Export limit exceeded: 370925 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370925 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370925 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-0639 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | 5.5 Medium |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. | ||||
| CVE-2024-0443 | 3 Fedoraproject, Linux, Redhat | 4 Fedora, Linux Kernel, Enterprise Linux and 1 more | 2026-07-21 | 5.5 Medium |
| A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. | ||||
| CVE-2026-64194 | 2026-07-21 | 7.5 High | ||
| Net::DNS versions through 1.55 for Perl allow Denial of Service via deep DNS compression pointer chains. Net::DNS::DomainName::decode follows RFC 1035 compression pointers by recursing into itself with no depth limit. It is possible to construct a name which saturates the call stack (at least with larger TCP responses), leading to a potential Denial of Service. The guard `$link < $offset` prevents forward and circular chains, but still allows arbitrarily long backward chains. The per-offset cache (`$cache`) is populated at the start of each call and short-circuits only re-traverses of the same offset - the initial descent through a fresh chain still recurses at full depth. A crafted packet can chain two-byte compression pointers so that each one points two bytes earlier than the previous, producing a chain length of `offset / 2`. For the 14-bit pointer field (max offset 16383) this gives up to ~8191 recursive frames. For a TCP DNS message the limit is the 16-bit length field (~32767 frames). Perl's default C stack handles only a few thousand frames; beyond that the process receives SIGSEGV or similar, which is a denial-of-service for any application parsing untrusted DNS data. The vulnerability is triggered by `Net::DNS::Packet->new(\$wire)` i.e. any point where the library decodes a DNS message from the network. | ||||
| CVE-2026-64193 | 2026-07-21 | 9.8 Critical | ||
| Net::DNS versions through 1.55 for Perl allow remote execution injection via EDNS EXTENDED ERROR. Net::DNS::RR::OPT::EXTENDED_ERROR::_decompose parses the EXTRA-TEXT field of an EDNS EXTENDED-ERROR option (RFC 8914) by tokenising the raw bytes and passing the result to Perl's eval. There is some escaping done for $ and @, but not for backticks. This can be exploited for command execution if $pkt->edns->option('EXTENDED-ERROR') is called in array context, for example with a payload of {0:`"<command>"`} in EXTRA-TEXT. | ||||
| CVE-2026-59197 | 1 Python-pillow | 1 Pillow | 2026-07-21 | 8.2 High |
| Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before rank-filter size validation and ImagingExpand() computes output dimensions with unchecked signed int arithmetic. This issue is fixed in version 12.3.0. | ||||
| CVE-2023-3640 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | 7 High |
| A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. | ||||
| CVE-2026-52837 | 1 Alextselegidis | 1 Easyappointments | 2026-07-21 | N/A |
| Easy!Appointments is a self hosted appointment scheduler. In versions up to and including 1.5.2, the booking reschedule view at `/index.php/booking/reschedule/{appointment_hash}` (handled by `Booking::index()`) embeds the entire customer record as inline JavaScript (`const vars = {... "customer_data": {...}, ...}`) without authentication and without field whitelisting. Anyone in possession of the 12-character `appointment_hash` — which appears in plain text in reschedule emails, confirmation page URLs, and operator-side calendar links — can read every column of that customer's row in the `ea_users` table. Version 1.6.0 contains a patch. | ||||
| CVE-2026-59891 | 2026-07-21 | 9.6 Critical | ||
| sigstore-js provides JavaScript libraries for interacting with Sigstore services. Prior to 0.7.1, getRegistryCredentials() reads credentials from the Docker config file and selects an entry by checking whether any configured auth key contains the target registry string. Because this is a substring match rather than an exact host match, credentials configured for one registry can be selected for and transmitted to a different registry whose hostname has a substring relationship with a configured auth key. This issue is fixed in version 0.7.1. | ||||
| CVE-2026-59204 | 1 Python-pillow | 1 Pillow | 2026-07-21 | 7.5 High |
| Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantially higher transient memory usage and trigger out-of-memory failures during decoding. This issue is fixed in version 12.3.0. | ||||
| CVE-2026-48761 | 2026-07-21 | N/A | ||
| Symfony is a PHP framework for web and console applications and a set of reusable PHP components. From 6.1.0 until 6.4.41, 7.4.13, and 8.0.13, UrlAttributeSanitizer::getSupportedAttributes() omitted URL-bearing attributes on <object>, <applet>, <iframe>, and <img>, and <meta http-equiv="refresh"> URLs inside content bypassed URL sanitization, allowing explicitly enabled elements or attributes to pass javascript: and similar payloads into sanitized output. This issue is fixed in versions 6.4.41, 7.4.13, and 8.0.13. | ||||
| CVE-2026-63986 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure The goto err label leads to: genlmsg_cancel(skb, ehdr); return ret; If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg. There's nothing to cancel, and passing an error pointer to genlmsg_cancel() would cause a crash. | ||||
| CVE-2026-13799 | 1 Google | 1 Chrome | 2026-07-21 | 8.1 High |
| Use after free in QUIC in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to potentially exploit heap corruption via malicious network traffic. (Chromium security severity: High) | ||||
| CVE-2026-63877 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time. | ||||
| CVE-2026-13823 | 1 Google | 1 Chrome | 2026-07-21 | 8.3 High |
| Use after free in Glic in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-13836 | 1 Google | 1 Chrome | 2026-07-21 | 6.1 Medium |
| Inappropriate implementation in CSS in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-63876 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally. | ||||
| CVE-2026-58624 | 2026-07-21 | 5.4 Medium | ||
| Improper input validation in sshd-git in Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH. Component org.apache.sshd:sshd-git provides though its GitPgmCommandFactory a way to configure an Apache MINA SSHD server such that SSH clients can remotely execute git commands via the JGit library on git repositories stored on the server. This GitPgmCommandFactory allowed a user authenticated via SSH to run any JGit command available, including commands that could write files at arbitrary places such as git archive with the --output option. Affected are SSH servers implemented with Apache MINA SSHD and using the GitPgmCommandFactory. If the GitPgmCommandFactory is not configured on the server, the server is not affected. It is recommended to upgrade affected servers to Apache MINA SSHD 2.19.0 or 3.0.0-M5, which fix this issue. The issue is fixed by restricting the available commands to a small whitelist of uncritical commands (such as git log). git archive is also allowed, but its --output argument is ignored and the archive is always sent through the SSH channel to the client. | ||||
| CVE-2026-56624 | 2026-07-21 | 7.3 High | ||
| Improper certificate validation in Apache MINA SSHD (server-side). Apache MINA SSHD is a Java library for client-side and server-side SSH. Server-side OpenSSH user certificate validation during user authentication in an Apache MINA SSHD server did not check for the unsupported force-command or verify-required options that could be embedded in the certificate, nor did it validate these options. As a result it was possible that a user could authenticate with such a certificate that included a force-command option but still was able to execute other commands. What other command exactly would be available to the user depends on the implementation of the server. This issue is fixed in Apache MINA SSHD 2.19.0 and 3.0.0-M5. Applications are advised to upgrade to these versions. The fix rejects OpenSSH user certificates that include these options, since Apache MINA SSHD implements neither force-command nor sk-*-cert-v01@openssh.com user certificates (which are the only ones for which verify-required would make sense). | ||||
| CVE-2026-63991 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. | ||||
| CVE-2026-64006 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ] | ||||