| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability. |
| A vulnerability in the Deterministic Random Bit Generator (DRBG), also known as Pseudorandom Number Generator (PRNG), used in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. The vulnerability is due to insufficient entropy in the DRBG when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 Single Sign-On (SSO) for Clientless SSL VPN (WebVPN) and AnyConnect Remote Access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to successfully establish a VPN session to an affected device. The vulnerability is due to improper credential management when using NT LAN Manager (NTLM) or basic authentication. An attacker could exploit this vulnerability by opening a VPN session to an affected device after another VPN user has successfully authenticated to the affected device via SAML SSO. A successful exploit could allow the attacker to connect to secured networks behind the affected device. |
| A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied. |
| A vulnerability in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper management of authenticated sessions in the WebVPN portal. An attacker could exploit this vulnerability by authenticating with valid credentials and accessing a specific URL in the WebVPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a temporary DoS condition. |
| A vulnerability in a legacy capability that allowed for the preloading of VPN clients and plug-ins and that has been available in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary code with root-level privileges. Administrator-level privileges are required to exploit this vulnerability.
This vulnerability is due to improper validation of a file when it is read from system flash memory. An attacker could exploit this vulnerability by copying a crafted file to the disk0: file system of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device after the next reload of the device, which could alter system behavior. Because the injected code could persist across device reboots, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device. |
| Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets. |
| Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors. |
| Unspecified vulnerability in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.0 before 7.0(8)3, 7.1 before 7.1(2)78, 7.2 before 7.2(4)16, 8.0 before 8.0(4)6, and 8.1 before 8.1(1)13, when configured as a VPN using Microsoft Windows NT Domain authentication, allows remote attackers to bypass VPN authentication via unknown vectors. |
| Cisco PIX 500 and ASA 5500 Series Security Appliances 7.0 before 7.0(4.14) and 7.1 before 7.1(2.1), and the FWSM 2.x before 2.3(4.12) and 3.x before 3.1(3.24), when "inspect http" is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed HTTP traffic. |
| Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets. |
| Cisco Adaptive Security Appliance (ASA) Software before 8.4(1) on ASA 5500, ASA 5500-X, PIX, and FWSM devices allows local users to gain privileges via invalid CLI commands, aka Bug ID CSCtu74257 or EPICBANANA. |
| Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON. |
| Multiple cross-site scripting (XSS) vulnerabilities in the WebVPN feature in the Cisco VPN 3000 Series Concentrators and Cisco ASA 5500 Series Adaptive Security Appliances (ASA), when in WebVPN clientless mode, allow remote attackers to inject arbitrary web script or HTML via the domain parameter in (1) dnserror.html and (2) connecterror.html, aka bugid CSCsd81095 (VPN3k) and CSCse48193 (ASA). NOTE: the vendor states that "WebVPN full-network-access mode" is not affected, despite the claims by the original researcher. |
| A vulnerability in the data plane IP fragment handler of the Cisco Adaptive Security Appliance (ASA) CX Context-Aware Security module could allow an unauthenticated, remote attacker to cause the CX module to be unable to process further traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of IP fragments. An attacker could exploit this vulnerability by sending crafted fragmented IP traffic across the CX module. An exploit could allow the attacker to exhaust free packet buffers in shared memory (SHM), causing the CX module to be unable to process further traffic, resulting in a DoS condition. This vulnerability affects all versions of the ASA CX Context-Aware Security module. Cisco has not released and will not release software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCva62946. |
| The web-based GUI in Cisco Adaptive Security Appliance (ASA) CX Context-Aware Security 9.3(4.1.11) allows remote authenticated users to bypass intended access restrictions and obtain sensitive user information via an unspecified HTTP request, aka Bug ID CSCuv74105. |
| The virtualization layer in Cisco ASA FirePOWER Software before 5.3.1.2 and 5.4.x before 5.4.0.1 and ASA Context-Aware (CX) Software before 9.3.2.1-9 allows remote attackers to cause a denial of service (device reload) by rapidly sending crafted packets to the management interface, aka Bug IDs CSCus11007 and CSCun56954. |
| The VPN implementation in Cisco ASA Software 7.2 before 7.2(5.15), 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.15), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), 9.2 before 9.2(2.6), and 9.3 before 9.3(1.1) does not properly implement a tunnel filter, which allows remote authenticated users to obtain failover-unit access via crafted packets, aka Bug ID CSCuq28582. |
