| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In EMQX before 5.8.6, administrators can install arbitrary novel plugins via the Dashboard web interface. NOTE: the Supplier's position is that this is the intended behavior; however, 5.8.6 adds a defense-in-depth feature in which a plugin's acceptability (for later Dashboard installation) is set by the "emqx ctl plugins allow" CLI command. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f. |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. matrix-appservice-irc before version 2.0.0 can be exploited to leak the truncated body of a message if a malicious user sends a Matrix reply to an event ID they don't have access to. As a precondition to the attack, the malicious user needs to know the event ID of the message they want to leak, as well as to be joined to both the Matrix room and the IRC channel it is bridged to. The message reply containing the leaked message content is visible to IRC channel members when this happens. matrix-appservice-irc 2.0.0 checks whether the user has permission to view an event before constructing a reply. Administrators should upgrade to this version. It's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. See these lines `601-604` in the configuration file linked. |
| VMware vCenter contains a denial-of-service vulnerability. A malicious actor who is authenticated through vCenter and has permission to perform API calls for guest OS customisation may trigger this vulnerability to create a denial-of-service condition. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). Affected devices do not properly handle malformed TLS handshake messages. This could allow an attacker with network access to the webserver to cause a denial of service resulting in the web server and the device to crash. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A flaw was found in libsoup. The libsoup soup_uri_decode_data_uri() function may crash when processing malformed data URI. This flaw allows an attacker to cause a denial of service (DoS). |
| A denial-of-service vulnerability exists in the affected products. The vulnerability could allow a remote, non-privileged user to send malicious requests resulting in a major nonrecoverable fault causing a denial-of-service. |
| matrix-hookshot is a Matrix bot for connecting to external services like GitHub, GitLab, JIRA, and more. When Hookshot 6 version 6.0.1 or below, or Hookshot 5 version 5.4.1 or below, is configured with GitHub support, it is vulnerable to a Denial of Service (DoS) whereby it can crash on restart due to a missing check. The impact is greater to you untrusted users can add their own GitHub organizations to Hookshot in order to connect their room to a repository. This vulnerability is fixed in 6.0.2 and 5.4.2. |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper conditions check for the Intel(R) Optane(TM) PMem management software before versions CR_MGMT_02.00.00.4052, CR_MGMT_03.00.00.0538 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable [cvss_threat_loss_factor]. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| When SmartStart Inclusion fails during the onboarding of a Z-Wave PIR sensor, the sensor will join the network as a non-secure device. This vulnerability exists in Silicon Labs' Z-Wave PIR Sensor Reference design delivered as part of SiSDK v2025.6.0 and v2025.6.1. |
| A Local Privilege Escalation vulnerability exists in the affected product. The vulnerability requires a local, low privileged threat actor to replace certain files during update and exists due to a failure to perform proper security checks before installation. |
| An issue in skteco.com Central Control Attendance Machine web management platform v.3.0 allows an attacker to obtain sensitive information via a crafted script to the csl/user component. |
| Versions of the package black before 24.3.0 are vulnerable to Regular Expression Denial of Service (ReDoS) via the lines_with_leading_tabs_expanded function in the strings.py file. An attacker could exploit this vulnerability by crafting a malicious input that causes a denial of service.
Exploiting this vulnerability is possible when running Black on untrusted input, or if you habitually put thousands of leading tab characters in your docstrings. |
| While parsing certain malformed PLY files, PCL version 1.14.1 crashes due to an uncaught std::out_of_range exception in PCLPointCloud2::at. This issue could potentially be exploited to cause a denial-of-service (DoS) attack when processing untrusted PLY files. |
| Wapro ERP Desktop is vulnerable to MS SQL protocol downgrade request from a server side, what could lead to an unencrypted communication vulnerable to data interception and modification. This issue affects Wapro ERP Desktop versions before 9.00.0. |
| An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.
This is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later. |
