| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) |
| A vulnerability was detected in yzhao062 pyod up to 3.6.1. Affected is the function pyod.utils.persistence.load of the file pyod/utils/persistence.py. Performing a manipulation of the argument path results in deserialization. The attack can be initiated remotely. Upgrading to version 3.6.2 is able to address this issue. It is recommended to apply a patch to fix this issue. The pull request to fix this issue requires some minor changes. |
| The Social Login, Passkeys, Magic Link & Email OTP WordPress plugin before 1.4.1 does not enforce rate limiting or a working attempt lockout on its passwordless email one-time-password verification, and stores the short numeric codes in plaintext, allowing an unauthenticated attacker who knows a registered email address to brute-force the code and log in as that user, including an administrator, leading to full site takeover. |
| The All-in-One WP Migration and Backup WordPress plugin before 7.106 does not properly sanitise a user-supplied value before using it to build a file path, allowing unauthenticated attackers to create or append a log file in arbitrary locations outside its intended storage directory. |
| An out-of-memory flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFRasterScanlineSize64() API. This flaw allows a remote attacker to cause a denial of service via a crafted input with a size smaller than 379 KB. |
| A flaw was found in libtiff. A remote attacker could exploit this vulnerability by providing a specially crafted PixarLog-compressed TIFF image. This issue occurs when decoding Pixarlog codec images with the PIXARLOGDATAFMT_8BITABGR output format and a specific stride value, leading to a heap-based buffer overflow. This could potentially result in arbitrary code execution or a denial of service (DoS). |
| Meshtastic is an open source mesh networking solution. Prior to version 2.7.23.b246bcd, a single node advertising a User.long_name that contains a malformed character encoding can render other radios unusable over BLE when managed through the iOS app. The malformed name does not need to be maliciously crafted — it can arise from ordinary buffer truncation and has been observed occurring naturally in the wild. At least one code path could place a null terminator in the middle of a multibyte sequence, leaving a malformed User.long_name in the node database. The problem surfaced downstream: the iOS app enforced encoding validation and therefore cannot parse a node database once it contains a poisoned entry. This caused BLE sync to enter a fail/retry loop, resulting in loss of control over the affected device. For a typical user managing their radio with the iOS app, the device becomes effectively unusable until the poisoned node ages out of the on-device database, or unless they have an alternate management path (e.g., the Python CLI, which can be used to identify and remove the offending entries manually). Because the malformed name propagates through the mesh, the temporary presence of a single affected node can degrade BLE management for iOS users across a wide geographical area for an extended period. Less technical users have no straightforward recovery path. Starting in version 2.7.23.b246bcd, the firmware has added input sanitization and regression tests demonstrating recovery for already-poisoned devices. The apps have also taken steps to ensure more graceful handling of malformed encoding sequences as well. |
| In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, password_verify() function may accept some invalid Blowfish hashes as valid. If such invalid hash ever ends up in the password database, it may lead to an application allowing any password for this entry as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
sysfs: don't remove existing directory on update failure
When sysfs_update_group() is called for a named group and create_files()
fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on
the group directory. In the update path, kn was obtained via
kernfs_find_and_get() and refers to a directory that already existed
before this call. Removing it silently destroys a sysfs group that the
caller did not create.
Only remove the directory if we created it ourselves. On update failure
the directory remains as it is left empty by remove_files() inside
create_files(), but can be repopulated by a retry. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break()
damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without
calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix
the issue by calling mem_cgroup_iter_break() before the break.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Allocate runtime workqueue before ACPI init
Since commit
5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")
ACPI PRM calls are delegated to a workqueue which runs in a kernel
thread, making it easier to detect and mitigate faulting memory accesses
performed by the firmware.
Rafael reports that such PRM accesses may occur before efisubsys_init()
executes, which is where the workqueue is allocated, leading to NULL
pointer dereferences. Since acpi_init() [which triggers the early PRM
accesses] executes as a subsys_initcall() as well, and has its own
dependencies that may be sensitive to initcall ordering, deferring
acpi_init() is not an option.
So instead, split off the workqueue allocation into its own postcore
initcall, as this is the only missing piece to allow EFI runtime calls
to be made. This ensures that EFI runtime call (including PRM calls) are
accessible to all code running at subsys_initcall() level. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: fix memory block reference leak in poison accounting
memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory_hotplug: fix memory block reference leak on remove
Patch series "mm: Fix memory block leaks and locking", v2.
This series fixes two memory block device reference leaks and one locking
issue around the per-memory_block hwpoison counter.
This patch (of 2):
remove_memory_blocks_and_altmaps() looks up each memory block with
find_memory_block(), which acquires a reference to the memory block
device.
That reference is never dropped on this path, resulting in a leaked device
reference when removing memory blocks and their altmaps. Drop the
reference after retrieving mem->altmap and clearing mem->altmap, before
removing the memory block device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: fix potential memory leaks in ipc_imem_init()
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet/pep: disable BH around forwarded sk_receive_skb()
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: advance loop vars in cfg80211_merge_profile()
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
In paths where tracing_map_elt_alloc() failed to allocate objects,
the map->ops->elt_alloc() call was never successful. In this case,
map->ops->elt_free() should not be called. |
