| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell PowerProtect Cyber Recovery, versions prior to 20.3, contain an Improper Authentication vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Forwarding information received from a host listed as a trusted proxy is not kept separate from Dovecot's own authentication fields, so a value sent by that host can be injected as an internal authentication field. Any host permitted to act as a trusted proxy can authenticate as any user without knowing that user's password. This affects deployments whose password database honours a field that permits authentication without a password. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known. |
| Improper Authentication vulnerability in Apache Camel Platform HTTP Main component.
This issue affects Apache Camel: from 4.8.0 before 4.22.0.
The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.
Notes:
The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details.
The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available. |
| PyJWT is a JSON Web Token implementation in Python. Prior to 2.13.0, when the verifier is decoding JSON Web Tokens, while supporting both asymmetric and HMAC algorithms, the library does not validate use of JSON Web Keys in HMAC algorithm, allowing attacker to use the issuer public key as the secret key for HMAC algorithm. This vulnerability is fixed in 2.13.0. |
| An attacker that holds an OAuth2 token granting only part of the required scopes can authenticate, because when more than one scope is required in the configuration, the remote token validation paths accept a token that carries only one of them, while the local token validation path correctly requires all of them. The configured authorization policy is not enforced, so a token that was granted only part of the required permissions is accepted where it should have been rejected. Use local token validation where tokens can be validated locally. Update to non-vulnerable version. No publicly available exploits are known. |
| An attacker that holds a token intended for a different purpose can authenticate, because when an OAuth2 token response does not contain a scope claim, the audience claim is used in its place and checked against the configured required scopes. These are different concepts, and the audience claim does not describe what a token is allowed to do. A token that grants no relevant permissions can be accepted because its intended recipient value happens to match a configured scope name, granting access that should have been denied. It also hides an identity provider misconfiguration where scopes are not being issued at all. Ensure the identity provider issues a scope claim for all tokens used with Dovecot, and that configured scope names do not match audience values. Update to non-vulnerable version. No publicly available exploits are known. |
| ServiceNow has remediated a code injection vulnerability that was identified in the ServiceNow AI platform. This vulnerability could enable an unauthenticated user, in certain circumstances, to execute arbitrary code in the ServiceNow platform and gain access to, or modify, instance data beyond what was intended.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances.
We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| Tapo C120 v1 and C200 v5
contain an improper authentication vulnerability within the login
authentication verification module. An attacker on the local network can
exploit weaknesses in challenge parameter validation to bypass normal
authentication controls and obtain administrative session tokens.
Successful
exploitation may allow an attacker to subsequently execute privileged
management actions, enable unauthorized administrative access and temporary
disruption of device services, resulting in a denial-of-service (DoS)
condition. |
| openssl_encrypt versions before 1.4.9 fail to validate encryption status of embedded post-quantum private keys in file metadata. Attackers can craft files with unencrypted embedded PQC keys that decrypt under any password, bypassing authentication and producing attacker-chosen plaintext with false integrity verification. |
| An issue was discovered in ownCloud owncloud/core before 10.13.1. An attacker can access, modify, or delete any file without authentication if the username of a victim is known, and the victim has no signing-key configured. This occurs because pre-signed URLs can be accepted even when no signing-key is configured for the owner of the files. The earliest affected version is 10.6.0. |
| An improper authentication vulnerability in HiveServer2 SAML bearer-token validation in Apache Hive 4.0.0 through 4.2.0 (and later unreleased branches) on deployments using HTTP transport with hive.server2.authentication=SAML allows an unauthenticated network attacker to authenticate as an arbitrary Hive user and obtain an authenticated HiveServer2 session via a forged Authorization: Bearer token sent to the /cliservice HTTP endpoint. Users are recommended to upgrade to 4.2.1 version that includes the fix for this issue.
Access / authorization required: No Hive credentials, SAML IdP login, or knowledge of the server signing secret is required. The attacker only needs network reachability to the HiveServer2 HTTP port (typically /cliservice), directly or through a reverse proxy such as Apache Knox that forwards unauthenticated requests to HS2. The instance must have SAML authentication enabled in HTTP mode. Deployments where Knox handles SSO and HiveServer2 uses LDAP/Kerberos (not native SAML mode) are not affected by this specific issue. |
| A vulnerability was identified in liketrek TREK up to 3.0.22. The impacted element is the function findOrCreateUser of the file server/src/services/oidcService.ts of the component OIDC Service. Such manipulation leads to improper authentication. It is possible to launch the attack remotely. The attack requires a high level of complexity. The exploitability is regarded as difficult. Upgrading to version 3.1.0 is sufficient to resolve this issue. Upgrading the affected component is advised. |
| A security vulnerability has been detected in EFM ipTIME T24000M up to 14.20.0. This affects the function httpcon_check_session_url of the component Session Validation Handler. Such manipulation leads to improper authentication. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Filament is a collection of full-stack components for accelerated Laravel development. Prior to versions 4.12.0 and 5.7.0, incorrect challenge-form required-field handling allows app-based multi-factor authentication to be bypassed when recovery codes are enabled. Email-based multi-factor authentication is not affected. This issue is fixed in versions 4.12.0 and 5.7.0. |
| In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user who has access to a trusted distributed search private key could forge an administrative session token, access all relevant data, affect system integrity, and disrupt service availability. The vulnerability is possible because the distributed search authentication token endpoint does not require a signed request to identify a configured search peer, allowing the request to fall back to shared local key material. For more information see About distributed search (https://help.splunk.com/en/splunk-enterprise/administer/distributed-search/10.4/overview-of-distributed-search/about-distributed-search) and authentication.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/configuration-file-reference/10.4.2-configuration-file-reference/authentication.conf) in Splunk documentation. |
| A flaw has been found in itsourcecode Payroll System 1.0. The impacted element is the function create/read/update/delete of the file ajax.php of the component CRUD Operation Handler. Executing a manipulation of the argument action can lead to missing authentication. The attack may be performed from remote. The exploit has been published and may be used. |
| A vulnerability was found in liketrek TREK up to 3.0.22. Impacted is the function loginUser of the file server/src/services/authService.ts of the component Pre-2FA mfa_token Handler. The manipulation results in improper authentication. The attack may be performed from remote. Upgrading to version 3.1.0 is recommended to address this issue. Upgrading the affected component is recommended. |
| Improper Authentication vulnerability in Apache Tomcat meant that in some circumstances (e.g. CLIENT-CERT, SPNEGO) that a user would be authenticated even if the user did not exist in the DataSourceRealm.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Infrastructure Technology accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Infrastructure Technology accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| A flaw was found in search-v2-api. The authentication middleware in the affected component unconditionally skips authentication when a request includes an `Upgrade: websocket` header. An unauthenticated attacker can exploit this by sending a specially crafted HTTP POST request to the `/federated` endpoint with the `Upgrade: websocket` header. This allows the attacker to bypass authentication and access federated search results across all configured remote managed hubs, leading to information disclosure. |
