Export limit exceeded: 372427 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372427 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64349 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs | ||||
| CVE-2026-64353 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map. | ||||
| CVE-2026-64356 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix memory leak in xfs_dqinode_metadir_create() If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current code returns directly, leaking the allocated update and transaction state. If the subsequent commit fails, the caller-owned inode reference is left behind. Fix this memory leak by routing the create failure path through xfs_metadir_cancel(). For both create and commit failures, finish and release any inode returned to the caller, mirroring the unwind pattern in xfs_metadir_mkdir(). The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. Runtime validation used kprobe fault injection during `mount -o uquota` on a metadir XFS image. Injecting xfs_metadir_create() reproduced the old active-update path that left mount stuck later in mount setup; after this change, the same injection reported cancel_hits=1 and irele_hits=1. Injecting xfs_metadir_commit() exercised the old inode-reference leak path; after this change, it reported irele_hits=1. | ||||
| CVE-2026-64358 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: cancel workqueue on release for supported platforms only Since a recent fix the mtk_jpeg_release function cancels any pending or running work present in the driver workqueue using cancel_work_sync function. Currently, only the multicore based variants use this workqueue and they have the jpeg_worker platform data field initialized with a workqueue callback function. For the others, this field value remain NULL by default. The cancel_work_sync function is unconditionally called in mtk_jpeg_release function, even for the variants that do not use the workqueue. This call generates a WARN_ON print in __flush_work because the workqueue callback function presence check fails in __flush_work function (used by cancel_work_sync). So, to avoid these warnings, call cancel_work_sync only if a workqueue callback is defined in platform data. | ||||
| CVE-2026-64368 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled When init (zeroing) on allocation is requested, for kmalloc() we generally have to zero the full object size even if a smaller size is requested, in order to provide krealloc()'s __GFP_ZERO guarantees. But if we track the requested size, krealloc() uses that information to do the right thing, so we can zero only the requested size. With red zoning also enabled, any extra size became part of the red zone, so it must not be zeroed and thus we must zero only the requested size. However the current check is imprecise, and will trigger also when only SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking the requested size). This means enabling red zoning alone can compromise krealloc()'s __GFP_ZERO contract. Fix this by using slub_debug_orig_size() instead, which is the exact check for whether the requested size is tracked. We don't need to care if red zoning is also enabled or not. Also update and expand the comment accordingly. | ||||
| CVE-2026-64384 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64388 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix chown/chgrp with SMB3 POSIX Extensions Ownership (chown) and group (chgrp) modifications were being ignored when mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or CIFS_MOUNT_MODE_FROM_SID were also explicitly set. Fix this by checking for posix_extensions in cifs_setattr_nounix() when updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map and set the ownership/group information on the server. | ||||
| CVE-2026-64406 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in bt_accept_dequeue() bt_accept_get() takes a temporary reference before dropping the accept queue lock. bt_accept_dequeue() currently drops that reference before bt_accept_unlink(), leaving only the queue reference. bt_accept_unlink() drops the queue reference. The subsequent sock_hold() therefore accesses freed memory if it was the final reference, as observed by KASAN during listening L2CAP socket cleanup. Retain the temporary queue-walk reference through unlink and hand it to the caller on success. Drop it explicitly on the closed and not-yet-connected paths. | ||||
| CVE-2026-64409 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work() Every once in a while we see a hung btmtksdio_flush() task: INFO: task kworker/u17:0:189 blocked for more than 122 seconds. __cancel_work_timer+0x3f4/0x460 cancel_work_sync+0x1c/0x2c btmtksdio_flush+0x2c/0x40 hci_dev_open_sync+0x10c4/0x2190 [..] It all boils down to incorrect time_is_before_jiffies() usage in btmtksdio_txrx_work(). The btmtksdio_txrx_work() loop is expected to be terminated if running for longer than 5*HZ. However the timeout check is twisted: time_is_before_jiffies(old_jiffies + 5*HZ) evaluates to true when old_jiffies + 5*HZ is in the past i.e. when a timeout has occurred. Using OR with time_is_before_jiffies(txrx_timeout) means that: - before the 5-second timeout: the condition is `int_status || false`, so it loops as long as there are pending interrupts. - after the 5-second timeout: the condition becomes `int_status || true`, which is always true. When the loop becomes infinite btmtksdio_txrx_work() loop never terminates and never releases the SDIO host. Fix loop termination condition to actually enforce a 5*HZ timeout. | ||||
| CVE-2026-64412 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: module names must be null-terminated We need to explicitly check the length, else we may pass non-null terminated string to request_module(). | ||||
