{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-64074", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2026-07-19T07:54:57.031Z", "datePublished": "2026-07-19T15:39:49.076Z", "dateUpdated": "2026-08-05T12:38:55.440Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-08-05T12:38:55.440Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nfs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap\n\nstatmount_mnt_idmap() writes one mapping with seq_printf() and then\nmanually advances seq->count to include the NUL separator.\n\nIf seq_printf() overflows, seq_set_overflow() sets seq->count to\nseq->size. The manual seq->count++ changes this to seq->size + 1.\nseq_has_overflowed() then no longer detects the overflow. The corrupted\ncount returns to statmount_string(), which later executes:\n\n seq->buf[seq->count++] = '\\0';\n\nThis causes a 1-byte NULL out-of-bounds write on the dynamically\nallocated seq buffer.\n\nFix this by checking for overflow immediately after seq_printf()."}], "metrics": [{"cvssV3_1": {"version": "3.1", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "baseScore": 7.8, "baseSeverity": "HIGH"}, "scenarios": [{"lang": "en", "value": "AV:L - The bug is reachable only through the statmount(2) syscall when requesting mount UID/GID map strings; there is no network, adjacent, or physical entry path to this code.\nAC:L - An attacker fully controls statmount mask, buffer sizing, mount paths/options, and idmap extent values to reliably drive seq_printf() to overflow at the vulnerable count++ site without depending on uncontrollable timing or layout.\nPR:L - Exploitation requires creating or querying an idmapped mount via statmount, which an unprivileged local user can do in their own user/mount namespaces where CAP_SYS_ADMIN is granted by user namespaces.\nUI:N - Triggering the flaw requires only the attacker's own statmount syscall and crafted namespace/mount setup; no action by another user or victim is needed.\nS:U - Impact is kernel heap corruption and potential privilege escalation within the same kernel security domain, not a cross-boundary escape such as VM guest-to-host.\nC:H - The flaw is a slab out-of-bounds write that corrupts adjacent heap memory; per kernel CVSS guidance, exploitable memory corruption warrants High confidentiality impact even if direct read is not guaranteed.\nI:H - A one-byte out-of-bounds NULL write into adjacent kmalloc slab objects can corrupt kernel metadata and be leveraged for arbitrary memory modification or code execution.\nA:H - Heap corruption from the out-of-bounds write can cause kernel oops/panic or destabilize the system, and memory-corruption bugs are scored as High availability impact."}]}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["fs/mnt_idmapping.c"], "versions": [{"version": "37c4a9590e1efcae7749682239fc22a330d2d325", "lessThan": "e37ea2c6f17f273813ea4e8e94c102591d598ce1", "status": "affected", "versionType": "git"}, {"version": "37c4a9590e1efcae7749682239fc22a330d2d325", "lessThan": "93614949dc86f068e3c32c32cf1ee2a2323177a7", "status": "affected", "versionType": "git"}, {"version": "37c4a9590e1efcae7749682239fc22a330d2d325", "lessThan": "a3bf0f28d4ba16e1f35f8c983bb04426b87e2a78", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["fs/mnt_idmapping.c"], "versions": [{"version": "6.15", "status": "affected"}, {"version": "0", "lessThan": "6.15", "status": "unaffected", "versionType": "semver"}, {"version": "6.18.34", "lessThanOrEqual": "6.18.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.0.11", "lessThanOrEqual": "7.0.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.1", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.15", "versionEndExcluding": "6.18.34"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.15", "versionEndExcluding": "7.0.11"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.15", "versionEndExcluding": "7.1"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/e37ea2c6f17f273813ea4e8e94c102591d598ce1"}, {"url": "https://git.kernel.org/stable/c/93614949dc86f068e3c32c32cf1ee2a2323177a7"}, {"url": "https://git.kernel.org/stable/c/a3bf0f28d4ba16e1f35f8c983bb04426b87e2a78"}], "title": "fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"affected": [{"affectedData": [{"defaultStatus": "unaffected", "product": "Linux", "programFiles": ["fs/mnt_idmapping.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"lessThan": "e37ea2c6f17f273813ea4e8e94c102591d598ce1", "status": "affected", "version": "37c4a9590e1efcae7749682239fc22a330d2d325", "versionType": "git"}, {"lessThan": "93614949dc86f068e3c32c32cf1ee2a2323177a7", "status": "affected", "version": "37c4a9590e1efcae7749682239fc22a330d2d325", "versionType": "git"}, {"lessThan": "a3bf0f28d4ba16e1f35f8c983bb04426b87e2a78", "status": "affected", "version": "37c4a9590e1efcae7749682239fc22a330d2d325", "versionType": "git"}]}, {"defaultStatus": "affected", "product": "Linux", "programFiles": ["fs/mnt_idmapping.c"], "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "versions": [{"status": "affected", "version": "6.15"}, {"lessThan": "6.15", "status": "unaffected", "version": "0", "versionType": "semver"}, {"lessThanOrEqual": "6.18.