| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks")
introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad
P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear:
WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0
Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+)
int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class
acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper
nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit
crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi
polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi
nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec
nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse
CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42
Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024
RIP: 0010:iounmap+0x58/0x1f0
Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00
RSP: 0018:ffff888131eff038 EFLAGS: 00010207
RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000
RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10
R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000
R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28
FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn.cold+0xb6/0x176
? iounmap+0x58/0x1f0
? report_bug+0x1f4/0x2b0
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? iounmap+0x58/0x1f0
pmc_core_ssram_get_pmc+0x477/0x6c0 [intel_pmc_core]
? __pfx_pmc_core_ssram_get_pmc+0x10/0x10 [intel_pmc_core]
? __pfx_do_pci_enable_device+0x10/0x10
? pci_wait_for_pending+0x60/0x110
? pci_enable_device_flags+0x1e3/0x2e0
? __pfx_mtl_core_init+0x10/0x10 [intel_pmc_core]
pmc_core_ssram_init+0x7f/0x110 [intel_pmc_core]
mtl_core_init+0xda/0x130 [intel_pmc_core]
? __mutex_init+0xb9/0x130
pmc_core_probe+0x27e/0x10b0 [intel_pmc_core]
? _raw_spin_lock_irqsave+0x96/0xf0
? __pfx_pmc_core_probe+0x10/0x10 [intel_pmc_core]
? __pfx_mutex_unlock+0x10/0x10
? __pfx_mutex_lock+0x10/0x10
? device_pm_check_callbacks+0x82/0x370
? acpi_dev_pm_attach+0x234/0x2b0
platform_probe+0x9f/0x150
really_probe+0x1e0/0x8a0
__driver_probe_device+0x18c/0x370
? __pfx___driver_attach+0x10/0x10
driver_probe_device+0x4a/0x120
__driver_attach+0x190/0x4a0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x103/0x180
? __pfx_bus_for_each_dev+0x10/0x10
? klist_add_tail+0x136/0x270
bus_add_driver+0x2fc/0x540
driver_register+0x1a5/0x360
? __pfx_pmc_core_driver_init+0x10/0x10 [intel_pmc_core]
do_one_initcall+0xa4/0x380
? __pfx_do_one_initcall+0x10/0x10
? kasan_unpoison+0x44/0x70
do_init_module+0x296/0x800
load_module+0x5090/0x6ce0
? __pfx_load_module+0x10/0x10
? ima_post_read_file+0x193/0x200
? __pfx_ima_post_read_file+0x10/0x10
? rw_verify_area+0x152/0x4c0
? kernel_read_file+0x257/0x750
? __pfx_kernel_read_file+0x10/0x10
? __pfx_filemap_get_read_batch+0x10/0x10
? init_module_from_file+0xd1/0x130
init_module_from_file+0xd1/0x130
? __pfx_init_module_from_file+0x10/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: don't allow user copy for unprivileged device
UBLK_F_USER_COPY requires userspace to call write() on ublk char
device for filling request buffer, and unprivileged device can't
be trusted.
So don't allow user copy for unprivileged device. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: Add .owner to vmclock_miscdev_fops
Without the .owner field, the module can be unloaded while /dev/vmclock0
is open, leading to an oops. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: remove kernfs active break
A warning was found:
WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828
CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G
RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0
RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202
RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000
RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04
RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180
R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08
R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0
FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
kernfs_drain+0x15e/0x2f0
__kernfs_remove+0x165/0x300
kernfs_remove_by_name_ns+0x7b/0xc0
cgroup_rm_file+0x154/0x1c0
cgroup_addrm_files+0x1c2/0x1f0
css_clear_dir+0x77/0x110
kill_css+0x4c/0x1b0
cgroup_destroy_locked+0x194/0x380
cgroup_rmdir+0x2a/0x140
It can be explained by:
rmdir echo 1 > cpuset.cpus
kernfs_fop_write_iter // active=0
cgroup_rm_file
kernfs_remove_by_name_ns kernfs_get_active // active=1
__kernfs_remove // active=0x80000002
kernfs_drain cpuset_write_resmask
wait_event
//waiting (active == 0x80000001)
kernfs_break_active_protection
// active = 0x80000001
// continue
kernfs_unbreak_active_protection
// active = 0x80000002
...
kernfs_should_drain_open_files
// warning occurs
kernfs_put_active
This warning is caused by 'kernfs_break_active_protection' when it is
writing to cpuset.cpus, and the cgroup is removed concurrently.
