In the Linux kernel, the following vulnerability has been resolved:
btrfs: initialize inode mapping flags for cached inodes
[BUG]
When running generic/795 with 8K block size, 4K page size, the test
always fails, triggering some ASSERT()s related to folio size:
795 (241074): drop_caches: 3
assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0)
------------[ cut here ]------------
kernel BUG at extent_io.c:1404!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs]
Call Trace:
<TASK>
btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
iter_file_splice_write+0x31a/0x540
direct_splice_actor+0x53/0x170
splice_direct_to_actor+0xe9/0x240
do_splice_direct+0x76/0xb0
vfs_copy_file_range+0x1fd/0x630
__x64_sys_copy_file_range+0xf9/0x220
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The ASSERT() itself is added by a later patch.
The crash is triggered with that new debug patch, and without this fix.
[CAUSE]
In the above case, the start 16826368 is properly 8K aligned, but the
end (16830463 + 1) is not 8K aligned.
Furthermore the mapping's minimal folio order is 0, not the expected 1
for 8K block size with 4K page size.
So this means some inodes do not have btrfs_set_inode_mapping_order()
called on it.
The missing btrfs_set_inode_mapping_order() call happens for cached
inodes, through the following events:
- btrfs_create_new_inode() called for inode X
Which properly sets minimal folio order for the VFS inode.
- btrfs_update_inode() called for inode X
Which calls btrfs_delayed_update_inode() to create a delayed_node
into root->delayed_nodes xarray.
- Drop cache/memory pressure, evicting in-memory inode X
Which evicted the inode X, but delayed_node is still in
root->delayed_nodes for future reuse.
- btrfs_iget() for inode X called again
btrfs_iget()
|- btrfs_iget_locked()
| |- iget5_locked_rcu()
| Which creates a new vfs_inode for btrfs, whose mapping still
| has the minimal order as 0.
|
|- btrfs_read_locked_inode()
|- btrfs_fill_inode()
| |- btrfs_get_delayed_node()
| Which found out the previous node, and use that delayed
| node to initialize the new inode.
|
|- filled = true;
|- if (filled) goto cache_index;
Which skips the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls.
So the inode still has minimal folio order set as 0, not
the required 1.
Thus later page cache read will get a folio whose size is smaller than
block size, as the mapping has its minimal folio order set as 0 not 1,
then trigger the ASSERT().
[FIX]
Move the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls under cache_index label,
so that the mapping flags and minimal folio order is always set
no matter if we have a cached inode.
btrfs: initialize inode mapping flags for cached inodes
[BUG]
When running generic/795 with 8K block size, 4K page size, the test
always fails, triggering some ASSERT()s related to folio size:
795 (241074): drop_caches: 3
assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0)
------------[ cut here ]------------
kernel BUG at extent_io.c:1404!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs]
Call Trace:
<TASK>
btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
iter_file_splice_write+0x31a/0x540
direct_splice_actor+0x53/0x170
splice_direct_to_actor+0xe9/0x240
do_splice_direct+0x76/0xb0
vfs_copy_file_range+0x1fd/0x630
__x64_sys_copy_file_range+0xf9/0x220
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The ASSERT() itself is added by a later patch.
The crash is triggered with that new debug patch, and without this fix.
[CAUSE]
In the above case, the start 16826368 is properly 8K aligned, but the
end (16830463 + 1) is not 8K aligned.
Furthermore the mapping's minimal folio order is 0, not the expected 1
for 8K block size with 4K page size.
So this means some inodes do not have btrfs_set_inode_mapping_order()
called on it.
The missing btrfs_set_inode_mapping_order() call happens for cached
inodes, through the following events:
- btrfs_create_new_inode() called for inode X
Which properly sets minimal folio order for the VFS inode.
- btrfs_update_inode() called for inode X
Which calls btrfs_delayed_update_inode() to create a delayed_node
into root->delayed_nodes xarray.
- Drop cache/memory pressure, evicting in-memory inode X
Which evicted the inode X, but delayed_node is still in
root->delayed_nodes for future reuse.
- btrfs_iget() for inode X called again
btrfs_iget()
|- btrfs_iget_locked()
| |- iget5_locked_rcu()
| Which creates a new vfs_inode for btrfs, whose mapping still
| has the minimal order as 0.
|
|- btrfs_read_locked_inode()
|- btrfs_fill_inode()
| |- btrfs_get_delayed_node()
| Which found out the previous node, and use that delayed
| node to initialize the new inode.
|
|- filled = true;
|- if (filled) goto cache_index;
Which skips the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls.
So the inode still has minimal folio order set as 0, not
the required 1.
Thus later page cache read will get a folio whose size is smaller than
block size, as the mapping has its minimal folio order set as 0 not 1,
then trigger the ASSERT().
[FIX]
Move the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls under cache_index label,
so that the mapping flags and minimal folio order is always set
no matter if we have a cached inode.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Thu, 03 Sep 2026 13:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-665 |
Thu, 03 Sep 2026 07:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | |
| Title | btrfs: initialize inode mapping flags for cached inodes | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-03T08:21:50.734Z
Reserved: 2026-08-26T14:34:25.789Z
Link: CVE-2026-80734
No data.
Status : Received
Published: 2026-09-03T13:06:12.200
Modified: 2026-09-03T13:06:12.200
Link: CVE-2026-80734
No data.
OpenCVE Enrichment
Updated: 2026-09-03T13:15:04Z
Weaknesses