*", "status": "unaffected", "version": "6.18.34", "versionType": "semver"}, {"lessThanOrEqual": "7.0.*", "status": "unaffected", "version": "7.0.11", "versionType": "semver"}, {"lessThanOrEqual": "*", "status": "unaffected", "version": "7.1", "versionType": "original_commit_for_fix"}]}], "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"}], "configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "89E9B97C-FD82-4D2E-8426-3A1A703B2ED7", "versionEndExcluding": "6.18.34", "versionStartIncluding": "6.15", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "0520D091-FC52-4A50-AF07-70AE7D08B750", "versionEndExcluding": "7.0.11", "versionStartIncluding": "6.19", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*", "matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc2:*:*:*:*:*:*", "matchCriteriaId": "0D38F0BF-A728-4133-A358-D44A2F7EE6D6", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc3:*:*:*:*:*:*", "matchCriteriaId": "EC732D08-5F7B-46D9-B154-E60C7F4F0A97", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc4:*:*:*:*:*:*", "matchCriteriaId": "E5910A9D-F60A-409A-B486-FE66BFEBA9B9", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nfs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap\n\nstatmount_mnt_idmap() writes one mapping with seq_printf() and then\nmanually advances seq->count to include the NUL separator.\n\nIf seq_printf() overflows, seq_set_overflow() sets seq->count to\nseq->size. The manual seq->count++ changes this to seq->size + 1.\nseq_has_overflowed() then no longer detects the overflow. The corrupted\ncount returns to statmount_string(), which later executes:\n\n seq->buf[seq->count++] = '\\0';\n\nThis causes a 1-byte NULL out-of-bounds write on the dynamically\nallocated seq buffer.\n\nFix this by checking for overflow immediately after seq_printf()."}], "id": "CVE-2026-64074", "lastModified": "2026-09-03T14:47:02.987", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "type": "Secondary"}]}, "published": "2026-07-19T16:17:48.010", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/93614949dc86f068e3c32c32cf1ee2a2323177a7"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/a3bf0f28d4ba16e1f35f8c983bb04426b87e2a78"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/e37ea2c6f17f273813ea4e8e94c102591d598ce1"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-787"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap", "id": "2502475", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2502475"}, "csaw": false, "cwe": "CWE-787", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nfs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap\nstatmount_mnt_idmap() writes one mapping with seq_printf() and then\nmanually advances seq->count to include the NUL separator.\nIf seq_printf() overflows, seq_set_overflow() sets seq->count to\nseq->size. The manual seq->count++ changes this to seq->size + 1.\nseq_has_overflowed() then no longer detects the overflow. The corrupted\ncount returns to statmount_string(), which later executes:\nseq->buf[seq->count++] = '\\0';\nThis causes a 1-byte NULL out-of-bounds write on the dynamically\nallocated seq buffer.\nFix this by checking for overflow immediately after seq_printf().", "A flaw was found in the Linux kernel. This vulnerability, located in the `statmount_mnt_idmap` function, involves an out-of-bounds write. When processing mount ID mappings, an internal buffer can be incorrectly accessed due to an unchecked overflow, leading to a single-byte overwrite. This memory corruption can cause system instability or a denial of service."], "name": "CVE-2026-64074", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2026-07-19T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2026-64074\nhttps://nvd.nist.gov/vuln/detail/CVE-2026-64074\nhttps://lore.kernel.org/linux-cve-announce/2026071913-CVE-2026-64074-06ce@gregkh/T"]}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[37c4a9590e1efcae7749682239fc22a330d2d325,e37ea2c6f17f273813ea4e8e94c102591d598ce1)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[37c4a9590e1efcae7749682239fc22a330d2d325,93614949dc86f068e3c32c32cf1ee2a2323177a7)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[37c4a9590e1efcae7749682239fc22a330d2d325,a3bf0f28d4ba16e1f35f8c983bb04426b87e2a78)"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}, {"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "generic", "value": "6.15"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[0,6.15)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[6.18.34,6.19.0]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[7.0.11,7.1.0]"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.1,*]"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}], "created": "2026-07-21T22:15:03.078335+00:00", "updated": "2026-08-04T06:15:04.060787+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}