| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_pci_remove()
Kmemleak reported this error:
unreferenced object 0xffff1c165cec3060 (size 32):
comm "insmod", pid 560, jiffies 4296964570 (age 235.596s)
backtrace:
[<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0
[<000000001203b155>] kmalloc_trace+0x40/0x88
[<0000000028adc9c8>] _request_firmware+0xb8/0x608
[<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80
[<000000005011a682>] local_pci_probe+0x48/0xd0
[<00000000077cd295>] pci_device_probe+0xb4/0x200
[<0000000087184c94>] really_probe+0x150/0x2c0
The firmware memory was allocated in ath12k_pci_probe(), but not
freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is
set. So call ath12k_fw_unmap() to free the memory.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid memory leak while enabling statistics
Driver uses monitor destination rings for extended statistics mode and
standalone monitor mode. In extended statistics mode, TLVs are parsed from
the buffer received from the monitor destination ring and assigned to the
ppdu_info structure to update per-packet statistics. In standalone monitor
mode, along with per-packet statistics, the packet data (payload) is
captured, and the driver updates per MSDU to mac80211.
When the AP interface is enabled, only extended statistics mode is
activated. As part of enabling monitor rings for collecting statistics,
the driver subscribes to HAL_RX_MPDU_START TLV in the filter
configuration. This TLV is received from the monitor destination ring, and
kzalloc for the mon_mpdu object occurs, which is not freed, leading to a
memory leak. The kzalloc for the mon_mpdu object is only required while
enabling the standalone monitor interface. This causes a memory leak while
enabling extended statistics mode in the driver.
Fix this memory leak by removing the kzalloc for the mon_mpdu object in
the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone
monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs.
These TLV tags will be handled properly when enabling standalone monitor
mode in the future.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix multishot accept request leaks
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues. |
| GE Multilink ML800, ML1200, ML1600, and ML2400 switches with firmware 4.2.1 and earlier and Multilink ML810, ML3000, and ML3100 switches with firmware 5.2.0 and earlier allow remote attackers to cause a denial of service (resource consumption or reboot) via crafted packets. |
| Unlimited memory allocation in redis protocol parser in Apache bRPC (all versions < 1.14.1) on all platforms allows attackers to crash the service via network.
Root Cause: In the bRPC Redis protocol parser code, memory for arrays or strings of corresponding sizes is allocated based on the integers read from the network. If the integer read from the network is too large, it may cause a bad alloc error and lead to the program crashing. Attackers can exploit this feature by sending special data packets to the bRPC service to carry out a denial-of-service attack on it.
The bRPC 1.14.0 version tried to fix this issue by limited the memory allocation size, however, the limitation checking code is not well implemented that may cause integer overflow and evade such limitation. So the 1.14.0 version is also vulnerable, although the integer range that affect version 1.14.0 is different from that affect version < 1.14.0.
Affected scenarios: Using bRPC as a Redis server to provide network services to untrusted clients, or using bRPC as a Redis client to call untrusted Redis services.
How to Fix: we provide two methods, you can choose one of them:
1. Upgrade bRPC to version 1.14.1.
2. Apply this patch ( https://github.com/apache/brpc/pull/3050 ) manually.
No matter you choose which method, you should note that the patch limits the maximum length of memory allocated for each time in the bRPC Redis parser. The default limit is 64M. If some of you redis request or response have a size larger than 64M, you might encounter error after upgrade. For such case, you can modify the gflag redis_max_allocation_size to set a larger limit. |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat if an HTTP/2 client did not acknowledge the initial settings frame that reduces the maximum permitted concurrent streams.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.8, from 10.1.0-M1 through 10.1.42, from 9.0.0.M1 through 9.0.106.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 through 8.5.100. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.9, 10.1.43 or 9.0.107, which fix the issue. |
| Late Release of Memory after Effective Lifetime vulnerability in Apache HTTP Server.
