| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FlexRIC v2.0.0 contains a reachable assertion in e2ap_recv_sctp_msg() (src/lib/ep/e2ap_ep.c). The function allocates a fixed 32KB receive buffer and enforces assert(rc < len) on the sctp_recvmsg() return value. A remote unauthenticated attacker can send a single SCTP message with payload >= 32,768 bytes to crash the near-RT RIC, iApp, E2 Agent, or xApp process via SIGABRT. No valid E2AP PDU is required. All four SCTP endpoint types (ports 36421 and 36422) share this vulnerable code path. In Release builds (NDEBUG), the stripped assertion leads to a signed-to-unsigned integer overflow and potential out-of-bounds read. |
| FlexRIC v2.0.0 contains a reachable assertion in e2ap_create_pdu() triggered when ASN.1 PER decoding fails. A remote unauthenticated attacker can send any non-PER byte sequence (e.g., a single 0x00 byte) over SCTP to the near-RT RIC (port 36421) or iApp (port 36422) to crash the process via SIGABRT. The assertion is reached before any protocol-level validation occurs. All three E2AP protocol versions (v1.01, v2.03, v3.01) are affected. |
| Insufficient session expiration vulnerability in syslink software AG Avantra on Linux, Windows allows Reusing Session IDs (aka Session Replay).
This issue affects Avantra: before 25.3.1. |
| Alkacon OpenCms before 10.5.1 allows remote unauthenticated attackers to obtain sensitive information via a cmis-online/query XXE attack on a Chemistry servlet. |
| In the Linux kernel, the following vulnerability has been resolved:
romfs: check sb_set_blocksize() return value
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0. |
| VMware Tools for Windows(12.0.0, 11.x.y and 10.x.y) contains an XML External Entity (XXE) vulnerability. A malicious actor with non-administrative local user privileges in the Windows guest OS, where VMware Tools is installed, may exploit this issue leading to a denial-of-service condition or unintended information disclosure. |
| A security vulnerability has been detected in SGLang 0.5.10.post1. Impacted is an unknown function of the file python/sglang/srt/lora/lora_manager.py of the component Inference HTTP Endpoint. Such manipulation of the argument lora_path leads to reachable assertion. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is considered difficult. The exploit has been disclosed publicly and may be used. The pull request to fix this issue awaits acceptance. |
| FlexRIC v2.0.0 crashes when the iApp receives an E42_RIC_SUBSCRIPTION_REQUEST with an empty ricEventTriggerDefinition field. The E42 layer decoder accepts this as valid, but the E2AP encoder asserts a non-empty constraint when forwarding the request. A remote unauthenticated attacker can crash the iApp process (port 36422) via SIGABRT by exploiting this cross-layer validation mismatch. |
| FlexRIC v2.0.0 contains a reachable assertion in the iApp message dispatcher. The dispatcher validates incoming E2AP messages against a 9-entry whitelist using assert(). A remote unauthenticated attacker can send any decodable E2AP PDU with a message type not in the whitelist to crash the iApp process (port 36422) via SIGABRT. Since iApp and the near-RT RIC share one process, this terminates the entire RIC service and disconnects all E2 Nodes and xApps. |
| FlexRIC v2.0.0 crashes when receiving a duplicate E2_SETUP_REQUEST from the same or spoofed E2 Node. The iApp registry enforces node ID uniqueness via assert() rather than graceful rejection. A remote unauthenticated attacker can crash the iApp process (port 36421) by sending two E2_SETUP_REQUESTs with the same E2 node configuration, triggering SIGABRT. |
| FlexRIC v2.0.0 contains reachable assert(0) calls in stub message handlers for whitelisted but unimplemented E2AP message types in the near-RT RIC. A remote unauthenticated attacker can send a decodable E2AP PDU of such a type (e.g., E2nodeConfigurationUpdate) to crash the near-RT RIC process (port 36421) via SIGABRT. The message passes whitelist validation but triggers an unconditional assertion in the handler. |
| A security issue was discovered with Kubernetes that could enable users to send network traffic to locations they would otherwise not have access to via a confused deputy attack. |
| A security issue was discovered in Kubernetes where actors that control the responses of MutatingWebhookConfiguration or ValidatingWebhookConfiguration requests are able to redirect kube-apiserver requests to private networks of the apiserver. If that user can view kube-apiserver logs when the log level is set to 10, they can view the redirected responses and headers in the logs. |
| FlexRIC v2.0.0 crashes when an SCTP association is closed before an E2_SETUP_REQUEST is sent. The near-RT RIC assumes a mapping between SCTP association and E2 node always exists in the cleanup path and enforces this via assert(). A remote unauthenticated attacker can crash the near-RT RIC (port 36421) by simply completing an SCTP handshake and immediately disconnecting, without sending any E2AP message. |
