| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uncontrolled Resource Consumption vulnerability in ash-project ash lets a slow asynchronous read spin a scheduler thread at full CPU while the framework waits for it.
Ash.Actions.Read.AsyncLimiter.await_at_least_one/1 (lib/ash/actions/read/async_limiter.ex) waited for concurrent async read tasks by polling each with Task.yield(task, 0) in a tight loop rather than blocking. While every outstanding task is still running (a slow related-data load or calculation), the loop returns immediately and repeats, busy-spinning and holding a BEAM scheduler at full CPU for the whole duration of the slow read; concurrent slow reads tie up further schedulers. The fix waits with Task.yield_many (a non-blocking sweep followed by a blocking wait with timeout: :infinity), so the process sleeps until a task completes instead of spinning.
This issue affects ash: from 2.19.0 before 3.32.2. |
| Uncontrolled Resource Consumption vulnerability in ash-project ash lets an attacker exhaust node memory by matching a filter that spans multiple to-many relationships in memory.
Ash.Filter.Runtime matches a filter against an in-memory record by first expanding the record into combinations of its related rows. flatten_relationships/2 (lib/ash/filter/runtime.ex) eagerly built the full Cartesian product across the filter's to-many relationship paths, so a record with K to-many relationships of M rows each materialized on the order of M^K scenarios before any predicate was checked. A filter or dataset that reaches several sizeable to-many relationships therefore allocates memory combinatorially and can exhaust the node. The fix streams the expansion lazily and short-circuits on the first matching scenario, bounding the work.
This issue affects ash: from 1.29.0-rc0 before 3.32.2. |
| Improper Validation of Specified Type of Input vulnerability in ash-project ash lets an attacker confuse the stored type tag of an Ash.Type.Union value that uses storage: :map_with_tag, bypassing that member's validation and any tag-based authorization.
For a union with storage: :map_with_tag, each member is identified in storage by a configured tag and tag_value. Ash.Type.Union.dump_to_native/2 (lib/ash/type/union.ex) did not force the configured tag when writing the value, so a tag carried in the submitted value was persisted verbatim. An attacker can therefore store a value whose data belongs to one member but whose tag names a different member. On read the value is re-selected by its tag and treated as the incompatible member (a type confusion), bypassing the real member's constraints and any logic or policy that branches on the union tag. The fix drops any incoming tag and forces the configured tag value on dump.
This issue affects ash: from 2.14.18 before 3.32.2. |
| A critical local privilege escalation via OS command injection vulnerability has been discovered in Plesk for Linux, affecting all versions from 18.0.34 before 18.0.79.9 and 18.0.80.5. The vulnerability allows a customer or reseller with shell access (or allowed to change their own shell access) to elevate privileges to the root account on the hosting server. |
| The WPLP Cookie Consent – Cookie Banner & Consent Management for GDPR, CCPA & Google Consent Mode plugin for WordPress is vulnerable to arbitrary file upload due to missing file type validation in the saas_upload_logo() function combined with an authorization bypass on the WPLP connector REST endpoints in all versions up to, and including, 4.4.1. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| Improper Input Validation vulnerability in ash-project ash fails to enforce the outer array constraints on a doubly-nested {:array, {:array, type}} attribute, letting invalid input pass validation.
Ash.Type.apply_constraints/3 (lib/ash/type/type.ex) handled the {:array, {:array, type}} case by mapping only the inner {:array, type} constraints over each element, so constraints declared on the outer array (such as min_length, max_length, and nil_items?) were never applied. An attacker could submit an outer list that violates those constraints (too many elements, or nil entries where disallowed) and have it accepted and persisted. The fix enforces the outer array constraints and adds explicit handling for nil and non-list inputs.
This issue affects ash: from 2.16.1 before 3.32.2. |
| Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash discloses the stored value of a confirmed field to an actor who fails its confirmation check.
