| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| kas is a setup tool for bitbake based projects. Prior to 5.4, internal SSH key setup triggered by SSH_PRIVATE_KEY or SSH_PRIVATE_KEY_FILE creates ~/.ssh/config when no user-specific SSH configuration exists and adds a global Host * rule containing StrictHostKeyChecking no. In kas/libcmds.py, ssh_no_host_key_check() runs without checking ctx.managed_env, so the setting persists after kas exits and affects future SSH sessions by the same local user, extending beyond the intended short-lived continuous integration environment. A later SSH connection can therefore accept an attacker-controlled host key without verification, increasing the risk of a man-in-the-middle attack that compromises session confidentiality or integrity. This issue is fixed in version 5.4. |
| NVIDIA NemoClaw for Linux contains a vulnerability in its deployment process, where an attacker could cause improper certificate validation. A successful exploit of this vulnerability might lead to information disclosure, data tampering, code execution, and escalation of privileges. |
| Authentication Bypass by Capture-replay vulnerability in Spring Spring Security allows Spring Security's DPoPProofJwtDecoderFactory contains a cache-based replay attack vulnerability. The internal cache storing JWT ID claims has a strict size limit, allowing attackers to evict legitimate entries by flooding the server with dummy requests, then replay intercepted valid DPoP proofs.
This issue affects Spring Security: 7.1.0, from 7.0.0 through 7.0.6, and from 6.5.0 through 6.5.11. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker to escalate privileges by booting from a USB device with a valid root filesystem. This occurs because of insecure default settings in the Legacy GRUB Bootloader. |
| The BLOCKED access control list items that are evaluated to deny access on the the proxy protocol port can be bypassed completely when connecting over TCP or TLS and sending the query twice on connection that is kept open. |
| The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5. A maliciously crafted ZIP archive may bypass Gatekeeper checks. |
| A file quarantine bypass was addressed with additional checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5. A maliciously crafted ZIP archive may bypass Gatekeeper checks. |
| A flaw was found in the managedcluster-import-controller. The Certificate Signing Request (CSR) auto-approval logic improperly validates incoming CSRs, specifically by not inspecting the signer name or decoding the PEM-encoded x509 CSR. This vulnerability allows a privileged service account on a spoke cluster to submit a malicious CSR. Successful exploitation can lead to privilege escalation, enabling the attacker to obtain administrative credentials on the hub cluster. |
| CakePHP Authentication is an authentication plugin for CakePHP that can also be used in PSR-7 based applications. Versions before 2.11.2, from 3.0.0 through 3.3.6, and from 4.0.0 through 4.2.0 allow authentication bypass and potential CPU or memory exhaustion when CookieAuthenticator uses unencrypted, forgeable legacy tokens. This issue is fixed in versions 2.11.2, 3.3.7, and 4.2.1. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP management network protocol. An unauthenticated attacker on the management network can bypass authentication and perform any administrative operation on the managed system, including control of partition power state, configuration, and console access across all hosted partitions, resulting in a confidentiality, integrity, and availability impact to the managed system. |
| joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. Prior to version 1.7.3, JWTClaimsRegistry applies membership matching to list-valued iss and sub claims, allowing an array-valued iss that contains the expected issuer to pass an intended equality check and enabling issuer-validation bypass. This issue is fixed in version 1.7.3. |
| Centrifugo is an open-source scalable real-time messaging server. Prior to 6.9.0, Centrifugo copies the client-controlled protocol.ConnectRequest.headers map through OnClientConnecting in internal/client/handler.go, ConnectEvent.Headers, and SetEmulatedHeadersToContext. The requestHeaders path in internal/proxy/http.go, the requestMetadata path in internal/proxy/grpc.go, and the Consume path in internal/unigrpc/grpc.go can forward an allowlisted value as a trusted backend header or metadata value. A remote client can spoof a header such as x-trusted-user for connect, refresh, subscribe, publish, RPC, and related proxy calls when the backend relies on that header for authentication or authorization. The unidirectional gRPC transport has no transport-level HTTP header that can override the emulated value. This issue is fixed in version 6.9.0. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to improper certificate validation. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| Contour is a Kubernetes ingress controller using Envoy proxy. In versions 1.23.0 through 1.33.4, when an `HTTPProxy` is configured with incompatible combination of both `.spec.virtualhost.tls.enableFallbackCertificate: true` and `.spec.virtualhost.jwtProviders`, Contour does not reject the configuration. Consequently, requests from clients that do not send TLS SNI or send an unrecognized SNI (one that does not match any `HTTPProxy` FQDN) bypass configured JWT verification and are proxied to upstream services without a valid token. This issue is fixed in Contour v1.33.5. Contour now rejects and marks invalid any `HTTPProxy` resources that combine `.spec.virtualhost.tls.enableFallbackCertificate: true` with `.spec.virtualhost.jwtProviders`. Affected resources will receive a status condition with the error reason `TLSIncompatibleFeatures`. As a workaround, do not enable `.spec.virtualhost.tls.enableFallbackCertificate` on `HTTPProxy` resources that also define `.spec.virtualhost.jwtProviders`. Remove one of the two settings to avoid the invalid configuration. |
| OAuth2 Proxy honours a client-supplied X-Forwarded-Uri header when deciding whether a request may skip authentication, because the guard added for CVE-2026-40575 is inert in the default reverse-proxy configuration. GetRequestURI in pkg/requests/util/util.go prefers that header over the real request URI whenever CanTrustForwardedHeaders returns true, and isAllowedPath in oauthproxy.go matches the skip_auth_routes and skip_auth_regex allow list against the resulting path. CanTrustForwardedHeaders in pkg/apis/middleware/scope.go grants that trust when the caller's address is in the trusted proxy set, and buildTrustedProxyNetSet falls back to defaultTrustedProxyIPs, which is 0.0.0.0/0 and ::/0, whenever reverse proxy mode is enabled without trusted_proxy_ip configured. Every client is therefore treated as a trusted proxy. An unauthenticated attacker can request a protected upstream path while setting X-Forwarded-Uri to a value matching an allow-listed route, so the skip-auth decision is made against the spoofed value while the upstream receives the protected path unchanged. |
| Netty (io.netty:netty-handler) versions from 4.2.0.Final through 4.2.16.Final and versions through 4.1.136.Final disable TLS hostname verification on the SslProvider.OPENSSL client path when a plain (non-extended) X509TrustManager is used and Unsafe-based trust-manager wrapping is unavailable (Java 25+). In this configuration the OpenSSL client does not perform hostname verification, allowing a man-in-the-middle attacker to present a certificate issued for a different hostname that is accepted without validation. Fixed in 4.2.17.Final and 4.1.137.Final. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user positioned in the network path could read or alter all relevant data sent from the connector when Kerberos authentication is used with Hypertext Transfer Protocol (HTTP) Event Collector in Splunk Enterprise. The vulnerability is possible because the Kerberos authentication path does not apply the configured certificate validation options when it builds the HTTP client. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Security configurations for Splunk Connect for Kafka (https://help.splunk.com/en/splunk-enterprise/get-data-in/splunk-connect-for-kafka/2.2/configure/security-configurations-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to impersonate the TNC policy server and modify traffic due to improper certificate validation. |
| Authentication bypass by spoofing in Azure HorizonDB allows an unauthorized attacker to elevate privileges over a network. |
