| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs: afs: revert mmap_prepare() change
Partially reverts commit 9d5403b1036c ("fs: convert most other
generic_file_*mmap() users to .mmap_prepare()").
This is because the .mmap invocation establishes a refcount, but
.mmap_prepare is called at a point where a merge or an allocation failure
might happen after the call, which would leak the refcount increment.
Functionality is being added to permit the use of .mmap_prepare in this
case, but in the interim, we need to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: take vmap_purge_lock in shrinker
decay_va_pool_node() can be invoked concurrently from two paths:
__purge_vmap_area_lazy() when pools are being purged, and the shrinker via
vmap_node_shrink_scan().
However, decay_va_pool_node() is not safe to run concurrently, and the
shrinker path currently lacks serialization, leading to races and possible
leaks.
Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker
path to ensure serialization with purge users. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix rxkad crypto unalignment handling
Fix handling of a packet with a misaligned crypto length. Also handle
non-ENOMEM errors from decryption by aborting. Further, remove the
WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can
still be emitted). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: acomp - fix wrong pointer stored by acomp_save_req()
acomp_save_req() stores &req->chain in req->base.data. When
acomp_reqchain_done() is invoked on asynchronous completion, it receives
&req->chain as the data argument but casts it directly to struct
acomp_req. Since data points to the chain member, all subsequent field
accesses are at a wrong offset, resulting in memory corruption.
The issue occurs when an asynchronous hardware implementation, such as
the QAT driver, completes a request that uses the DMA virtual address
interface (e.g. acomp_request_set_src_dma()). This combination causes
crypto_acomp_compress() to enter the acomp_do_req_chain() path, which
sets acomp_reqchain_done() as the completion callback via
acomp_save_req().
With KASAN enabled, this manifests as a general protection fault in
acomp_reqchain_done():
general protection fault, probably for non-canonical address 0xe000040000000000
KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007]
RIP: 0010:acomp_reqchain_done+0x15b/0x4e0
Call Trace:
<IRQ>
qat_comp_alg_callback+0x5d/0xa0 [intel_qat]
adf_ring_response_handler+0x376/0x8b0 [intel_qat]
adf_response_handler+0x60/0x170 [intel_qat]
tasklet_action_common+0x223/0x820
handle_softirqs+0x1ab/0x640
</IRQ>
Fix this by storing the request itself in req->base.data instead of
&req->chain, so that acomp_reqchain_done() receives the correct pointer.
Simplify acomp_restore_req() accordingly to access req->chain directly. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1
Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want
to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the
hypercall is something other than one of the supported Hyper-V hypercalls.
When all of the above conditions are met, KVM will intercept VMMCALL but
never forward it to L1, i.e. will let L2 make hypercalls as if it were L1.
The TLFS says a whole lot of nothing about this scenario, so go with the
architectural behavior, which says that VMMCALL #UDs if it's not
intercepted.
Opportunistically do a 2-for-1 stub trade by stub-ifying the new API
instead of the helpers it uses. The last remaining "single" stub will
soon be dropped as well.
[sean: rewrite changelog and comment, tag for stable, remove defunct stubs] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix string overrun due to missing termination
When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm
Snapdragon X1 we see a string buffer overrun:
BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535)
Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120
CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025
Call trace:
show_stack (arch/arm64/kernel/stacktrace.c:501) (C)
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
__asan_report_load1_noabort (mm/kasan/report_generic.c:378)
aa_dfa_match (security/apparmor/match.c:535)
match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336)
match_mnt (security/apparmor/mount.c:371)
aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4))
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
Allocated by task 2120:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_alloc_info (mm/kasan/generic.c:571)
__kasan_kmalloc (mm/kasan/common.c:419)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272)
aa_get_buffer (security/apparmor/lsm.c:2201)
aa_bind_mount (security/apparmor/mount.c:442)
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
The buggy address belongs to the object at ffff0008901ca000
which belongs to the cache kmalloc-rnd-06-8k of size 8192
The buggy address is located 0 bytes to the right of
allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0
flags: 0x8000000000000040(head|zone=2)
page_type: f5(slab)
raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix overlayfs mmap() and mprotect() access checks
The existing SELinux security model for overlayfs is to allow access if
the current task is able to access the top level file (the "user" file)
and the mounter's credentials are sufficient to access the lower
level file (the "backing" file). Unfortunately, the current code does
not properly enforce these access controls for both mmap() and mprotect()
operations on overlayfs filesystems.
