| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cross-site scripting (XSS) vulnerability in the Pulse Collaboration (Secure Meeting) user pages in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r18, 7.3 before 7.3r10, 7.4 before 7.4r8, and 8.0 before 8.0r1 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| Juniper Junos before 11.4R11, 12.1 before 12.1R9, 12.2 before 12.2R7, 12.3R4 before 12.3R4-S3, 13.1 before 13.1R4, 13.2 before 13.2R2, and 13.3 before 13.3R1, as used in MX Series and T4000 routers, allows remote attackers to cause a denial of service (PFE restart) via a crafted IP packet to certain (1) Trio or (2) Cassis-based Packet Forwarding Engine (PFE) modules. |
| The Secure Meeting (Pulse Collaboration) in Pulse Connect Secure (formerly Juniper Junos Pulse) before 7.1R22.1, 7.4, 8.0 before 8.0R11, and 8.1 before 8.1R3 allows remote authenticated users to bypass intended access restrictions and log into arbitrary meetings by leveraging a meeting id and meetingAppSun.jar. |
| The Secure Meeting (Pulse Collaboration) in Pulse Connect Secure (formerly Juniper Junos Pulse) before 7.1R22.1, 7.4, 8.0 before 8.0R11, and 8.1 before 8.1R3 provides different messages for attempts to join a meeting depending on the status of the meeting, which allows remote attackers to enumerate valid meeting ids via a series of requests. |
| The Juniper SRX Series services gateways with Junos OS 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, and 12.3X48 before 12.3X48-D15 do not properly implement the "set system ports console insecure" feature, which allows physically proximate attackers to gain administrative privileges by leveraging access to the console port. |
| J-Web in Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D35, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D10, 12.3X48 before 12.3X48-D10, 12.2 before 12.2R9, 12.3 before 12.3R7, 13.2 before 13.2R6, 13.2X51 before 13.2X51-D20, 13.3 before 13.3R5, 14.1 before 14.1R3, 14.1X53 before 14.1X53-D10, and 14.2 before 14.2R1 allows remote attackers to conduct clickjacking attacks via an X-Frame-Options header. |
| Juniper Junos OS before 13.3R9, 14.1R6 before 14.1R6-S1, and 14.1 before 14.1R7, when configured with VPLS routing-instances, allows remote attackers to obtain sensitive mbuf information by injecting a flood of Ethernet frames with IPv6 MAC addresses directly into a connected interface. |
| Juniper Junos OS before 13.2X51-D40, 14.x before 14.1X53-D30, and 15.x before 15.1X53-D20 on QFX5100 and QFX10002 switches do not have sufficient entropy, which makes it easier for remote attackers to defeat cryptographic encryption and authentication protection mechanisms via unspecified vectors. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage.
This issue affects Junos OS:
21.2 releases from 21.2R3-S5 before 21.2R3-S6.
This issue does not affect earlier or later releases. |
| A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition. The process crashes and restarts automatically.
When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash. This process manages and controls the configuration of broadband subscriber sessions and services. While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition.
This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled.
This issue affects Junos OS:
* All versions before 20.4R3-S5,
* from 21.1 before 21.1R3-S4,
* from 21.2 before 21.2R3-S3,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3,
* from 22.2 before 22.2R3,
* from 22.3 before 22.3R2; |
| A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).
In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart.
This issue affects Junos OS on MX Series:
* All version before 21.2R3-S6,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2. |
| A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device.
If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed.
This issue affects Junos OS:
* All versions before 20.4R3-S7,
* 21.1 versions before 21.1R3,
* 21.2 versions before 21.2R2-S1, 21.2R3,
* 21.3 versions before 21.3R1-S2, 21.3R2. |
| Cross-site scripting (XSS) vulnerability in Juniper SmartPass WLAN Security Management before 7.7 MR3 and 8.0 before MR2 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| Juniper Junos Space before 13.1R1.6, as used on the JA1500 appliance and in other contexts, does not properly restrict access to the list of user accounts and their MD5 password hashes, which makes it easier for remote authenticated users to obtain sensitive information via a dictionary attack, aka PR 879462. |
| Juniper Junos Space before 12.3P2.8, as used on the JA1500 appliance and in other contexts, includes a cleartext password in a configuration tab, which makes it easier for physically proximate attackers to obtain the password by reading the workstation screen. |
| Juniper NetScreen Firewall running ScreenOS 5.4, 6.2, or 6.3, when the Ping of Death screen is disabled, allows remote attackers to cause a denial of service via a crafted packet. |
| Cross-site scripting (XSS) vulnerability in the web administrative component in Juniper IDP allows remote attackers to inject arbitrary web script or HTML via unspecified vectors to the ACM web server. |
| Cross-site scripting (XSS) vulnerability in the Secure Access Service Web rewriting feature in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r17, 7.3 before 7.3r8, 7.4 before 7.4r6, and 8.0 before 8.0r1, when web rewrite is enabled, allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| Junos Pulse Secure Access Service (IVE) 7.1 before 7.1r5, 7.2 before 7.2r10, 7.3 before 7.3r6, and 7.4 before 7.4r3 and Junos Pulse Access Control Service (UAC) 4.1 before 4.1r8.1, 4.2 before 4.2r5, 4.3 before 4.3r6 and 4.4 before 4.4r3, when a hardware SSL acceleration card is enabled, allows remote attackers to cause a denial of service (device hang) via a crafted packet. |
| Multiple cross-site scripting (XSS) vulnerabilities in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS 7.1 before 7.1r15, 7.2 before 7.2r11, 7.3 before 7.3r6, and 7.4 before 7.4r3 allow (1) remote attackers to inject arbitrary web script or HTML via vectors involving login pages, and allow (2) remote authenticated users to inject arbitrary web script or HTML via vectors involving a support page. |