The commit 3a5a6d0c2b03 ("cpuset: don't nest cgroup_mutex inside
get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change
involves calling flush_work(), which can create a multiple processes
circular locking dependency that involve cgroup_mutex, potentially leading
to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 ("cpuset: break
kernfs active protection in cpuset_write_resmask()") added
'kernfs_break_active_protection' in the cpuset_write_resmask. This could
lead to this warning.
After the commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug
processing synchronous"), the cpuset_write_resmask no longer needs to
wait the hotplug to finish, which means that concurrent hotplug and cpuset
operations are no longer possible. Therefore, the deadlock doesn't exist
anymore and it does not have to 'break active protection' now. To fix this
warning, just remove kernfs_break_active_protection operation in the
'cpuset_write_resmask'. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT
In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible
context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is
to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT
is enabled.
[ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs
[ 35.118569] preempt_count: 1, expected: 0
[ 35.118571] RCU nest depth: 1, expected: 1
[ 35.118577] INFO: lockdep is turned off.
...
[ 35.118647] __might_resched+0x433/0x5b0
[ 35.118677] rt_spin_lock+0xc3/0x290
[ 35.118700] ___slab_alloc+0x72/0xc40
[ 35.118723] __kmalloc_noprof+0x13f/0x4e0
[ 35.118732] bpf_map_kzalloc+0xe5/0x220
[ 35.118740] bpf_selem_alloc+0x1d2/0x7b0
[ 35.118755] bpf_local_storage_update+0x2fa/0x8b0
[ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0
[ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66
[ 35.118795] bpf_trace_run3+0x222/0x400
[ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20
[ 35.118824] trace_inet_sock_set_state+0x112/0x130
[ 35.118830] inet_sk_state_store+0x41/0x90
[ 35.118836] tcp_set_state+0x3b3/0x640
There is no need to adjust the gfp_flags passing to the
bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL.
The verifier has ensured GFP_KERNEL is passed only in sleepable context.
It has been an old issue since the first introduction of the
bpf_local_storage ~5 years ago, so this patch targets the bpf-next.
bpf_mem_alloc is needed to solve it, so the Fixes tag is set
to the commit when bpf_mem_alloc was first used in the bpf_local_storage. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: chan: fix soft lockup in rtw89_entity_recalc_mgnt_roles()
During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process
which will re-order the list if an entry with target pattern is found.
And once one is found, should have aborted the list_for_each_entry. But,
`break` just aborted the inner for-loop. The outer list_for_each_entry
still continues. Normally, only the first entry will match the target
pattern, and the re-ordering will change nothing, so there won't be
soft lockup. However, in some special cases, soft lockup would happen.
Fix it by `goto fill` to break from the list_for_each_entry.
The following is a sample of kernel log for this problem.
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055]
[...]
RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is
not safe since for the most part entries fetched this way shall be
treated as rcu_dereference:
Note that the value returned by rcu_dereference() is valid
only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::
rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */
rcu_read_lock();
y = p->data; /* BUG!!! */
rcu_read_unlock(); |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix missing update of domains_itree after splitting iopt_area
In iopt_area_split(), if the original iopt_area has filled a domain and is
linked to domains_itree, pages_nodes have to be properly
reinserted. Otherwise the domains_itree becomes corrupted and we will UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Wait unconditionally after issuing EndXfer command
Currently all controller IP/revisions except DWC3_usb3 >= 310a
wait 1ms unconditionally for ENDXFER completion when IOC is not
set. This is because DWC_usb3 controller revisions >= 3.10a
supports GUCTL2[14: Rst_actbitlater] bit which allows polling
CMDACT bit to know whether ENDXFER command is completed.
Consider a case where an IN request was queued, and parallelly
soft_disconnect was called (due to ffs_epfile_release). This
eventually calls stop_active_transfer with IOC cleared, hence
send_gadget_ep_cmd() skips waiting for CMDACT cleared during
EndXfer. For DWC3 controllers with revisions >= 310a, we don't
forcefully wait for 1ms either, and we proceed by unmapping the
requests. If ENDXFER didn't complete by this time, it leads to
SMMU faults since the controller would still be accessing those
requests.
Fix this by ensuring ENDXFER completion by adding 1ms delay in
__dwc3_stop_active_transfer() unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Do not use WARN when encode fails
When asn1_encode_sequence() fails, WARN is not the correct solution.
1. asn1_encode_sequence() is not an internal function (located
in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.
It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.
Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information. |
| In the Linux kernel, the following vulnerability has been resolved:
amd/amdkfd: sync all devices to wait all processes being evicted
If there are more than one device doing reset in parallel, the first
device will call kfd_suspend_all_processes() to evict all processes
on all devices, this call takes time to finish. other device will
start reset and recover without waiting. if the process has not been
evicted before doing recover, it will be restored, then caused page
fault. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: range check cp bad op exception interrupts
Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Avoid consuming a stale esr value when SError occur
When any exception other than an IRQ occurs, the CPU updates the ESR_EL2
register with the exception syndrome. An SError may also become pending,
and will be synchronised by KVM. KVM notes the exception type, and whether
an SError was synchronised in exit_code.
When an exception other than an IRQ occurs, fixup_guest_exit() updates
vcpu->arch.fault.esr_el2 from the hardware register. When an SError was
synchronised, the vcpu esr value is used to determine if the exception
was due to an HVC. If so, ELR_EL2 is moved back one instruction. This
is so that KVM can process the SError first, and re-execute the HVC if
the guest survives the SError.
But if an IRQ synchronises an SError, the vcpu's esr value is stale.
If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2,
causing an unrelated guest instruction to be executed twice.
Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't
update this register so don't need to check. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Forward wakeup to smc socket waitqueue after fallback
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107
RIP: 0010:__wake_up_common+0x65/0x170
Call Trace:
<IRQ>
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_data_queue+0x4a7/0xc40
tcp_rcv_established+0x32f/0x660
? sk_filter_trim_cap+0xcb/0x2e0
tcp_v4_do_rcv+0x10b/0x260
tcp_v4_rcv+0xd2a/0xde0
ip_protocol_deliver_rcu+0x3b/0x1d0
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0x6a/0x110
? tcp_v4_early_demux+0xa2/0x140
? tcp_v4_early_demux+0x10d/0x140
ip_sublist_rcv_finish+0x49/0x60
ip_sublist_rcv+0x19d/0x230
ip_list_rcv+0x13e/0x170
__netif_receive_skb_list_core+0x1c2/0x240
netif_receive_skb_list_internal+0x1e6/0x320
napi_complete_done+0x11d/0x190
mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
__napi_poll+0x3c/0x1b0
net_rx_action+0x27c/0x300
__do_softirq+0x114/0x2d2
irq_exit_rcu+0xb4/0xe0
common_interrupt+0xba/0xe0
</IRQ>
<TASK>
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()
Using wait_event_interruptible() to wait for complete transmission,
but do not check the result of wait_event_interruptible() which can be
interrupted. It will result in TX buffer has multiple accessors and
the later process interferes with the previous process.
Following is one of the problems reported by syzbot.
=============================================================
WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0
Call Trace:
<IRQ>
? isotp_setsockopt+0x390/0x390
__hrtimer_run_queues+0xb8/0x610
hrtimer_run_softirq+0x91/0xd0
? rcu_read_lock_sched_held+0x4d/0x80
__do_softirq+0xe8/0x553
irq_exit_rcu+0xf8/0x100
sysvec_apic_timer_interrupt+0x9e/0xc0
</IRQ>
asm_sysvec_apic_timer_interrupt+0x12/0x20
Add result check for wait_event_interruptible() in isotp_sendmsg()
to avoid multiple accessers for tx buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd934x: handle channel mappping list correctly
Currently each channel is added as list to dai channel list, however
there is danger of adding same channel to multiple dai channel list
which endups corrupting the other list where its already added.
This patch ensures that the channel is actually free before adding to
the dai channel list and also ensures that the channel is on the list
before deleting it.
This check was missing previously, and we did not hit this issue as
we were testing very simple usecases with sequence of amixer commands. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: ensure task_work gets run as part of cancelations
If we successfully cancel a work item but that work item needs to be
processed through task_work, then we can be sleeping uninterruptibly
in io_uring_cancel_generic() and never process it. Hence we don't
make forward progress and we end up with an uninterruptible sleep
warning.
While in there, correct a comment that should be IFF, not IIF. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip netdev events generated on netns removal
syzbot reported following (harmless) WARN:
WARNING: CPU: 1 PID: 2648 at net/netfilter/core.c:468
nft_netdev_unregister_hooks net/netfilter/nf_tables_api.c:230 [inline]
nf_tables_unregister_hook include/net/netfilter/nf_tables.h:1090 [inline]
__nft_release_basechain+0x138/0x640 net/netfilter/nf_tables_api.c:9524
nft_netdev_event net/netfilter/nft_chain_filter.c:351 [inline]
nf_tables_netdev_event+0x521/0x8a0 net/netfilter/nft_chain_filter.c:382
reproducer:
unshare -n bash -c 'ip link add br0 type bridge; nft add table netdev t ; \
nft add chain netdev t ingress \{ type filter hook ingress device "br0" \
priority 0\; policy drop\; \}'
Problem is that when netns device exit hooks create the UNREGISTER
event, the .pre_exit hook for nf_tables core has already removed the
base hook. Notifier attempts to do this again.
