| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Git Credential Manager (GCM) is a secure Git credential helper built on .NET that runs on Windows, macOS, and Linux. The Git credential protocol is text-based over standard input/output, and consists of a series of lines of key-value pairs in the format `key=value`. Git's documentation restricts the use of the NUL (`\0`) character and newlines to form part of the keys or values. When Git reads from standard input, it considers both LF and CRLF as newline characters for the credential protocol by virtue of calling `strbuf_getline` that calls to `strbuf_getdelim_strip_crlf`. Git also validates that a newline is not present in the value by checking for the presence of the line-feed character (LF, `\n`), and errors if this is the case. This captures both LF and CRLF-type newlines. Git Credential Manager uses the .NET standard library `StreamReader` class to read the standard input stream line-by-line and parse the `key=value` credential protocol format. The implementation of the `ReadLineAsync` method considers LF, CRLF, and CR as valid line endings. This is means that .NET considers a single CR as a valid newline character, whereas Git does not. This mismatch of newline treatment between Git and GCM means that an attacker can craft a malicious remote URL. When a user clones or otherwise interacts with a malicious repository that requires authentication, the attacker can capture credentials for another Git remote. The attack is also heightened when cloning from repositories with submodules when using the `--recursive` clone option as the user is not able to inspect the submodule remote URLs beforehand. This issue has been patched in version 2.6.1 and all users are advised to upgrade. Users unable to upgrade should only interact with trusted remote repositories, and not clone with `--recursive` to allow inspection of any submodule URLs before cloning those submodules. |
| Discord-Bot-Framework-Kernel is a Discord bot framework built with interactions.py, featuring modular extension management and secure execution. Because of the nature of arbitrary user-submited code execution, this allows user to execute potentially malicious code to perform damage or extract sensitive information. By loading the module containing the following code and run the command, the bot token can be extracted. Then the attacker can load a blocking module to sabotage the bot (DDoS attack) and the token can be used to make the fake bot act as the real one. If the bot has very high privilege, the attacker basically has full control before the user kicks the bot. Any Discord user that hosts Discord-Bot-Framework-Kernel before commit f0d9e70841a0e3170b88c4f8d562018ccd8e8b14 is affected. Users are advised to upgrade. Users unable to upgrade may attempt to limit their discord bot's access via configuration options. |
| A vulnerability, which was classified as problematic, was found in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 7. This affects an unknown part of the file /api/GylOperator/LoadData. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A weakness has been identified in nutzam NutzBoot up to 2.6.0-SNAPSHOT. This affects the function getInputStream of the file nutzcloud/nutzcloud-literpc/src/main/java/org/nutz/boot/starter/literpc/impl/endpoint/http/HttpServletRpcEndpoint.java of the component LiteRpc-Serializer. Executing a manipulation can lead to deserialization. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit has been made available to the public and could be used for attacks. |
| An issue was discovered in mcp-neo4j 0.3.0 allowing attackers to obtain sensitive information or execute arbitrary commands via the SSE service. NOTE: the Supplier's position is that authentication is not mandatory for MCP servers, and the mcp-neo4j MCP server is only intended for use in a local environment where authentication realistically would not be needed. Also, the Supplier provides middleware to help isolate the MCP server from external access (if needed). |
| A vulnerability in the logging feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches, Cisco Nexus 9000 Series Switches in standalone NX-OS mode, Cisco UCS 6400 Fabric Interconnects, Cisco UCS 6500 Series Fabric Interconnects, and Cisco UCS 9108 100G Fabric Interconnects could allow an authenticated, local attacker access to sensitive information.
This vulnerability is due to improper logging of sensitive information. An attacker could exploit this vulnerability by accessing log files on the file system where they are stored. A successful exploit could allow the attacker to access sensitive information, such as stored credentials. |
| The Animation Addons for Elementor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.1.6 via the 'render' function in widgets/content-slider.php and widgets/tabs.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft Elementor template data. |
| In Search Guard versions 3.1.1 and earlier, Field Masking (FM) rules are improperly enforced on fields of type IP (IP Address).
While the content of these fields is properly redacted in the _source document returned by search operations, the results do return documents (hits) when searching based on a specific IP values. This allows to reconstruct the original contents of the field.
Workaround - If you cannot upgrade immediately, you can avoid the problem by using field level security (FLS) protection on fields of the affected types instead of field masking. |
| A specific flaw exists within the Bluetooth stack of the MIB3 infotainment. The issue results from the lack of proper validation of user-supplied data, which can result in an arbitrary channel disconnection. An attacker can leverage this vulnerability to cause a denial-of-service attack for every connected client of the infotainment device.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| A Gardyn Azure IoT Hub connection string is downloaded over an insecure HTTP connection in Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 leaving the string vulnerable to interception and modification through a Man-in-the-Middle attack. This may result in the attacker capturing device credentials or taking control of vulnerable home kits. |
| The following HP Card Readers B Models (X3D03B & Y7C05B) are potentially vulnerable to information disclosure, allowing prior user identity to be inherited under certain conditions —e.g., when an NFC device (such as a smartphone/smartwatches) is in proximity during a card swipe event. |
| GeoVision ASManager Windows desktop application with the version 6.1.2.0 or less (fixed in 6.2.0), is vulnerable to credentials disclosure due to improper memory handling in the ASManagerService.exe process. |
| Variable response times in the AWS Sign-in IAM user login flow allowed for the use of brute force enumeration techniques to identify valid IAM usernames in an arbitrary AWS account. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Crestron Automate VX allows Functionality Misuse.
When Enable Debug Images in Crestron Automate VX is active, snapshots of the captured video or portions thereof are stored locally on the system, and there is no visible indication that this is being done.
This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49. |
| The AuthKit library for React Router 7+ provides helpers for authentication and session management using WorkOS & AuthKit with React Router. In versions 0.6.1 and below, @workos-inc/authkit-react-router exposed sensitive authentication artifacts — specifically sealedSession and accessToken by returning them from the authkitLoader. This caused them to be rendered into the browser HTML. This issue is fixed in version 0.7.0. |
| In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. |
| An information-disclosure vulnerability exists in Fortra's GoAnywhere MFT application prior to version 7.7.0 that allows external access to the resources in certain admin root folders. |
| An information disclosure vulnerability exits in Sitecore JSS React Sample Application 11.0.0 - 14.0.1 that may cause page content intended for one user to be shown to another user. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation Mediawiki - SocialProfile Extension allows Functionality Misuse.This issue affects Mediawiki - SocialProfile Extension: from 1.39.X before 1.39.11, from 1.41.X before 1.41.3, from 1.42.X before 1.42.2. |
| A vulnerability was found in Provision-ISR SH-4050A-2, SH-4100A-2L(MM), SH-8100A-2L(MM), SH-16200A-2(1U), SH-16200A-5(1U) and NVR5-8200PX up to 20241220. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /server.js. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
