Export limit exceeded: 370453 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370453 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64512 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Suppress UBSAN warning caused by field misuse The definition of reg->access_width changes depending on the reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses access_width to indicate the PCC region, which can result in a UBSAN if the value is greater than 4. For example: UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9 shift exponent 32 is too large for 32-bit type 'int' CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy) Hardware name: To be filled by O.E.M. Call trace: ...(trimming) ubsan_epilogue+0x10/0x48 __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0 cpc_write+0x4d0/0x670 cppc_set_perf+0x18c/0x490 cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq] ... (trimming) Lets fix this by validating the region type, as well as whether access_width has a value. Then since we are returning bit_width directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting the size. | ||||
| CVE-2026-64510 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on driver removal, any subsequent ACPI MCE will lead to a use-after-free like in the previous case. To address the first issue mentioned above, make acpi_nfit_probe() call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and to address the other one, add a remove callback to the driver and make it call acpi_nfit_shutdown(). Also, since it is now possible to pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it may not have been initialized, add checks against NULL for acpi_desc and its nvdimm_bus field to that function and make acpi_nfit_unregister() clear the latter after unregistering the NVDIMM bus. | ||||
| CVE-2026-64509 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust: block: fix GenDisk cleanup paths GenDiskBuilder::build() still has fallible work after __blk_mq_alloc_disk(), but its error path only recovers the foreign queue data. That leaks the temporary gendisk and request_queue until later teardown. If the caller moved the last Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq state after the tag set is dropped. Fix the pre-registration failure path by dropping the temporary gendisk reference with put_disk() before recovering queue_data, so disk_release() can tear down the owned queue. Also pair GenDisk::drop() with put_disk() after del_gendisk(). Once a Rust GenDisk has been added with device_add_disk(), del_gendisk() only unregisters it; the final gendisk reference still has to be dropped to complete the release path. | ||||
| CVE-2026-64507 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Enable IBPB flush on BPF JIT allocation Enable hardening against JIT spraying when Spectre-v2 mitigations are in use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip enabling the IBPB flush if the BPF dispatcher is already using a retpoline sequence. This hardening applies only when BPF-JIT is in use. Guard the enabling under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. | ||||
| CVE-2026-64506 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: correct drop logic for malformed AMPDU frames The previous commit aims to fix issue caused by malformed AMPDU frames. But the drop logic fails to deal with the first AMPDU packet paired with certain range of sequence number, and leads to unexpected packet drop. It is more likely to encounter this failure when there are busy traffic during rekey process and could lead to disconnection from the AP. Fix this by adding a initial state judgement and only reset status during pairwise rekey. | ||||
| CVE-2026-64505 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check for header Add a length check for the rndis header in rndis_rm_hdr, to ensure that MessageType, MessageLength, DataOffset, and DataLength fields are present before they are accessed. | ||||
| CVE-2026-64503 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. | ||||
| CVE-2026-64500 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: lpc32xx: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in lpc32xx_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ lpc32xx_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). | ||||
| CVE-2026-64499 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix PM reference leak in buffer preenable ads1119_triggered_buffer_preenable() resumes the device with pm_runtime_resume_and_get() before starting a conversion. If i2c_smbus_write_byte() fails, the function returns the error directly and leaves the runtime PM usage counter elevated. The matching postdisable callback is not called when preenable fails, so the reference is leaked and the device may remain runtime-active indefinitely. Store the I2C transfer result in ret and drop the runtime PM reference on failure before returning the error. | ||||
| CVE-2026-64495 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: bmg160: bail out when bandwidth/filter is not in table bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry matching the bw_bits value read from the chip: for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) { if (bmg160_samp_freq_table[i].bw_bits == bw_bits) break; } *val = bmg160_samp_freq_table[i].filter; If no entry matches, i ends up equal to the array size and the next line reads one slot past the end. bmg160_set_filter() has the same shape, driven by 'val' instead of bw_bits. smatch flags both: drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 Return -EINVAL when no entry matches. The set_filter() path is reachable from userspace via the sysfs in_anglvel_filter_low_pass_3db_frequency interface, so userspace can trivially trigger the out-of-bounds read with a value that is not in bmg160_samp_freq_table[].filter. | ||||
| CVE-2026-64494 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: fix runtime PM leak on read error gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. | ||||
| CVE-2026-64490 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA. | ||||
| CVE-2026-64488 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. | ||||
| CVE-2026-64486 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: cmipci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_cmipci_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. | ||||
| CVE-2026-64485 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: compress: Fix task creation error unwind snd_compr_task_new() allocates the driver task before validating the returned DMA buffers and reserving file descriptors. When either of those later steps fails, the core frees its task wrapper and DMA-buffer references without calling the driver's task_free() callback. Any driver resources allocated by task_create() are therefore leaked. The dual-fd allocation path also jumps to cleanup without storing the negative get_unused_fd_flags() result in retval. Since retval still contains the successful task_create() return value, TASK_CREATE can incorrectly report success although the task was discarded. Preserve the fd allocation errors and call task_free() when failure occurs after a successful task_create() callback. | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64482 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64481 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown. | ||||
| CVE-2026-64477 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario. | ||||
| CVE-2026-64476 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper. | ||||