The need to do base hook unregister unconditionally was needed in the past,
because notifier was last stage where reg->dev dereference was safe.
Now that nf_tables does the hook removal in .pre_exit, this isn't
needed anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix input error path memory access
When there is a misconfiguration of input state slow path
KASAN report error. Fix this error.
west login:
[ 52.987278] eth1: renamed from veth11
[ 53.078814] eth1: renamed from veth21
[ 53.181355] eth1: renamed from veth31
[ 54.921702] ==================================================================
[ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295
[ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512
[ 54.924169]
[ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25
[ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 54.926401] Call Trace:
[ 54.926731] <IRQ>
[ 54.927009] dump_stack_lvl+0x2a/0x3b
[ 54.927478] kasan_report+0x84/0xa6
[ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295
[ 54.928410] xfrmi_rcv_cb+0x2d/0x295
[ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e
[ 54.929354] xfrm4_rcv_cb+0x46/0x5e
[ 54.929804] xfrm_rcv_cb+0x7e/0xa1
[ 54.930240] xfrm_input+0x1b3a/0x1b96
[ 54.930715] ? xfrm_offload+0x41/0x41
[ 54.931182] ? raw_rcv+0x292/0x292
[ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2
[ 54.932158] ? skb_sec_path+0xd/0x3f
[ 54.932610] ? xfrmi_input+0x90/0xce
[ 54.933066] xfrm4_esp_rcv+0x33/0x54
[ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2
[ 54.934089] ip_local_deliver_finish+0x110/0x120
[ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2
[ 54.935248] NF_HOOK.constprop.0+0xf8/0x138
[ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68
[ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168
[ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2
[ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d
[ 54.938135] NF_HOOK.constprop.0+0xf8/0x138
[ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68
[ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d
[ 54.939904] ? ip_local_deliver_finish+0x120/0x120
[ 54.940497] __netif_receive_skb_one_core+0xc9/0x107
[ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2
[ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9
[ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38
[ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b
[ 54.943618] process_backlog+0xb3/0x187
[ 54.944102] __napi_poll.constprop.0+0x57/0x1a7
[ 54.944669] net_rx_action+0x1cb/0x380
[ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7
[ 54.945744] ? vring_new_virtqueue+0x17a/0x17a
[ 54.946300] ? note_interrupt+0x2cd/0x367
[ 54.946805] handle_softirqs+0x13c/0x2c9
[ 54.947300] do_softirq+0x5f/0x7d
[ 54.947727] </IRQ>
[ 54.948014] <TASK>
[ 54.948300] __local_bh_enable_ip+0x48/0x62
[ 54.948832] __neigh_event_send+0x3fd/0x4ca
[ 54.949361] neigh_resolve_output+0x1e/0x210
[ 54.949896] ip_finish_output2+0x4bf/0x4f0
[ 54.950410] ? __ip_finish_output+0x171/0x1b8
[ 54.950956] ip_send_skb+0x25/0x57
[ 54.951390] raw_sendmsg+0xf95/0x10c0
[ 54.951850] ? check_new_pages+0x45/0x71
[ 54.952343] ? raw_hash_sk+0x21b/0x21b
[ 54.952815] ? kernel_init_pages+0x42/0x51
[ 54.953337] ? prep_new_page+0x44/0x51
[ 54.953811] ? get_page_from_freelist+0x72b/0x915
[ 54.954390] ? signal_pending_state+0x77/0x77
[ 54.954936] ? preempt_count_sub+0x14/0xb3
[ 54.955450] ? __might_resched+0x8a/0x240
[ 54.955951] ? __might_sleep+0x25/0xa0
[ 54.956424] ? first_zones_zonelist+0x2c/0x43
[ 54.956977] ? __rcu_read_lock+0x2d/0x3a
[ 54.957476] ? __pte_offset_map+0x32/0xa4
[ 54.957980] ? __might_resched+0x8a/0x240
[ 54.958483] ? __might_sleep+0x25/0xa0
[ 54.958963] ? inet_send_prepare+0x54/0x54
[ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c
[ 54.960000] sock_sendmsg_nosec+0x42/0x6c
[ 54.960502] __sys_sendto+0x15d/0x1cc
[ 54.960966] ? __x64_sys_getpeername+0x44/0x44
[ 54.961522] ? __handle_mm_fault+0x679/0xae4
[ 54.962068] ? find_vma+0x6b/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: llcc: Handle a second device without data corruption
Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it. |