This issue affects Apache HTTP Server: from 2.4.17 up to 2.4.63.
Users are recommended to upgrade to version 2.4.64, which fixes the issue. |
| Apache CXF stores large stream based messages as temporary files on the local filesystem. A bug was introduced which means that the entire temporary file is read into memory and then logged. An attacker might be able to exploit this to cause a denial of service attack by causing an out of memory exception. In addition, it is possible to configure CXF to encrypt temporary files to prevent sensitive credentials from being cached unencrypted on the local filesystem, however this bug means that the cached files are written out to logs unencrypted.
Users are recommended to upgrade to versions 3.5.11, 3.6.6, 4.0.7 or 4.1.1, which fixes this issue. |
| A vulnerability in Apache IoTDB.
This issue affects Apache IoTDB: from 1.3.3 through 1.3.4, from 2.0.1-beta through 2.0.4.
Users are recommended to upgrade to version 2.0.5, which fixes the issue. |
| A vulnerability was identified in the kjd/idna library, specifically within the `idna.encode()` function, affecting version 3.6. The issue arises from the function's handling of crafted input strings, which can lead to quadratic complexity and consequently, a denial of service condition. This vulnerability is triggered by a crafted input that causes the `idna.encode()` function to process the input with considerable computational load, significantly increasing the processing time in a quadratic manner relative to the input size. |
| HTTP/2 incoming headers exceeding the limit are temporarily buffered in nghttp2 in order to generate an informative HTTP 413 response. If a client does not stop sending headers, this leads to memory exhaustion. |
| latchset jose through version 11 allows attackers to cause a denial of service (CPU consumption) via a large p2c (aka PBES2 Count) value. |
| A vulnerability, which was classified as problematic, has been found in GNU elfutils 0.192. This issue affects the function gelf_getsymshndx of the file strip.c of the component eu-strip. The manipulation leads to denial of service. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is fbf1df9ca286de3323ae541973b08449f8d03aba. It is recommended to apply a patch to fix this issue. |
| A resource exhaustion issue was addressed with improved input validation. This issue is fixed in iOS 17 and iPadOS 17, macOS Sonoma 14. Processing web content may lead to a denial-of-service. |
| A vulnerability in Outline.cc for Poppler prior to 23.06.0 allows a remote attacker to cause a Denial of Service (DoS) (crash) via a crafted PDF file in OutlineItem::open. |
| Closing of an event channel in the Linux kernel can result in a deadlock.
This happens when the close is being performed in parallel to an unrelated
Xen console action and the handling of a Xen console interrupt in an
unprivileged guest.
The closing of an event channel is e.g. triggered by removal of a
paravirtual device on the other side. As this action will cause console
messages to be issued on the other side quite often, the chance of
triggering the deadlock is not neglectable.
Note that 32-bit Arm-guests are not affected, as the 32-bit Linux kernel
on Arm doesn't use queued-RW-locks, which are required to trigger the
issue (on Arm32 a waiting writer doesn't block further readers to get
the lock). |
| Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification 1.0B through 5.2 may permit an unauthenticated nearby device to spoof the BD_ADDR of the peer device to complete pairing without knowledge of the PIN. |
| A vulnerability has been found in GNU elfutils 0.192 and classified as problematic. This vulnerability affects the function handle_dynamic_symtab of the file readelf.c of the component eu-read. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The patch is identified as b38e562a4c907e08171c76b8b2def8464d5a104a. It is recommended to apply a patch to fix this issue. |
| HTTP/2 CONTINUATION DoS attack can cause Apache Traffic Server to consume more resources on the server. Version from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.3 are affected.
Users can set a new setting (proxy.config.http2.max_continuation_frames_per_minute) to limit the number of CONTINUATION frames per minute. ATS does have a fixed amount of memory a request can use and ATS adheres to these limits in previous releases.
Users are recommended to upgrade to versions 8.1.10 or 9.2.4 which fixes the issue. |
| Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections. |
