Export limit exceeded: 370465 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370465 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370465 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64032 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix a possible use-after-free when removing a bridge port When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: <IRQ> __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) </IRQ> | ||||
| CVE-2026-14184 | 2 Academylms, Wordpress | 2 Academy Lms, Wordpress | 2026-07-22 | 5.4 Medium |
| The Academy LMS WordPress plugin before 3.8.1 does not verify ownership of a user-supplied user identifier in several of its lesson AJAX handlers, allowing authenticated users with subscriber-level access to read and modify other users' lesson notes and mark other users' lesson content as completed. | ||||
| CVE-2025-51678 | 2026-07-22 | 7.5 High | ||
| An issue was discovered in RISC-V PicoRV32 commit 87c89a. A mismatch in the PCPI INSN and memory address can lead to unexpected behavior. | ||||
| CVE-2026-51082 | 2026-07-22 | 7.2 High | ||
| A race condition between the vncproxy and vncwebsocket API calls in Proxmox Virtual Environment (PVE) 9.x pve-manager before 9.1.9 and 8.x before 8.4.19; qemu-server 9.x before 9.1.7 and 8.x before 8.4.7; and pve-container before 6.1.3 (PVE 9.x) and before 5.3.4 (PVE 8.x) allows an attacker with privileges to call "vncproxy" to hijack a VNC session that is established in parallel by a different user for a different VM. | ||||
| CVE-2026-16108 | 1 Redhat | 4 Build Keycloak, Jboss Data Grid, Jbosseapxp and 1 more | 2026-07-22 | 4.3 Medium |
| A flaw was found in the default-groups REST endpoint and realm representation of Keycloak. This component is responsible for managing groups that are automatically assigned to new users within a realm. The issue allows a delegated administrator with realm-viewing permissions to see the names and identifiers of hidden default groups, even if they lack the specific permissions to view those groups. This can lead to the exposure of sensitive organizational structures or internal group names. | ||||
| CVE-2026-8505 | 1 Ibm | 1 Langflow Oss | 2026-07-22 | 9.8 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 has a vulnerability in Langflow's webhook authentication logic allows unauthenticated users to trigger the execution of any flow. The system incorrectly bypasses API key validation when the WEBHOOK_AUTH_ENABLE configuration is set to False (which is the default setting). This allows a remote attacker who knows a flow's UUID to execute it as if they were the owner, potentially leading to Remote Code Execution (RCE). | ||||
| CVE-2026-45784 | 2026-07-22 | 5.1 Medium | ||
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.50 until 0.10.80, CipherCtxRef::cipher_update_inplace in openssl/src/cipher_ctx.rs incorrectly sized output buffers when used with AES key-wrap-with-padding ciphers EVP_aes_{128,192,256}_wrap_pad. For a non-multiple-of-8 input, OpenSSL writes up to 7 bytes past the end of the caller's buffer or Vec, producing attacker-controllable heap corruption when the plaintext length is attacker-influenced. This issue is fixed in version 0.10.80. | ||||
| CVE-2026-56623 | 1 Apache | 1 Mina Sshd | 2026-07-22 | 7.1 High |
| Path traversal on Windows in Apache MINA SSHD component sshd-git. Apache MINA SSHD is a Java library for client-side and server-side SSH. A git server implemented with Apache MINA SSHD component sshd-git and running on Windows could allow an authenticated remote user access to git repositories outside of the configured server-side root directory. The path validation applied for CVE-2026-48827 in Apache MINA SSHD 2.18.0 and 3.0.0-M4 was partly ineffective for Servers running on Windows. Applications are affected if they use org.apache.sshd:sshd-git to implement a git server and run on Windows. Applications not using sshd-git or not running on Windows are not affected. Users are advised to upgrade affected applications to Apache MINA SSHD 2.19.0, which fixes the issue. The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M4 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git and run on Windows. Upgrade affected applications to 3.0.0-M5. | ||||
| CVE-2026-13439 | 2 Hassantafreshi, Wordpress | 2 Easy Form Builder By Whitestudio — Drag & Drop Form Builder, Wordpress | 2026-07-22 | 9.8 Critical |
| The Easy Form Builder by WhiteStudio plugin for WordPress is vulnerable to Unauthenticated Privilege Escalation to Administrator in versions up to, and including, 4.0.11 This is due to the password recovery flow using the publicly-visible session identifier ('sid') as the password reset token stored in wp_emsfb_temp_links, combined with a publicly-accessible nonce refresh endpoint (Emsfb/v1/nonce/refresh) that issues valid WordPress REST nonces to unauthenticated visitors. This makes it possible for unauthenticated attackers to reset the password of any WordPress user — including administrators — by scraping the public sid from a published login form page, submitting a recovery request for any known user email via Emsfb/v1/forms/message/add, and then calling Emsfb/v1/forms/recovery/efb_set_password with the known sid to set an arbitrary new password and gain full administrator access. | ||||
| CVE-2026-65049 | 3 Ninjaforms, Saturday Drive, Wordpress | 3 Ninja Forms, Ninja Forms, Wordpress | 2026-07-22 | 9.3 Critical |
| Ninja Forms plugin version 3.14.8 and prior for WordPress Multisite contains an incorrect authorization vulnerability that allows a subsite Administrator to trigger network-wide deletion of all Ninja Forms data by exploiting a site-scoped capability check combined with unsafe multisite migration defaults. Attackers can send a crafted POST request to the admin-ajax.php endpoint with the nf_delete_all_data action and a per-site nonce to invoke migration routines that unconditionally iterate all blogs via switch_to_blog(), dropping all nf3_* tables and clearing options and transients across every subsite in the network without requiring super-admin or network-admin privileges. | ||||
| CVE-2026-63979 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | ||||
| CVE-2026-64029 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize UMP output teardown with event_input seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-55833 | 1 Netty | 1 Netty | 2026-07-22 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to 4.1.136.Final and 4.2.16.Final, Netty SPDY header decoding continues inflating zlib-compressed header blocks after the raw header parser has exceeded `maxHeaderSize` and marked the frame truncated in `SpdyFrameCodec`, allowing a remote peer to send a small compressed `HEADERS` block that expands into much larger raw header data and causes compression-amplified CPU and allocation churn. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. | ||||
| CVE-2026-64609 | 1 Apache | 1 Fory | 2026-07-22 | 9.1 Critical |
| Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected. This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | ||||
| CVE-2026-63861 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal. | ||||
| CVE-2026-63864 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from visit_tailcall_insn Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value. | ||||
| CVE-2026-16566 | 2026-07-22 | 6.1 Medium | ||
| A flaw was found in the community.general Ansible collection's jenkins_credential module. When creating a Jenkins API token (credential_type: token), the module correctly protects the input password with no_log=True in the argument specification, but places the generated API token returned by the Jenkins API directly into the Ansible task result dictionary without output suppression. The token is emitted in plaintext via exit_json(), causing it to appear in Ansible task output, AWX/Tower/AAP Controller job logs, callback plugin output, CI/CD pipeline logs, and fact caching backends. An attacker with access to any of these output channels can obtain the Jenkins API token and gain the same privileges as the user who created it. | ||||
| CVE-2026-63882 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) | ||||
| CVE-2026-63891 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. | ||||
| CVE-2026-63902 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ] | ||||