+0x63/0x100
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x2b/0x190
net_rx_action+0x40b/0x7f0
handle_softirqs+0xd2/0x270
do_softirq+0x3f/0x60
</IRQ>
That is what happens, as for how to fix it - a received packet that
carries metadata can reach an encap through any of the three LWT
redirect modes:
LWTUNNEL_STATE_INPUT_REDIRECT
ip6_rcv_finish
dst_input
lwtunnel_input
LWTUNNEL_STATE_OUTPUT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
lwtunnel_output
LWTUNNEL_STATE_XMIT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
ip6_output
ip6_finish_output
ip6_finish_output2
lwtunnel_xmit
Every encap funnels through the three LWT dispatch helpers, so drop the
metadata there, right before handing the skb to the encap op. This
single chokepoint covers all encap types and all three redirect modes:
- lwtunnel_input(): seg6, rpl, ila, seg6_local
- lwtunnel_output(): ioam6
- lwtunnel_xmit(): mpls, LWT BPF xmit
Alternatively, we could clear the metadata right after TC ingress hook.
That would require a compromise, however. Metadata would become
inaccessible from TC egress (in setups where it actually reaches the
hook it tact, that is without any L2 tunnels on path). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ]. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix undersized format-check buffer
fmt_buffer_size in dasd_eckd_check_device_format() is declared as
int, even though one of the multiplicands, sizeof(struct eckd_count),
is a size_t. The expression
trkcount * rpt_max * sizeof(struct eckd_count)
is therefore correctly evaluated at 64-bit width, but the result is
silently truncated when it is stored back into the 32-bit
fmt_buffer_size variable. For a sufficiently large track range
(start_unit/stop_unit are caller-controlled) this truncation
yields a buffer size far smaller than the number of tracks actually
requested. kzalloc() then succeeds with an undersized allocation,
while the subsequent channel program build still operates on the
untruncated track count and writes past the end of that buffer.
Compute the buffer size with check_mul_overflow() and keep it in a
size_t, so that a value that no longer fits results in -EINVAL
instead of a silently truncated allocation size. |
| An integer overflow in the SMF component of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted GTP packet. |
| CorvusSKK contains an integer overflow vulnerability, which may allow malicious data to be written to a dictionary file. |
| An integer overflow in the target_sws_fuzzer() function (libswscale/output.c) of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input. |
