| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Some classic Cisco IOS devices have a vulnerability in the PPP CHAP authentication to establish unauthorized PPP connections. |
| IP Security VPN Services Module (VPNSM) in Cisco Catalyst 6500 Series Switch and the Cisco 7600 Series Internet Routers running IOS before 12.2(17b)SXA, before 12.2(17d)SXB, or before 12.2(14)SY03 could allow remote attackers to cause a denial of service (device crash and reload) via a malformed Internet Key Exchange (IKE) packet. |
| Cisco IOS 2.2(18)EW, 12.2(18)EWA, 12.2(14)SZ, 12.2(18)S, 12.2(18)SE, 12.2(18)SV, 12.2(18)SW, and other versions without the "no service dhcp" command, keep undeliverable DHCP packets in the queue instead of dropping them, which allows remote attackers to cause a denial of service (dropped traffic) via multiple undeliverable DHCP packets that exceed the input queue size. |
| Buffer overflow in the HTTP server for Cisco IOS 12.2 and earlier allows remote attackers to execute arbitrary code via an extremely long (2GB) HTTP GET request. |
| Vulnerability in Cisco IOS 11.1 through 11.3 with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled input interface to an output interface with a logical subinterface, as described by Cisco bug CSCdk43862. |
| The web server for Cisco Aironet AP1x00 Series Wireless devices running certain versions of IOS 12.2 allow remote attackers to cause a denial of service (reload) via a malformed URL. |
| Cisco IOS 12.0, 12.1, and 12.2, when GRE IP tunneling is used and the RFC2784 compliance fixes are missing, does not verify the offset field of a GRE packet during decapsulation, which leads to an integer overflow that references data from incorrect memory locations, which allows remote attackers to inject crafted packets into the routing queue, possibly bypassing intended router ACLs. |
| Cross-site scripting (XSS) vulnerability in Cisco IOS Web Server for IOS 12.0(2a) allows remote attackers to inject arbitrary web script or HTML by (1) packets containing HTML that an administrator views via an HTTP interface to the contents of memory buffers, as demonstrated by the URI /level/15/exec/-/buffers/assigned/dump; or (2) sending the router Cisco Discovery Protocol (CDP) packets with HTML payload that an administrator views via the CDP status pages. NOTE: these vectors were originally reported as being associated with the dump and packet options in /level/15/exec/-/show/buffers. |
| A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL. |
| A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition. |
| A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition.
This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a crash of the dhcpd process. While the dhcpd process is restarting, which may take approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period and rely on the DHCPv4 server of the affected device.
Notes:
Only the dhcpd process crashes and eventually restarts automatically. The router does not reload.
This vulnerability only applies to DHCPv4. DHCP version 6 (DHCPv6) is not affected. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the Address Resolution Protocol (ARP) implementation of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to trigger a broadcast storm, leading to a denial of service (DoS) condition on an affected device.
This vulnerability is due to how Cisco IOS XR Software processes a high, sustained rate of ARP traffic hitting the management interface. Under certain conditions, an attacker could exploit this vulnerability by sending an excessive amount of traffic to the management interface of an affected device, overwhelming its ARP processing capabilities. A successful exploit could result in degraded device performance, loss of management connectivity, and complete unresponsiveness of the system, leading to a DoS condition. |
| A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper handling of malformed Control and Provisioning of Wireless Access Points (CAPWAP) packets. An attacker could exploit this vulnerability by sending malformed CAPWAP packets through an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the HTTP API subsystem of Cisco IOS XE Software could allow a remote attacker to inject commands that will execute with root privileges into the underlying operating system.
This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by authenticating to an affected system and performing an API call with crafted input. Alternatively, an unauthenticated attacker could persuade a legitimate user with administrative privileges who is currently logged in to the system to click a crafted link. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability.
This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload. |
| Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust.
These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system.
Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
For more information about these vulnerabilities, see the Details ["#details"] section of this advisory.
ERP |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the Web Authentication feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting attack (XSS) on an affected device.
This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute a reflected XSS attack and steal user cookies from the affected device. |
| A vulnerability in the Cisco Industrial Ethernet Switch Device Manager (DM) of Cisco IOS Software could allow an authenticated, remote attacker to elevate privileges.
This vulnerability is due to insufficient validation of authorizations for authenticated users. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to elevate privileges to privilege level 15.
To exploit this vulnerability, the attacker must have valid credentials for a user account with privilege level 5 or higher. Read-only DM users are assigned privilege level 5. |
