| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Use after free in Ozone in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| In ExtremeCloud IQ – Site Engine (XIQ‑SE) before 26.2.10, a vulnerability in the NAC administration interface allows an authenticated NAC administrator to retrieve masked sensitive parameters from HTTP responses. Although credentials appear redacted in the user interface, the application returns the underlying credential values in the HTTP response, enabling an authorized administrator to recover stored secrets that may exceed their intended access.
We would like to thank the Lockheed Martin Red Team for responsibly reporting this issue and working with us through coordinated disclosure. |
| A vulnerability allowing a Backup Viewer to perform remote code execution (RCE) as the postgres user. |
| Use after free in Chrome for iOS in Google Chrome on iOS prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| A privileged Ignition user, intentionally or otherwise, imports an external file with a specially crafted payload, which executes embedded malicious code. |
| An issue was discovered in Mbed TLS before 3.6.6 and 4.x before 4.1.0 and TF-PSA-Crypto before 1.1.0. There is a Predictable Seed in a Pseudo-Random Number Generator (PRNG). |
| Mbed TLS before 3.6.6 and TF-PSA-Crypto before 1.1.0 misuse seeds in a Pseudo-Random Number Generator (PRNG). |
| An issue was discovered in Mbed TLS through 3.6.5 and TF-PSA-Crypto 1.0.0. A buffer overflow can occur in public key export for FFDH keys. |
| The Honeywell IQ4x building management controller, exposes its full web-based HMI without authentication in its factory-default configuration. With no user module configured, security is disabled by design and the system operates under a System Guest (level 100) context, granting read/write privileges to any party able to reach the HTTP interface. Authentication controls are only enforced after a web user is created via U.htm, which dynamically enables the user module. Because this function is accessible prior to authentication, a remote user can create a new account with administrative read/write permissions enabling the user module and imposing authentication under attacker-controlled credentials. This action can effectively lock legitimate operators out of local and web-based configuration and administration. |
| An issue was discovered in Mbed TLS through 3.6.5 and 4.x through 4.0.0. There is a NULL pointer dereference in distinguished name parsing that allows an attacker to write to address 0. |
| An issue was discovered in Mbed TLS 3.x before 3.6.6. An out-of-bounds read vulnerability in mbedtls_ccm_finish() in library/ccm.c allows attackers to obtain adjacent CCM context data via invocation of the multipart CCM API with an oversized tag_len parameter. This is caused by missing validation of the tag_len parameter against the size of the internal 16-byte authentication buffer. The issue affects the public multipart CCM API in Mbed TLS 3.x, where mbedtls_ccm_finish() can be invoked directly by applications. In Mbed TLS 4.x versions prior to the fix, the same missing validation exists in the internal implementation; however, the function is not exposed as part of the public API. Exploitation requires application-level invocation of the multipart CCM API. |
| An issue was discovered in Mbed TLS 3.5.0 through 4.0.0. Client impersonation can occur while resuming a TLS 1.3 session. |
| In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_import_public_key does not check that the input buffer is at least 4 bytes before reading a 32-bit field, allowing a possible out-of-bounds read on truncated input. Specifically, an out-of-bounds read in mbedtls_lms_import_public_key allows context-dependent attackers to trigger a crash or limited adjacent-memory disclosure by supplying a truncated LMS (Leighton-Micali Signature) public-key buffer under four bytes. An LMS public key starts with a 4-byte type indicator. The function mbedtls_lms_import_public_key reads this type indicator before validating the size of its input. |
| Mbed TLS 3.5.x through 3.6.x before 3.6.2 has a buffer underrun in pkwrite when writing an opaque key pair |
| Mbed TLS before 2.28.10 and 3.x before 3.6.3, in some cases of failed memory allocation or hardware errors, uses uninitialized stack memory to compose the TLS Finished message, potentially leading to authentication bypasses such as replays. |
| An issue was discovered in Mbed TLS 3.5.x before 3.6.0. When negotiating the TLS version on the server side, it can fall back to the TLS 1.2 implementation of the protocol if it is disabled. If the TLS 1.2 implementation was disabled at build time, a TLS 1.2 client could put a TLS 1.3-only server into an infinite loop processing a TLS 1.2 ClientHello, resulting in a denial of service. If the TLS 1.2 implementation was disabled at runtime, a TLS 1.2 client can successfully establish a TLS 1.2 connection with the server. |
| Integer Overflow vulnerability in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2, allows attackers to cause a denial of service (DoS) via mbedtls_x509_set_extension(). |
| An issue was discovered in Mbed TLS 3.5.1. There is persistent handshake denial if a client sends a TLS 1.3 ClientHello without extensions. |
| An issue was discovered in Mbed TLS before 2.28.1 and 3.x before 3.2.0. In some configurations, an unauthenticated attacker can send an invalid ClientHello message to a DTLS server that causes a heap-based buffer over-read of up to 255 bytes. This can cause a server crash or possibly information disclosure based on error responses. Affected configurations have MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE enabled and MBEDTLS_SSL_IN_CONTENT_LEN less than a threshold that depends on the configuration: 258 bytes if using mbedtls_ssl_cookie_check, and possibly up to 571 bytes with a custom cookie check function. |
