| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in RUGGEDCOM RMC8388 V5.X (All versions < V5.10.1), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.1), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.1), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.1), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.1), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.1), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.1), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.1), RUGGEDCOM RSG907R (All versions < V5.10.1), RUGGEDCOM RSG908C (All versions < V5.10.1), RUGGEDCOM RSG909R (All versions < V5.10.1), RUGGEDCOM RSG910C (All versions < V5.10.1), RUGGEDCOM RSG920P V5.X (All versions < V5.10.1), RUGGEDCOM RSL910 (All versions < V5.10.1), RUGGEDCOM RST2228 (All versions < V5.10.1), RUGGEDCOM RST2228P (All versions < V5.10.1), RUGGEDCOM RST916C (All versions < V5.10.1), RUGGEDCOM RST916P (All versions < V5.10.1). Affected devices do not properly validate input during the TLS certificate upload process of the web service. This could allow an authenticated remote attacker to trigger a device crash and reboot, leading to a temporary Denial of Service on the device. |
| CWE-20: Improper Input Validation vulnerability exists that could cause a Denial Of Service when specific
crafted FTP command is sent to the device. |
| Git Credential Manager (GCM) is a secure Git credential helper built on .NET that runs on Windows, macOS, and Linux. The Git credential protocol is text-based over standard input/output, and consists of a series of lines of key-value pairs in the format `key=value`. Git's documentation restricts the use of the NUL (`\0`) character and newlines to form part of the keys or values. When Git reads from standard input, it considers both LF and CRLF as newline characters for the credential protocol by virtue of calling `strbuf_getline` that calls to `strbuf_getdelim_strip_crlf`. Git also validates that a newline is not present in the value by checking for the presence of the line-feed character (LF, `\n`), and errors if this is the case. This captures both LF and CRLF-type newlines. Git Credential Manager uses the .NET standard library `StreamReader` class to read the standard input stream line-by-line and parse the `key=value` credential protocol format. The implementation of the `ReadLineAsync` method considers LF, CRLF, and CR as valid line endings. This is means that .NET considers a single CR as a valid newline character, whereas Git does not. This mismatch of newline treatment between Git and GCM means that an attacker can craft a malicious remote URL. When a user clones or otherwise interacts with a malicious repository that requires authentication, the attacker can capture credentials for another Git remote. The attack is also heightened when cloning from repositories with submodules when using the `--recursive` clone option as the user is not able to inspect the submodule remote URLs beforehand. This issue has been patched in version 2.6.1 and all users are advised to upgrade. Users unable to upgrade should only interact with trusted remote repositories, and not clone with `--recursive` to allow inspection of any submodule URLs before cloning those submodules. |
| A path traversal vulnerability exists in Riverbed SteelHead VCX appliances (confirmed in VCX255U 9.6.0a) due to improper input validation in the log filtering functionality exposed via the management web interface. An authenticated attacker can exploit this flaw by submitting crafted filter expressions to the log_filter endpoint using the filterStr parameter. This input is processed by a backend parser that permits execution of file expansion syntax, allowing the attacker to retrieve arbitrary system files via the log viewing interface. |
| A vulnerability was found in Intelbras VIP S3020 G2, VIP S4020 G2, VIP S4020 G3 and VIP S4320 G2 up to 20241222 and classified as problematic. Affected by this issue is some unknown functionality of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor assesses that "the information disclosed in the URL is not sensitive or poses any risk to the user". |
| Pega Platform versions 7.1.0 through Infinity 25.1.0 are affected by a User Enumeration. This issue occurs during user authentication process, where a difference in response time could allow a remote unauthenticated user to determine if a username is valid or not. This only applies to deprecated basic-authentication feature and other more secure authentication mechanisms are recommended. A fix is being provided in the 24.1.4, 24.2.4, and 25.1.1 patch releases. Please note: Basic credentials authentication service type is deprecated started in 24.2 version: https://docs.pega.com/bundle/platform/page/platform/release-notes/security/whats-new-security-242.html. |
| Improper input validation for some Intel(R) PROSet/Wireless WiFi Software for Windows before version 23.160 within Ring 2: Device Drivers may allow a denial of service. Authorized adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (low) impacts. |
| A vulnerability was found in Keycloak. This issue may allow a privileged attacker to use a malicious payload as the permission while creating items (Resource and Permissions) from the admin console, leading to a stored cross-site scripting (XSS) attack. |
| A vulnerability was found in Vivotek NVR ND8422P, NVR ND9525P and NVR ND9541P 2.4.0.204/3.3.0.104/4.2.0.101. It has been classified as problematic. Affected is an unknown function of the component HTML Form Handler. The manipulation leads to inclusion of sensitive information in source code. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. |
| A vulnerability has been identified in SIMATIC S7-1200 CPU V1 family (incl. SIPLUS variants) (All versions < V2.0.3), SIMATIC S7-1200 CPU V2 family (incl. SIPLUS variants) (All versions < V2.0.3). The web server interface of affected devices improperly processes incoming malformed HTTP traffic at high rate. This could allow an unauthenticated remote attacker to force the device entering the stop/defect state, thus creating a denial of service condition. |
| EDK2 contains a vulnerability in BIOS where an attacker may cause “ Improper Input Validation” by local access. Successful exploitation of this vulnerability could alter control flow in unexpected ways, potentially allowing arbitrary command execution and impacting Confidentiality, Integrity, and Availability. |
| GeoVision ASManager Windows desktop application with the version 6.1.2.0 or less (fixed in 6.2.0), is vulnerable to credentials disclosure due to improper memory handling in the ASManagerService.exe process. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Crestron Automate VX allows Functionality Misuse.
When Enable Debug Images in Crestron Automate VX is active, snapshots of the captured video or portions thereof are stored locally on the system, and there is no visible indication that this is being done.
This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Crestron Automate VX allows Functionality Misuse.
There is no visible indication when the system is recording and recording can be enabled remotely via a network API.
This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49. |
| A Gardyn Azure IoT Hub connection string is downloaded over an insecure HTTP connection in Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 leaving the string vulnerable to interception and modification through a Man-in-the-Middle attack. This may result in the attacker capturing device credentials or taking control of vulnerable home kits. |
| A specific flaw exists within the Bluetooth stack of the MIB3 infotainment. The issue results from the lack of proper validation of user-supplied data, which can result in an arbitrary channel disconnection. An attacker can leverage this vulnerability to cause a denial-of-service attack for every connected client of the infotainment device.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| The AuthKit library for Remix provides convenient helpers for authentication and session management using WorkOS & AuthKit with Remix. In versions 0.14.1 and below, @workos-inc/authkit-remix exposed sensitive authentication artifacts — specifically sealedSession and accessToken — by returning them from the authkitLoader. This caused them to be rendered into the browser HTML. |
| The AuthKit library for React Router 7+ provides helpers for authentication and session management using WorkOS & AuthKit with React Router. In versions 0.6.1 and below, @workos-inc/authkit-react-router exposed sensitive authentication artifacts — specifically sealedSession and accessToken by returning them from the authkitLoader. This caused them to be rendered into the browser HTML. This issue is fixed in version 0.7.0. |
| Playloom Engine is an open-source, high-performance game development engine. Engine Beta v0.0.1 has a security vulnerability related to data storage, specifically when using the collaboration features. When collaborating with another user, they may have access to personal information you have entered into the software. This poses a risk to user privacy. The maintainers of Playloom Engine have temporarily disabled the collaboration feature until a fix can be implemented. When Engine Beta v0.0.2 is released, it is expected to contain a patch addressing this issue. Users should refrain from using the collaboration feature in the meantime. |
