| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid early lgr access in smc_clc_wait_msg
A CLC decline can be received while the handshake is still in an early
stage, before the connection has been associated with a link group.
The decline handling in smc_clc_wait_msg() updates link-group level sync
state for first-contact declines, but that state only exists after link
group setup has completed. Guard the link-group update accordingly and
keep the per-socket peer diagnosis handling unchanged.
This preserves the existing sync_err handling for established link-group
contexts and avoids touching link-group state before it is available. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup
Disable the delayed work before clearing BAR mappings and doorbells to
avoid running the handler after resources have been torn down.
Unable to handle kernel paging request at virtual address ffff800083f46004
[...]
Internal error: Oops: 0000000096000007 [#1] SMP
[...]
Call trace:
epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P)
process_one_work+0x154/0x3b0
worker_thread+0x2c8/0x400
kthread+0x148/0x210
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: blk-cgroup: fix use-after-free in cgwb_release_workfn()
cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses
wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last
reference, the blkcg can be freed asynchronously (css_free_rwork_fn ->
blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the
pointer to access blkcg->online_pin, resulting in a use-after-free:
BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
cgwb_release_workfn (mm/backing-dev.c:629)
process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385)
Freed by task 1016:
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5542)
process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385)
** Stack based on commit 66672af7a095 ("Add linux-next specific files
for 20260410")
I am seeing this crash sporadically in Meta fleet across multiple kernel
versions. A full reproducer is available at:
https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh
(The race window is narrow. To make it easily reproducible, inject a
msleep(100) between css_put() and blkcg_unpin_online() in
cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the
reproducer triggers the splat reliably in less than a second.)
Fix this by moving blkcg_unpin_online() before css_put(), so the
cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online()
accesses it. |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually] |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop tp_meter sessions during mesh teardown
TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.
A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event()
Sashiko points out the radix_tree itself is RCU safe, but nothing ever
frees the mlx4_srq struct with RCU, and it isn't even accessed within the
RCU critical section. It also will crash if an event is delivered before
the srq object is finished initializing.
Use the spinlock since it isn't easy to make RCU work, use
refcount_inc_not_zero() to protect against partially initialized objects,
and order the refcount_set() to be after the srq is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix race condition during PASID entry replacement
The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing
an active PASID entry (e.g., during domain replacement), the current
implementation calculates a new entry on the stack and copies it to the
table using a single structure assignment.
struct pasid_entry *pte, new_pte;
pte = intel_pasid_get_entry(dev, pasid);
pasid_pte_config_first_level(iommu, &new_pte, ...);
*pte = new_pte;
Because the hardware may fetch the 512-bit PASID entry in multiple
128-bit chunks, updating the entire entry while it is active (Present
bit set) risks a "torn" read. In this scenario, the IOMMU hardware
could observe an inconsistent state — partially new data and partially
old data — leading to unpredictable behavior or spurious faults.
Fix this by removing the unsafe "replace" helpers and following the
"clear-then-update" flow, which ensures the Present bit is cleared and
the required invalidation handshake is completed before the new
configuration is applied. |
| Race in WebRTC in Google Chrome on Windows prior to 148.0.7778.216 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: fix damon_call() vs kdamond_fn() exit race
Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit
race".
damon_call() and damos_walk() can leak memory and/or deadlock when they
race with kdamond terminations. Fix those.
This patch (of 2);
When kdamond_fn() main loop is finished, the function cancels all
remaining damon_call() requests and unset the damon_ctx->kdamond so that
API callers and API functions themselves can know the context is
terminated. damon_call() adds the caller's request to the queue first.
After that, it shows if the kdamond of the damon_ctx is still running
(damon_ctx->kdamond is set). Only if the kdamond is running, damon_call()
starts waiting for the kdamond's handling of the newly added request.
The damon_call() requests registration and damon_ctx->kdamond unset are
protected by different mutexes, though. Hence, damon_call() could race
with damon_ctx->kdamond unset, and result in deadlocks.
For example, let's suppose kdamond successfully finished the damon_call()
requests cancelling. Right after that, damon_call() is called for the
context. It registers the new request, and shows the context is still
running, because damon_ctx->kdamond unset is not yet done. Hence the
damon_call() caller starts waiting for the handling of the request.
However, the kdamond is already on the termination steps, so it never
handles the new request. As a result, the damon_call() caller threads
infinitely waits.
Fix this by introducing another damon_ctx field, namely
call_controls_obsolete. It is protected by the
damon_ctx->call_controls_lock, which protects damon_call() requests
registration. Initialize (unset) it in kdamond_fn() before letting
damon_start() returns and set it just before the cancelling of remaining
damon_call() requests is executed. damon_call() reads the obsolete field
under the lock and avoids adding a new request.
