Export limit exceeded: 378294 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378294 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74425 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: handle CB.InitCallBackState3 requests without a server record The cache manager callback path now attaches the server record to an incoming call through the rxrpc peer's app data. That association is not guaranteed to exist for every callback request, and most callback handlers already tolerate that case. Make CB.InitCallBackState3 follow the same pattern by checking whether a server record was attached before using it. If the peer is not mapped to a server record, trace the request and ignore it, matching the existing behaviour for other unmatched callback requests. This keeps the callback handler consistent with the rest of the cache manager service and avoids depending on peer state that may not be available for a given request. | ||||
| CVE-2026-74424 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles. | ||||
| CVE-2026-74423 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix leak when pinning ubuf pages When pin_user_pages_fast() returns fewer pages than requested, the pages that were successfully pinned are not released, leading to a leak. Fix this by unpinning any partially pinned pages before returning failure. | ||||
| CVE-2026-74422 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: inno-hdmi: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one. | ||||
| CVE-2026-74421 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one. | ||||
| CVE-2026-74420 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page objects, which GPUSVM requires in order to operate correctly. In particular, get_pages() relies on hmm_range_fault() to resolve struct pages for the target range. Attempting to create an SVM range on such VMAs results in repeated get_pages() failures and can lead to an infinite loop inside a driver’s page‑fault handler. Prevent this by rejecting ranges on VM_IO or VM_PFNMAP VMAs and returning -EIO. | ||||
| CVE-2026-74419 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing. | ||||
| CVE-2026-74418 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-fence: Fix potential tracepoint null pointer dereferences Trace_dma_fence_signaled, trace_dma_fence_wait_end and trace_dma_fence_destroy can all currently dereference a null fence->ops pointer after it has been reset on fence signalling. Lets use the safe string getters for most tracepoints to avoid this class of a problem, while for the signal tracepoint we move it to before ops are cleared to avoid losing the driver and timeline name information. Apart from moving it we also need to add a new tracepoint class to bypass the safe name getters since the signaled bit is already set. For dma_fence_init we also need to use the new tracepoint class since the rcu read lock is not held there, and we can do the same for the enable signaling since there we are certain the fence cannot be signaled while we are holding the lock and have even validated the fence->ops. | ||||
| CVE-2026-74417 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry. | ||||
| CVE-2026-74416 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix memory leak in radeon_ring_restore() on lock failure radeon_ring_restore() takes ownership of the data buffer allocated by radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in the non-restore branch; in the restore branch it relies on radeon_ring_restore() to free it. If radeon_ring_lock() fails, the function returned early without calling kvfree(data), leaking the ring backup buffer on every GPU reset that fails at the lock stage. During repeated GPU resets this causes cumulative kernel memory exhaustion. Free data before returning the error. | ||||
| CVE-2026-74415 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: atcspi200: fix use-after-free when driver unbind DMA resource is initialized after SPI controller registration. So when driver unbind, this can trigger a use-after-free when DMA is torn down while the controller is still alive and triggers DMA transfers. | ||||
| CVE-2026-74414 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: Remove the duplicate attr inode dirty marking action Syzbot reported a null-ptr-deref in [1]. If the attributes file is not loaded during system mount, a trigger occurs [1] when setxattr is executed in userspace. Remove the first mark attr inode dirty operation. [1] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Call Trace: hfsplus_setxattr+0x124/0x340 fs/hfsplus/xattr.c:555 hfsplus_trusted_setxattr+0x40/0x60 fs/hfsplus/xattr_trusted.c:30 __vfs_setxattr+0x43c/0x480 fs/xattr.c:218 __vfs_setxattr_noperm+0x12d/0x660 fs/xattr.c:252 vfs_setxattr+0x163/0x360 fs/xattr.c:339 do_setxattr fs/xattr.c:654 [inline] | ||||
| CVE-2026-74413 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. The adjacent io_slot_reset() already does it correctly. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. Tested on RTL8852CE by calling the handlers from a test module before and after the fix. | ||||
| CVE-2026-74412 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. | ||||
| CVE-2026-74411 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Correct data type for scan index to avoid infinite loop A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band. The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds, leading to a system panic. RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends the low 8 bits of RBX into RAX. RBX (the counter i) has reached a huge value: 0x137466a1. watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124] Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core] Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01 <0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49 RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202 RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000 RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130 RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080 R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870 R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80 FS: 0000000000000000(0000) GS:ffff8a014f962000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0 Call Trace: <TASK> rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core] rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core] ? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core] rtw89_ops_hw_scan+0xae/0x120 [rtw89_core] drv_hw_scan+0xbb/0x180 [mac80211] __ieee80211_start_scan+0x2fc/0x750 [mac80211] ieee80211_request_scan+0xe/0x20 [mac80211] ieee80211_scan+0x123/0x190 [mac80211] rdev_scan+0x40/0x110 [cfg80211] cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211] By objdump with source: for (i = 0; i < req->n_6ghz_params; i++) { 5fbc0: 83 c3 01 add $0x1,%ebx --> i++ 5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax * RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161) | ||||
| CVE-2026-74410 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. | ||||
| CVE-2026-74409 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values. | ||||
| CVE-2026-74408 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. | ||||
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74406 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix potential null-ptr-deref in vxlan_gro_prepare_receive(). udp_tunnel_sock_release() could set sk->sk_user_data to NULL while vxlan_gro_prepare_receive() is running. Let's check if rcu_dereference_sk_user_data() is NULL after skb_gro_remcsum_init(). | ||||