| CVE-2026-64415 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup We hit a real softlockup in an internal stress test environment. The workload was LTP memory/swap stress on a large arm64 machine, with 320 CPUs, about 1TB memory and an 8.6GB swap device. The system was under heavy load and the swap device had a large number of full clusters. The softlockup was triggered during a stress test after about 3 days. So, add periodic cond_resched() calls during large full_clusters reclaim operations to prevent softlockup issues. Detailed call trace as follow: PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7" #0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4 #1 [ffff800080183d90] panic at ffffa4c1360d5e9c #2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8 ... #16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614 #17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc #18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474 #19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c #20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc #21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398 #22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c | ||||
| CVE-2026-64428 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sch: use raw_spinlock_t in the irq startup path sch_irq_unmask() enables the GPIO IRQ and then updates the controller state through sch_irq_mask_unmask(), which takes sch->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the SCH controller lock to raw_spinlock_t. The same lock is also used by the GPIO direction and value callbacks, but those critical sections only update MMIO-backed GPIO registers and do not contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64451 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix NULL pointer dereference in func_set_flag() func_set_flag() dereferences tr->current_trace_flags before verifying that the current tracer is actually the function tracer. When the active tracer has been switched away from "function" (e.g., to "wakeup_rt"), tr->current_trace_flags can be NULL, leading to a NULL pointer dereference and kernel crash. The call chain that triggers this is: trace_options_write() -> __set_tracer_option() -> trace->set_flag() /* func_set_flag */ In func_set_flag(), the first operation is: if (!!set == !!(tr->current_trace_flags->val & bit)) This dereferences tr->current_trace_flags unconditionally. The safety check that guards against a non-function tracer: if (tr->current_trace != &function_trace) return 0; is placed *after* the dereference, which is too late. This was observed with the following crash dump: BUG: unable to handle page fault at 0000000000000000 RIP: func_set_flag+0xd Call Trace: __set_tracer_option+0x27 trace_options_write+0x75 vfs_write+0x12a ksys_write+0x66 do_syscall_64+0x5b RIP: ffffffff914c973d RSP: ff67ec88b01dfdf0 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ff3a826e80354580 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff93918080 The disassembly confirms the fault: func_set_flag+0: mov 0x1f08(%rdi), %rax ; RAX = tr->current_trace_flags = NULL func_set_flag+13: mov (%rax), %eax ; page fault: dereference NULL At the time of the crash: tr->current_trace_flags = 0x0 (NULL) tr->current_trace = wakeup_rt_tracer (not function_trace) The scenario is that a process opens a function tracer option file (such as "func_stack_trace"), then the current tracer is switched to another tracer (e.g., "wakeup_rt"), which sets current_trace_flags to NULL. When the process subsequently writes to the option file, func_set_flag() is invoked and crashes on the NULL dereference. Fix this by moving the current_trace check before the current_trace_flags dereference, so that func_set_flag() returns early when the function tracer is not active. | ||||
| CVE-2026-64465 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix sleep in atomic context in xhci_free_streams() When a USB device with active stream endpoints is disconnected, xhci_free_streams() is called from the hub_event workqueue to free the stream resources. It calls xhci_free_stream_info() while holding xhci->lock with irqs disabled. xhci_free_stream_info() invokes xhci_free_stream_ctx(), which calls dma_free_coherent() for large stream context arrays. dma_free_coherent() can sleep (e.g. via vunmap), triggering a BUG when called from atomic context. Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63c Fix this by saving the stream_info pointers and clearing the ep references under the lock, then calling xhci_free_stream_info() outside the lock where sleeping is allowed. | ||||
| CVE-2026-64472 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix racy bitfields and tighten struct layout Bitfield operations are not atomic, they use a read-modify-write pattern, therefore we should be careful not to pack bitfields that can be concurrently updated into the same storage unit. This split takes a binary approach: flags that are only modified pre/post open/close remain bitfields, flags modified from user action, including actions that reach across to another device (ex. reset) use dedicated storage units. Note mlx5_vhca_page_tracker.status is relocated to fill the alignment hole this split exposes. Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe Dedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime | ||||
| CVE-2026-64476 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper. | ||||
| CVE-2026-64477 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario. | ||||
| CVE-2026-64482 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||