| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| Hono before 4.11.10 contains a timing attack vulnerability in the basicAuth and bearerAuth middlewares due to non-constant-time string comparison in the timingSafeEqual function. Attackers can exploit early termination of string equality checks to infer valid credentials through precise timing measurements. |
| HCL BigFix Platform is affected by a user enumeration vulnerability which might allow an attacker, through careful system control and response time monitoring, to perform some level of user enumeration for the BigFix service. |
| Phalcon is a high-performance, full-stack PHP framework. Prior to 5.14.1, Phalcon\Encryption\Crypt::decrypt compares the attacker-supplied HMAC tag against the freshly computed HMAC using PHP/Zephir identity comparison, which lowers to a byte-wise comparison that returns early on the first differing byte. This observable timing discrepancy can allow an attacker to recover a valid tag byte-by-byte and attach it to a chosen IV and ciphertext so that decrypt() accepts tampered encrypted content as authentic. This issue is fixed in version 5.14.1. |
| A flaw was found in 389 Directory Server. The PBKDF2-SHA256 password verification function uses standard memcmp() for comparing password hashes instead of a constant-time comparison function. A remote attacker could potentially use timing measurements of LDAP bind attempts to infer partial hash information, though practical exploitation is extremely difficult due to PBKDF2 computational overhead. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. Prior to 0.10.0, the /api/v1/auths/signin endpoint looked users up by email and only ran bcrypt password verification when a credential existed, making registered-account attempts measurably slower than missing-email attempts and allowing unauthenticated account enumeration. This issue is fixed in version 0.10.0. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.5.0 and prior to version 4.11.0, the RSA-OAEP decryption implementation in the Hisilicon HPRE crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Manger-style padding oracle that allows an attacker to recover RSA-OAEP plaintext with approximately 1000-2000 adaptive chosen ciphertext queries. Only affects plat-d06 with `CFG_HISILICON_ACC_V3=y`, which seems to be disabled by default. Version 4.11.0 contains a patch. As a workaround, disable Hisilicon HPRE RSA driver with `CFG_HISILICON_ACC_V3=n`. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.9.0 and prior to version 4.11.0, the RSA-OAEP decryption implementation in the NXP CAAM crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Manger-style padding oracle that allows an attacker to recover RSA-OAEP plaintext with approximately 1000-2000 adaptive chosen ciphertext queries. Version 4.11.0 contains a patch. As a workaround, disable the NXP CAAM RSA driver with `CFG_CRYPTO_DRV_RSA=n`. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.5.0 and prior to version 4.11.0, the RSA PKCS#1 v1.5 decryption implementation in the Hisilicon HPRE crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Bleichenbacher-style padding oracle that allows an attacker to recover RSA PKCS#1 v1.5 plaintext. Version 4.11.0 contains a patch. As a workaround, disable Hisilicon HPRE RSA driver with `CFG_HISILICON_ACC_V3=n`. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.461, the GitLab webhook endpoint uses a non-constant-time string comparison operator (!==) to validate the webhook secret token. This implementation is vulnerable to timing attacks, which could allow an attacker to gradually discover the secret token by measuring response time differences. This vulnerability is fixed in 4.0.0-beta.461. |
| CryptX versions before 0.088_001 for Perl compare AEAD authentication tags in non-constant time in the streaming decrypt_done path.
The decrypt_done($tag) form compares it against the computed tag with memNE (memcmp() != 0), which short-circuits on the first differing byte, so its run time depends on the number of matching leading bytes. This affects all five AEAD modes: GCM, CCM, ChaCha20Poly1305, EAX and OCB. The one-shot *_decrypt_verify helpers are unaffected; they verify the tag inside libtomcrypt with a constant-time comparison.
The timing difference is a tag-verification oracle. An attacker who can submit many candidate tags for the same nonce, ciphertext and associated data while measuring the timing precisely enough may recover the expected tag byte by byte and forge a message that verifies. |
| An observable timing discrepancy in the ASP could allow a privileged attacker to perform a brute-force attack against the hash message authentication code, allowing arbitrary message input, potentially leading to a loss of data integrity. |
| An observable timing discrepancy in the ASP could allow a privileged attacker to perform a brute-force attack against the hash message authentication code, allowing the input of an arbitrary message, potentially leading to a loss of data integrity. |
| Bleichenbacher padding oracle in PKCS#7 KTRI decryption. When decrypting PKCS#7 EnvelopedData using RSA PKCS#1 v1.5 key transport, wolfSSL returned distinguishable error codes depending on whether RSA padding validation failed versus whether the decrypted content was malformed. An attacker able to submit crafted EnvelopedData messages and observe error responses could use this as a padding oracle to incrementally recover the encrypted Content Encryption Key (CEK). The fix generates a deterministic pseudo-random fake CEK on padding failure (via HMAC-SHA256) and proceeds with decryption identically, using constant-time operations throughout, so that all failure paths produce the same error regardless of padding validity. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, sign-in response timing differed between known and unknown email addresses because the unknown-user branch returned without performing a password hash comparison. This vulnerability is fixed in 2026.04.1. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.11.5 and 5.6.5, the login page has an observable timing discrepancy that allows unauthenticated attackers to enumerate registered email addresses. The impact is limited to disclosing whether an account exists for a given email. This vulnerability is fixed in 4.11.5 and 5.6.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-md5: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| Linux-PAM through 1.7.2 contains an observable timing discrepancy (CWE-208) in the pam_userdb module's plaintext-password comparison path in modules/pam_userdb/pam_userdb.c that allows a local or network-adjacent attacker able to repeatedly drive authentication through a calling service to recover the plaintext password of a target account by measuring response-timing differences. The comparison uses strncmp() (or strncasecmp() when PAM_ICASE_ARG is set) preceded by a length-equality check, so the time to reject a candidate depends on the index of the first differing byte and on whether the candidate's length matches the stored password, leaking the password length and individual prefix bytes. The vulnerable path is reached when the administrator configures pam_userdb with crypt=none, with an unrecognized crypt method, or without a crypt= argument, causing the module to store and compare credentials in plaintext. |
| Observable Timing Discrepancy vulnerability in Erlang/OTP ssh (ssh_auth, ssh_options modules) allows unauthenticated remote username enumeration via timing side-channel in password authentication.
When the SSH daemon is configured with the user_passwords or password option, ssh_auth:check_password/3 performs a PBKDF2-SHA256 computation with 600,000 iterations (~300ms) for valid usernames, but returns immediately (~0ms) for invalid usernames via the ssh_options:get_password_option/2 path. This timing difference is detectable in a single authentication attempt and allows an unauthenticated attacker to distinguish valid from invalid usernames.
The user_passwords and password options are documented as intended for test purposes; the recommended alternative is pwdfun, which is not affected by this vulnerability.
This vulnerability is associated with program files lib/ssh/src/ssh_auth.erl and lib/ssh/src/ssh_options.erl.
This issue affects OTP from OTP 29.0 before 29.0.2 corresponding to ssh from 6.0 before 6.0.1. |
