Export limit exceeded: 367922 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (367922 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64189 | 1 Linux | 1 Linux Kernel | 2026-07-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-64188 | 1 Linux | 1 Linux Kernel | 2026-07-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers. | ||||
| CVE-2026-64187 | 1 Linux | 1 Linux Kernel | 2026-07-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) | ||||
| CVE-2026-48819 | 2026-07-20 | 4.8 Medium | ||
| Hey API is an ecosystem for turning API specifications into production-ready code. Prior to 0.97.3, dist/clients/core/params.ts ships a runtime template copied into generated SDKs as params.gen.ts, and buildClientParams writes unknown slot-prefixed keys such as $body_, $headers_, $path_, and $query_ directly to the corresponding slot, allowing $query___proto__ alongside a legitimate q field to set params.query through params["query"]["__proto__"] = value, call Object.setPrototypeOf(params.query, value), and expose inherited attacker-controlled keys during for..in iteration. This issue is fixed in version 0.97.3. | ||||
| CVE-2026-50289 | 1 Sebhildebrandt | 1 Systeminformation | 2026-07-20 | N/A |
| systeminformation is a System and OS information library for node.js. Prior to 5.31.7, networkInterfaces() on Linux is vulnerable to OS command injection through the Debian/Ubuntu interfaces(5) source directive because lib/network.js checkLinuxDCHPInterfaces() reads /etc/network/interfaces, extracts a source <path> token from file content, and interpolates it unquoted into cat ${file} 2> /dev/null | grep 'iface\|source' executed by execSync(cmd, util.execOptsLinux), allowing a path containing shell metacharacters to execute commands in any process that calls networkInterfaces(), including via getStaticData() and getAllData(). This issue is fixed in version 5.31.7. | ||||
| CVE-2026-16312 | 2026-07-20 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-63428 | 2026-07-20 | 5.8 Medium | ||
| HeyForm is an open-source form builder. Prior to version 3.0.0-rc.9, `completeSubmission` accepts a `hiddenFields: [{id, name, value}]` array from the submitter and stores it verbatim in `submission.hiddenFields`, without validating the supplied `id`/`name` against the form's declared `form.hiddenFields` schema. An anonymous form submitter can therefore inject arbitrary key/value pairs (including XSS payloads, fake authorization metadata, integration-relevant values) into the stored submission. These fields are subsequently forwarded as-is to every webhook integration registered on the form. Version 3.0.0-rc.9 contains a patch for the issue. | ||||
| CVE-2026-42770 | 1 Openssl | 1 Openssl | 2026-07-20 | 3.7 Low |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the peer key is not properly checked for the subgroup membership. Impact summary: A malicious peer which presents an X9.42 key carrying the victim's p and g parameters, a forged q = r (a small prime factor of the cofactor (p−1)/q_local), and a public value Y of order r can recover the victim's private key after a small number of key exchange attempts. When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's own q parameter, not the local key's q. The peer's domain parameters are then matched against the domain parameters of the private key, but the value of q is not compared. A malicious peer who presents an X9.42 key carrying the victim's p, g, a forged q = r (a small prime factor of the cofactor), and a public value Y of order r passes all checks. The shared secret then takes only r distinct values, leaking priv mod r. Repeating for each small-prime factor of the cofactor and combining via CRT recovers the full private key (Lim–Lee / small-subgroup-confinement attack). The realistic attack surface is narrow: principally CMP deployments with long-lived RA/CA DHX keys and bespoke enterprise or government applications using X9.42 DHX static keys with interactive protocols and therefore this issue was assigned Low severity. The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this issue. | ||||
| CVE-2026-32820 | 2026-07-20 | 7.5 High | ||
| dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, the documentation and static markdown renderer accepts attacker-controlled path segments and only runs them through the Rails HTML sanitizer, which does not remove directory traversal sequences. An unauthenticated attacker can traverse out of the intended `docs` or `static` directories and render arbitrary `.md` files from the application root or engine root. This is patched in version 26.06.08. | ||||
| CVE-2026-63739 | 2026-07-20 | 7.7 High | ||
| SurrealDB before 3.1.5 contains an arbitrary file read vulnerability in the DEFINE ANALYZER mapper filter that allows database users with EDITOR or OWNER roles to read files accessible to the SurrealDB process. Attackers can specify arbitrary file paths in the mapper filter and retrieve file contents through query error messages when the SURREAL_FILE_ALLOWLIST is empty or not configured. | ||||