Ash.Resource.Validation.Confirm's atomic implementation (atomic/2 in lib/ash/resource/validation/confirm.ex) built the mismatch error with its value set to the field being confirmed. When the actor supplies only the confirmation argument and not the field itself, value resolves through atomic_ref/2 to the field's current stored value, so the mismatch error echoes that stored value back to the actor. Against a confirmation guarding a sensitive attribute, an actor can submit a deliberately wrong confirmation and read the real value from the returned error. The fix reports the actor-supplied confirmation in the error instead of the stored field value.
This issue affects ash: from 2.17.20 before 3.32.2. |
| Improper Input Validation vulnerability in ash-project ash allows an attacker to persistently deny reads of a record by storing a non-version-7 UUID in an Ash.Type.UUIDv7 attribute.
Ash.Type.UUIDv7.cast_input/2 accepts any well-formed UUID string, including non-version-7 UUIDs, and stores it as a 16-byte binary. On read, cast_stored/2 (lib/ash/type/uuid_v7.ex) routes the stored binary back through cast_input/2, which since an input-validation tightening in v3.6.3 matches only version-7 (and optionally version-4) 16-byte binaries and otherwise expects a 36-character string. A stored non-v7 16-byte binary matches neither clause and returns :error, so every later read of that record fails. An attacker able to set such an attribute poisons the row permanently. The fix decodes any 16-byte stored binary directly in cast_stored/2.
This issue affects ash: from 3.6.3 before 3.32.2. |
| Integer Overflow or Wraparound vulnerability in ash-project ash lets an attacker corrupt a stored vector and crash later reads of it by submitting a vector with more than 65,535 elements.
Ash.Vector.new/1 (lib/ash/vector.ex) encodes a vector as <<dim::unsigned-16, 0::unsigned-16>> followed by the element floats, packing the element count into a 16-bit field without checking its range. A list of more than 65,535 elements wraps the dimension modulo 65,536, so the encoded header records a dimension that disagrees with the number of stored floats. from_binary/1 later reads binary-size(dim)-unit(32) from the wrapped header, so every read of the corrupted value misparses and raises, denying access to the affected record. The fix rejects any vector whose dimension exceeds 65,535.
This issue affects ash: from 2.14.13 before 3.32.2. |
| Incorrect Behavior Order: Validate Before Canonicalize vulnerability in ash-project ash lets an attacker store a case-insensitive string value that violates its length or match constraints.
Ash.Type.CiString.apply_constraints/2 (lib/ash/type/ci_string.ex) validated the max_length, min_length, and match constraints against the value as submitted, while the type case-folds the string (per its casing) for storage and comparison. Because validation ran before folding, an attacker can submit a value whose folded form breaks a constraint but whose original form passes: for example, against a match pattern requiring uppercase, an uppercase value that is stored lowercased persists a value the pattern rejects. The fix case-folds the value at the start of apply_constraints/2, so the constraints are checked against the form that is actually stored.
This issue affects ash: from 1.29.0-rc0 before 3.32.2. |
| Uncontrolled Resource Consumption vulnerability in ash-project ash allows an attacker to force an expensive regular expression to run on input that a length constraint should have already rejected.
Ash.Type.String.apply_constraints/2 (lib/ash/type/string.ex) evaluated the :match regex regardless of the min_length and max_length constraints on the same attribute. Because the length check did not gate the regex, an over-length value that the length constraint rejects still had the pattern applied to it, so the length limit that would otherwise bound the work never constrained the regex input. Against a backtracking pattern this yields catastrophic regex evaluation on attacker-sized input, and even a linear pattern runs on arbitrarily large input, consuming CPU per request. The fix skips the :match regex whenever a length constraint is violated, making the two checks order-independent.
