| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Refactor bind path to use __free()
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix missing pointer check in hda_component_manager_init function
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code. |
| Due to missing authorization checks, SAP HCM My Timesheet Fiori 2.0 application allows an authenticated attacker with in-depth system knowledge to escalate privileges and perform activities that are otherwise restricted, resulting in a low impact on the integrity of the application. Confidentiality and availability are not impacted. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix mailbox API compatibility by negotiating supported features
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix null pointer dereference on zero-length checksum
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT. |
| A missing authorization vulnerability in Lexmark Cloud Services badge management allows attacker to reassign badges within their organization |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix received length check in big packets
Since commit 4959aebba8c0 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change. |
| An unauthenticated attacker can trick a local user into executing arbitrary commands by opening a deliberately manipulated project file with an affected engineering tool. These arbitrary commands are executed in the user context. |
| Fiori app Manage Payment Blocks does not perform the necessary authorization checks, allowing an attacker with basic user privileges to abuse functionalities that should be restricted to specific user groups.This issue could impact both the confidentiality and integrity of the application without affecting the availability. |
| Due to missing input validation, an attacker with high privilege access to ABAP reports could delete the content of arbitrary database tables, if the tables are not protected by an authorization group. This leads to a high impact on integrity and availability of the database but no impact on confidentiality. |
| SAP NetWeaver AS Java allows an attacker authenticated as a non-administrative user to use a flaw in an available service to upload an arbitrary file. This file when executed can lead to a full compromise of confidentiality, integrity and availability of the system. |
| A critical severity vulnerability has been identified in the ALPR Manager role of Security Center that could allow attackers to gain administrative access to the Genetec Security Center system. The Genetec engineering team discovered this issue internally. There is currently no evidence that this vulnerability has been exploited in the wild. |
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption.
This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. |
| An XSS issue was discovered in the Flag module before 1.x-3.6.2 for Backdrop CMS. Flag is a module that allows flags to be added to nodes, comments, users, and any other type of entity. It doesn't verify flag links before performing the flag action, or verify that the response returned was provided by the flag module. This can allow crafted HTML to result in Cross Site Scripting. This is mitigated by the fact that an attacker must have a role with permission to create links on the website, for example: create or edit comments or content with a filtered text format. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K. |
| Incorrect Implementation of Authentication Algorithm vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in CRESTRON TOUCHSCREENS x70 allows Relative Path Traversal.This issue affects TOUCHSCREENS x70: from 3.000.0110.001 before 3.001.0031.001.
Confirmed Affected Hardware: TSW-760, TSW-1060
Confirmed Affected Firmware: 3.002.1061 - (no fix released, product discontinued)
For x70
The Affected Firmware:- 3.000.0110.001 and versions below
The Fixed Firmware:- 3.001.0031.001 |
| A vulnerability exists in the ConsoleFindCommandMatchList function in libsymproc. so imported by ctpd that may lead to unauthorized execution of an attacker-defined file that gets prioritized by the ConsoleFindCommandMatchList.
A third-party researcher discovered that the ConsoleFindCommandMatchList enumerates the /dev/shm/symproc/c directory in alphabetical order to identify console commands. Permission levels are inferred from the integer values present in each command's file name.
Confirmed Affected Hardware: TSW-760, TSW-1060
Confirmed Affected Firmware: 3.002.1061
Fixed Firmware: no fixed released (product is discontinued and end of life)
For x70
The Affected Firmware:- 3.000.0110.001 and versions below
The Fixed Firmware:- 3.001.0031.001 |