| CVE-2025-45868 | 2026-07-20 | 8.8 High | ||
| LogicalDOC Enterprise up to and for v9.1.1 is vulnerable to blind SQL injection in the ComparisonServlet component, allowing authenticated user to manipulate SQL queries via crafted input. | ||||
| CVE-2026-63745 | 2026-07-20 | 5.4 Medium | ||
| SurrealDB versions before 3.1.0 contain an authorization bypass vulnerability where authenticated users can spoof composite record-id field values by writing to editable body fields. Attackers can bypass permission rules that gate access on id components like tenant isolation by setting same-named body fields to spoofed values that permission checks incorrectly read instead of the immutable id key. | ||||
| CVE-2026-63751 | 2026-07-20 | 4.3 Medium | ||
| SurrealDB versions before 3.1.0 contain a field-level permission bypass vulnerability in JSON Patch operations that allows authenticated users to read protected fields. Attackers can use UPDATE PATCH with an empty from pointer in copy or move operations to duplicate all record fields, including those restricted by field-level SELECT permissions, into attacker-chosen destination fields. | ||||
| CVE-2026-63757 | 2026-07-20 | 8.8 High | ||
| SurrealDB versions before 3.1.0 contain a session hijacking vulnerability where the HTTP /rpc sessions method returns attached session UUIDs without authentication and accepts arbitrary session fields with no ownership verification. Unauthenticated attackers can enumerate session UUIDs and impersonate authenticated sessions to read, write, delete data and escalate privileges. | ||||
| CVE-2026-63763 | 2026-07-20 | N/A | ||
| SurrealDB before 2.5.0 and before 3.0.0-beta.3 contains a confused deputy privilege escalation vulnerability. Unprivileged users (e.g., those with the database editor role) can create or modify fields containing futures, functions, or closures. Because these are executed in the context of the invoking/querying user rather than their creator, an attacker can plant malicious logic that executes with a higher-privileged user's permissions when that user reads or writes the affected record. This can lead to full privilege escalation, including creation of a root owner and server takeover. | ||||
| CVE-2026-57956 | 1 Signoz | 1 Signoz | 2026-07-20 | 6.4 Medium |
| SigNoz before 0.133.0 contains a broken access control vulnerability that allows authenticated users to access other organizations' alert rules by supplying a target rule UUID, as the alert rule store predicates fail to filter by organization ID. Attackers can read, edit, and delete alert rules belonging to other organizations by exploiting the missing tenant isolation check, bypassing multi-tenant access controls. | ||||
| CVE-2026-57309 | 2026-07-20 | N/A | ||
| A Blind SQL injection vulnerability has been identified in Windu CMS. A remote unauthenticated attacker is able to inject SQL syntax into URL path in HTTP header resulting in Blind SQL Injection. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 4.1 but may also affect other versions. | ||||
| CVE-2026-57310 | 2026-07-20 | N/A | ||
| Windu CMS uses hashing algorithm based on MD5 and SHA1 with static salt to store user passwords. This allows an attacker who obtain password hash to decode user credentials. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 4.1 but may also affect other versions. | ||||
| CVE-2026-46428 | 2026-07-20 | N/A | ||
| lettre is a a mailer library for Rust. Starting in version 0.10.1 and prior to version 0.11.22, an inverted-boolean bug in lettre's `boring-tls` integration silently disables TLS hostname verification for callers using the default (strict) configuration. An on-path attacker presenting any chain-valid certificate for any domain can intercept SMTP submission, including PLAIN/LOGIN credentials and message contents, against any lettre user built with the `boring-tls` feature. Other TLS backends (`native-tls`, `rustls`) are unaffected. Version 0.11.22 patches the issue. | ||||
| CVE-2026-26197 | 2026-07-20 | N/A | ||
| HDF5 is a high-performance library and a file format specification that implements the HDF5 data model. If a file is corrupted such that an array datatype's size, the number of elements, and the element size are not in agreement it can trigger an out of bounds read. The array datatype stores the full size of the datatype (`dt->shared->size`) separately from the number of elements (`dt->shared->u.array.nelem`) and the element size (`dt->shared->parent->shared->size`). If any one of these are corrupted so that they don't align with the others (element size * nelem = full size), it can lead to an out of bounds read. Depending on what is corrupted, it can alter the type of out of bounds read triggered. The vulnerability is present only in files that have been maliciously altered, as its generally not possible to independently alter the full size of the datatype, the element count and the element size. As such, this is only present if a malicious actor is altering files, and won't appear in regular usage. | ||||