After this change, only requests that are guaranteed to be handled or
cancelled are registered. Hence the after-registration DAMON context
termination check is no longer needed. Remove it together.
Note that the deadlock will not happen when damon_call() is called for
repeat mode request. In tis case, damon_call() returns instead of waiting
for the handling when the request registration succeeds and it shows the
kdamond is running. However, if the request also has dealloc_on_cancel,
the request memory would be leaked.
The issue is found by sashiko [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: ensure ctx->rings is stable for task work flags manipulation
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel
the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op,
POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can
still be running while ufshcd_vops_suspend() is executing. When
UFSHCD_CAP_CLK_GATING is not supported, the condition
!hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc()
to be executed. Since ufshcd_vops_suspend() typically performs clock
gating operations, executing ufshcd_update_rtc() at that moment triggers
an SError. The kernel panic trace is as follows:
Kernel panic - not syncing: Asynchronous SError Interrupt
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
panic+0x148/0x374
nmi_panic+0x3c/0x8c
arm64_serror_panic+0x64/0x8c
do_serror+0xc4/0xc8
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x68/0x6c
el1_interrupt+0x20/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
ktime_get+0xc4/0x12c
ufshcd_mcq_sq_stop+0x4c/0xec
ufshcd_mcq_sq_cleanup+0x64/0x1dc
ufshcd_clear_cmd+0x38/0x134
ufshcd_issue_dev_cmd+0x298/0x4d0
ufshcd_exec_dev_cmd+0x1a4/0x1c4
ufshcd_query_attr+0xbc/0x19c
ufshcd_rtc_work+0x10c/0x1c8
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x120/0x1d8
ret_from_fork+0x10/0x20
Fix this by moving cancel_delayed_work_sync() before the call to
ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is
fully completed or cancelled at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: image: mdc800: kill download URB on timeout
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c93131998 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c505 ("media: rc: iguanair: handle timeouts") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: class: cdc-wdm: fix reordering issue in read code path
Quoting the bug report:
Due to compiler optimization or CPU out-of-order execution, the
desc->length update can be reordered before the memmove. If this
happens, wdm_read() can see the new length and call copy_to_user() on
uninitialized memory. This also violates LKMM data race rules [1].
Fix it by using WRITE_ONCE and memory barriers. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Avoid bitfield RMW for claim/retune flags
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
MHI stack offers the 'auto_queue' feature, which allows the MHI stack to
auto queue the buffers for the RX path (DL channel). Though this feature
simplifies the client driver design, it introduces race between the client
drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'
for the DL channel may get called before the client driver is fully probed.
This means, by the time the dl_callback gets called, the client driver's
structures might not be initialized, leading to NULL ptr dereference.
Currently, the drivers have to workaround this issue by initializing the
internal structures before calling mhi_prepare_for_transfer_autoqueue().
But even so, there is a chance that the client driver's internal code path
may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is
called, leading to similar NULL ptr dereference. This issue has been
reported on the Qcom X1E80100 CRD machines affecting boot.
So to properly fix all these races, drop the MHI 'auto_queue' feature
altogether and let the client driver (QRTR) manage the RX buffers manually.
In the QRTR driver, queue the RX buffers based on the ring length during
probe and recycle the buffers in 'dl_callback' once they are consumed. This
also warrants removing the setting of 'auto_queue' flag from controller
drivers.
Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.
So only the QRTR client driver requires the modification. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix user_ref race between scrub and refill paths
The io_zcrx_put_niov_uref() function uses a non-atomic
check-then-decrement pattern (atomic_read followed by separate
atomic_dec) to manipulate user_refs. This is serialized against other
callers by rq_lock, but io_zcrx_scrub() modifies the same counter with
atomic_xchg() WITHOUT holding rq_lock.
On SMP systems, the following race exists:
CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock)
put_niov_uref:
atomic_read(uref) - 1
// window opens
atomic_xchg(uref, 0) - 1
return_niov_freelist(niov) [PUSH #1]
// window closes
atomic_dec(uref) - wraps to -1
returns true
return_niov(niov)
return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE]
The same niov is pushed to the freelist twice, causing free_count to
exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds
write (a u32 value) past the kvmalloc'd freelist array into the adjacent
slab object.
Fix this by replacing the non-atomic read-then-dec in
io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically
tests and decrements user_refs. This makes the operation safe against
concurrent atomic_xchg from scrub without requiring scrub to acquire
rq_lock.
[pavel: removed a warning and a comment] |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: prio: fix a race in prio_tune()
Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock. |