This issue affects ash: from 0.10.0 before 3.32.2. |
| jackson-databind's deserializer for java.nio.file.Path resolves an attacker-supplied URI without restricting the URI scheme. In JDKFromStringDeserializer.NioPathHelper.deserialize, a string bound from untrusted JSON is passed to new URI(value) and then to Path.of(uri). When that throws FileSystemNotFoundException, the code enumerates ServiceLoader<FileSystemProvider> and calls provider.getPath(uri) on the first provider whose scheme matches the attacker-chosen scheme. Untrusted JSON can therefore select and drive an arbitrary registered FileSystemProvider during readValue under a default JsonMapper, and forces provider class loading at the same time. With only the JDK built-in providers (file, jar/zipfs) present, the resolved path is inert and no mount or network I/O occurs; further impact requires a side-effecting third-party FileSystemProvider on the classpath. This affects com.fasterxml.jackson.core:jackson-databind from 2.8.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2. Binding java.nio.file.Path from untrusted JSON should be avoided regardless of version. |
| Improper Validation of Specified Quantity in Input vulnerability in ash-project ash allows an attacker to submit a non-finite decimal value that bypasses numeric bounds constraints or fails later operations on the value.
Ash.Type.Decimal cast input through Ecto's decimal cast in cast_input/2 and cast_stored/2 (lib/ash/type/decimal.ex) without checking that the resulting value is finite. Elixir's Decimal represents Infinity and NaN as valid structs, so a value such as "Infinity" or "NaN" passed casting and was persisted. Because NaN compares as false against every bound, min and max constraints do not reject it, and the stored special value later raises when used in Decimal arithmetic or is refused by the data layer, failing subsequent requests. The fix rejects any non-finite Decimal during casting.
This issue affects ash: from 1.28.0 before 3.32.2. |
| iFlytek astron-agent through 1.1.1 contains an authorization bypass vulnerability in the copyFlow endpoint that fails to validate workflow ownership. Authenticated attackers can enumerate workflow identifiers and overwrite other tenants' workflows or copy private workflows to read their definitions. |
| Rodauth before 2.47.0 contains an authentication bypass vulnerability in the jwt_refresh route that issues new JWT access tokens without requiring a refresh token. Attackers can present an access token to the refresh route via non-POST methods to obtain a new valid access token, enabling indefinite account access with temporary token possession. |
| pac4j-core before 6.5.6 contains an open redirect vulnerability in DefaultLogoutLogic.perform() that accepts backslash-prefixed logout redirect targets matching logoutUrlPattern. Attackers can craft logout links with backslash-prefixed external hosts that browsers normalize into network-path references, redirecting victims to attacker-controlled sites after logout. |
| su-exec through 0.3 fails to validate numeric user and group identifiers parsed with strtol before assigning to uid_t and gid_t, allowing truncation of out-of-range values to zero. Attackers can supply large numeric identifiers that truncate to root's identifier, causing su-exec to execute target programs with root privileges instead of intended unprivileged accounts. |
| rust-iot-platform through commit 5df942ab contains an authentication bypass vulnerability where most REST API routes lack authentication guards in their handler signatures. Unauthenticated attackers can create, update, list, retrieve, and delete user accounts by directly accessing unprotected endpoints without providing valid credentials. |
| A vulnerability has been found in macrozheng mall up to 1.0.3. The affected element is an unknown function of the file /order/paySuccess of the component Payment Status Endpoint. The manipulation of the argument orderId leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The vendor deleted the GitHub issue for this vulnerability without any explanation. |
| The Custom User Registration Fields for WooCommerce plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 2.2.3. This is due to the plugin accepting an attacker-controlled afreg_select_user_role value from the unauthenticated WooCommerce Store API /wc/store/v1/checkout request in the af_reg_checkout_data_to_order_meta_data_block() function, persisting it in order meta, and then passing it directly to WP_User::add_role() in the af_reg_custom_order_processing_function() function (hooked to woocommerce_thankyou) without validating against the plugin's admin-configured allowed role list. This makes it possible for unauthenticated attackers to elevate their privileges to Administrator by creating an account during checkout with a modified JSON body specifying administrator (or any other role slug) as the desired role. Note: The exploit requires the "User Role Selection" setting to be enabled. |