| FlexRIC v2.0.0 uses hardcoded assertions to validate Information Element (IE) counts in decoded E2AP messages. A remote unauthenticated attacker can send a valid E2AP PDU containing an unexpected number of IEs (e.g., an E2setupRequest with extra optional fields) to crash the near-RT RIC (port 36421) or iApp (port 36422) via SIGABRT. The code asserts exact IE counts rather than validating against protocol-specified ranges. |
| FlexRIC v2.0.0 crashes when receiving a RIC_SUBSCRIPTION_RESPONSE with an unknown ric_id that has no corresponding pending event. The near-RT RIC uses assert() to enforce the existence of a pending event during response processing. A remote unauthenticated attacker can send a forged RIC_SUBSCRIPTION_RESPONSE to the near-RT RIC (port 36421) to cause SIGABRT in Debug builds or NULL pointer dereference (SIGSEGV) in Release builds. |
| Cargo incorrectly handled symlinks inside of crate tarballs downloaded from third-party registries, allowing a malicious crate to override the source code of another crate from the same registry. The severity of the vulnerability is **medium** for users of third-party registries. Users of crates.io are **not affected**, as crates.io forbids uploading crates containing any symlink. |
| Apache Airflow's `JWTRefreshMiddleware` set the JWT auth cookie without the `Secure` flag, so deployments running the Airflow API server behind an HTTPS-terminating reverse proxy (e.g. nginx / Envoy / a managed load balancer that terminates TLS and forwards plaintext to the API server, the default cloud-native topology) would have the user's session JWT replayed over any cleartext HTTP request to the same host. A network-positioned attacker (Wi-Fi MITM, hostile LAN, captive-portal proxy) could induce a logged-in user's browser to issue an HTTP request to the deployment's hostname and capture the JWT cookie out of that request, then replay it against the authenticated API. Affects deployments where the Airflow API server is reached through a TLS-terminating proxy and the cookie's secure-by-default protection is load-bearing for session integrity. Users are advised to upgrade to `apache-airflow` 3.2.2 or later. |
| Tunnelblick is an open source graphic user interface for OpenVPN on macOS. In versions 3.3beta26 through 9.0beta01, any local user can read arbitrary root-owned files by exploiting a symlink following vulnerability in tunnelblick-helper, reachable through the world-accessible tunnelblickd Unix socket. The socket is configured with mode 0666, allowing any local user to connect. No authorization check is performed on the connecting client. The tunnelblick-helper process constructs a path to config.ovpn inside a user-controlled .tblk directory and reads it as root without symlink validation. An attacker can create a .tblk configuration with a symlinked config.ovpn pointing to any file and request tunnelblickd to read it. This issue has been fixed in versions 9.0beta02. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: clean up FDB, MDB, VLAN entries on unbind
As explained in many places such as commit b117e1e8a86d ("net: dsa:
delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given
the assumption that higher layers have balanced additions/deletions.
As such, it only makes sense to be extremely vocal when those
assumptions are violated and the driver unbinds with entries still
present.
But Ido Schimmel points out a very simple situation where that is wrong:
https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/
(also briefly discussed by me in the aforementioned commit).
Basically, while the bridge bypass operations are not something that DSA
explicitly documents, and for the majority of DSA drivers this API
simply causes them to go to promiscuous mode, that isn't the case for
all drivers. Some have the necessary requirements for bridge bypass
operations to do something useful - see dsa_switch_supports_uc_filtering().
Although in tools/testing/selftests/net/forwarding/local_termination.sh,
we made an effort to popularize better mechanisms to manage address
filters on DSA interfaces from user space - namely macvlan for unicast,
and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the
fact is that 'bridge fdb add ... self static local' also exists as
kernel UAPI, and might be useful to someone, even if only for a quick
hack.
It seems counter-productive to block that path by implementing shim
.ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP
in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from
running, although we could do that.
Accepting that cleanup is necessary seems to be the only option.
Especially since we appear to be coming back at this from a different
angle as well. Russell King is noticing that the WARN_ON() triggers even
for VLANs:
https://lore.kernel.org/netdev/Z_li8Bj8bD4-BYKQ@shell.armlinux.org.uk/
What happens in the bug report above is that dsa_port_do_vlan_del() fails,
then the VLAN entry lingers on, and then we warn on unbind and leak it.
This is not a straight revert of the blamed commit, but we now add an
informational print to the kernel log (to still have a way to see
that bugs exist), and some extra comments gathered from past years'
experience, to justify the logic. |