This patch makes use of the newly created security_mmap_backing_file()
LSM hook to provide the missing backing file enforcement for mmap()
operations, and leverages the backing file API and new LSM blob to
provide the necessary information to properly enforce the mprotect()
access controls. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: only d_add() negative dentries when they are unhashed
Ceph can call d_add(dentry, NULL) on a negative dentry that is already
present in the primary dcache hash.
In the current VFS that is not safe. d_add() goes through __d_add()
to __d_rehash(), which unconditionally reinserts dentry->d_hash into
the hlist_bl bucket. If the dentry is already hashed, reinserting the
same node can corrupt the bucket, including creating a self-loop.
Once that happens, __d_lookup() can spin forever in the hlist_bl walk,
typically looping only on the d_name.hash mismatch check and
eventually triggering RCU stall reports like this one:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829
rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192)
CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023
RIP: 0010:__d_lookup+0x46/0xb0
Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f
RSP: 0018:ff745a70c8253898 EFLAGS: 00000282
RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966
RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0
RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89
R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0
R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f
FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0
PKRU: 55555554
Call Trace:
<TASK>
lookup_fast+0x9f/0x100
walk_component+0x1f/0x150
link_path_walk+0x20e/0x3d0
path_lookupat+0x68/0x180
filename_lookup+0xdc/0x1e0
vfs_statx+0x6c/0x140
vfs_fstatat+0x67/0xa0
__do_sys_newfstatat+0x24/0x60
do_syscall_64+0x6a/0x230
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is reachable with reused cached negative dentries. A Ceph lookup
or atomic_open can be handed a negative dentry that is already hashed,
and fs/ceph/dir.c then hits one of two paths that incorrectly assume
"negative" also means "unhashed":
- ceph_finish_lookup():
MDS reply is -ENOENT with no trace
-> d_add(dentry, NULL)
- ceph_lookup():
local ENOENT fast path for a complete directory with shared caps
-> d_add(dentry, NULL)
Both paths can therefore re-add an already-hashed negative dentry.
Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only
calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn)
is true.
Fix both fs/ceph/dir.c sites the same way: only call d_add() for a
negative dentry when it is actually unhashed. If the negative dentry
is already hashed, leave it in place and reuse it as-is.
This preserves the existing behavior for unhashed dentries while
avoiding d_hash list corruption for reused hashed negatives. |
| In the Linux kernel, the following vulnerability has been resolved:
rxgk: Fix potential integer overflow in length check
Fix potential integer overflow in rxgk_extract_token() when checking the
length of the ticket. Rather than rounding up the value to be tested
(which might overflow), round down the size of the available data. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex
vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the
vdev->cdx_irqs array based on its value, but provides no serialization
against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race
such that one observes config_msi as set while another clears it and
frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free
of the cdx_irqs array.
Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in
vfio_cdx_set_msi_trigger(), which is the single chokepoint through
which all updates to config_msi, cdx_irqs, and msi_count flow, covering
both the ioctl path and the close-device cleanup path. This keeps the
test of config_msi atomic with the subsequent enable, disable, or
trigger operations.
Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part
of this change: the optimization it provided is redundant with the
!config_msi early-return inside vfio_cdx_msi_disable(), and leaving the
test in place would be an unsynchronized read of state the new lock is
meant to protect. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix re-decryption of RESPONSE packets
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Stop job scheduling across aie2_release_resource()
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF and double free in smb2_open_file()
Zero out @err_iov and @err_buftype before retrying SMB2_open() to
prevent an UAF bug if @data != NULL, otherwise a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI) |
