| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A remote code execution (RCE) vulnerability exists in the berriai/litellm project due to improper control of the generation of code when using the `eval` function unsafely in the `litellm.get_secret()` method. Specifically, when the server utilizes Google KMS, untrusted data is passed to the `eval` function without any sanitization. Attackers can exploit this vulnerability by injecting malicious values into environment variables through the `/config/update` endpoint, which allows for the update of settings in `proxy_server_config.yaml`. |
| The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| Kafka UI is an Open-Source Web UI for Apache Kafka Management. Kafka UI API allows users to connect to different Kafka brokers by specifying their network address and port. As a separate feature, it also provides the ability to monitor the performance of Kafka brokers by connecting to their JMX ports. JMX is based on the RMI protocol, so it is inherently susceptible to deserialization attacks. A potential attacker can exploit this feature by connecting Kafka UI backend to its own malicious broker. This vulnerability affects the deployments where one of the following occurs: 1. dynamic.config.enabled property is set in settings. It's not enabled by default, but it's suggested to be enabled in many tutorials for Kafka UI, including its own README.md. OR 2. an attacker has access to the Kafka cluster that is being connected to Kafka UI. In this scenario the attacker can exploit this vulnerability to expand their access and execute code on Kafka UI as well. Instead of setting up a legitimate JMX port, an attacker can create an RMI listener that returns a malicious serialized object for any RMI call. In the worst case it could lead to remote code execution as Kafka UI has the required gadget chains in its classpath. This issue may lead to post-auth remote code execution. This is particularly dangerous as Kafka-UI does not have authentication enabled by default. This issue has been addressed in version 0.7.2. All users are advised to upgrade. There are no known workarounds for this vulnerability. These issues were discovered and reported by the GitHub Security lab and is also tracked as GHSL-2023-230. |
| A vulnerability ( CVE-2024-38229 https://www.cve.org/CVERecord ) exists in EOL ASP.NET when closing an HTTP/3 stream while application code is writing to the response body, a race condition may lead to use-after-free, resulting in Remote Code Execution.
Per CWE-416: Use After Free https://cwe.mitre.org/data/definitions/416.html , Use After Free is when a product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
This issue affects EOL ASP.NET 6.0.0 <= 6.0.36 as represented in this CVE, as well as 8.0.0 <= 8.0.8, 9.0.0-preview.1.24081.5 <= 9.0.0.RC.1 as represented in CVE-2024-38229 https://www.cve.org/CVERecord .
Additionally, if you've deployed self-contained applications https://docs.microsoft.com/dotnet/core/deploying/#self-contained-deployments-scd targeting any of the impacted versions, these applications are also vulnerable and must be recompiled and redeployed.
NOTE: This CVE only represents End Of Life (EOL) software components. The vendor, Microsoft, has indicated there will be no future updates nor support provided upon inquiry. |
| calculator-boilerplate v1.0 was discovered to contain a remote code execution (RCE) vulnerability via the eval function at /routes/calculator.js. This vulnerability allows attackers to execute arbitrary code via a crafted payload injected into the input field. |
| The Honeywell Experion PKS
and OneWireless WDM
contains a Deployment of Wrong Handler
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to
Input Data Manipulation,
which could result in incorrect handling of packets leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions prior to 16.0.92 for FreePBX 16 and versions prior to 17.0.6 for FreePBX 17, the Endpoint Manager module contains an authenticated arbitrary file upload vulnerability affecting the fwbrand parameter. The fwbrand parameter allows an attacker to change the file path. Combined, these issues can result in a webshell being uploaded. Authentication with a known username is required to exploit this vulnerability. Successful exploitation allows authenticated users to upload arbitrary files to attacker-controlled paths on the server, potentially leading to remote code execution. This issue has been patched in version 16.0.92 for FreePBX 16 and version 17.0.6 for FreePBX 17. |
| DIR-822 Rev. B Firmware v2.02KRB09 and DIR-822-CA Rev. B Firmware v2.03WWb01 suffer from a LAN-Side Unauthenticated Remote Code Execution (RCE) vulnerability elevated from HNAP Stack-Based Buffer Overflow. |
| Remote code execution vulnerability in RSForm!pro component 3.0.0 - 3.3.14 for Joomla was discovered. The issue occurs within the submission export feature and requires administrative access to the export feature. |
| Inadequate input validation exposes the system to potential remote code execution (RCE) risks. Attackers can exploit this vulnerability by appending shell commands to the Speed-Measurement feature, enabling unauthorized code execution. |
| Ratta SuperNote A6 X2 Nomad before December 2024 allows remote code execution because an arbitrary firmware image (signed with debug keys) can be sent to TCP port 60002, and placed into the correct image-update location as a consequence of both directory traversal and unintended handling of concurrency. |
| Tencent MimicMotion create_pipeline Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent MimicMotion. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the create_pipeline function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27208. |
| Tencent FaceDetection-DSFD resnet Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent FaceDetection-DSFD. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the resnet endpoint. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27197. |
| A remote attacker using the insecure upload functionality will be able to overwrite any Python file and get Remote Code Execution. As for the affected products/models/versions, see the reference URL. |
| Remote Command program allows an attacker to get Remote Code Execution. As for the affected products/models/versions, see the reference URL. |
| Remote Command program allows an attacker to get Remote Code Execution by overwriting existing Python files containing executable code. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point.
https://www.toshibatec.com/contacts/products/
As for the affected products/models/versions, see the reference URL. |
| Remote Command program allows an attacker to get Remote Code Execution. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point.
https://www.toshibatec.com/contacts/products/
As for the affected products/models/versions, see the reference URL. |
| An attacker can get Remote Code Execution by overwriting files. Overwriting files is enable by falsifying package name variable. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point.
https://www.toshibatec.com/contacts/products/
As for the affected products/models/versions, see the reference URL. |
| RedisBloom adds a set of probabilistic data structures to Redis. Starting in version 2.0.0 and prior to version 2.4.7 and 2.6.10, specially crafted `CF.LOADCHUNK` commands may be used by authenticated users to perform heap overflow, which may lead to remote code execution. The problem is fixed in RedisBloom 2.4.7 and 2.6.10.
|
| An issue was discovered in RDoc 6.3.3 through 6.6.2, as distributed in Ruby 3.x through 3.3.0. When parsing .rdoc_options (used for configuration in RDoc) as a YAML file, object injection and resultant remote code execution are possible because there are no restrictions on the classes that can be restored. (When loading the documentation cache, object injection and resultant remote code execution are also possible if there were a crafted cache.) The main fixed version is 6.6.3.1. For Ruby 3.0 users, a fixed version is rdoc 6.3.4.1. For Ruby 3.1 users, a fixed version is rdoc 6.4.1.1. For Ruby 3.2 users, a fixed version is rdoc 6.5.1.1. |
