| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain an uninitialized heap read in the SquashFS archive handler caused by a sparsely populated index array. In the SquashFS handler, _blockToNode is allocated with capacity for every metadata block but populated only when an inode crosses a block boundary, so a crafted image with few inodes spanning many blocks leaves most slots holding raw heap contents (the underlying allocator does not zero-initialize POD storage). When OpenDir looks up an attacker-influenced blockIndex (derived from the RootInode superblock field), it reads two of these uninitialized slots and passes them as the left/right bounds of a binary search over _nodesPos, which dereferences the midpoint without bounds checking; if the resulting value happens to match the search key, the returned index is used to read a full node struct from _nodes whose fields feed further directory parsing, forming a chained OOB read primitive that is heap-layout-dependent and not reliably triggerable. The SquashFS handler is enabled by default in stock 7z.dll and the issue triggers during Open() with no interaction beyond opening the file; impact is denial of service from wild-pointer dereference and potential heap information disclosure, with no write primitive. Version 26.01 fixes the issue. |
| Use after free in PDFium in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to potentially exploit heap corruption via a crafted PDF file. (Chromium security severity: Low) |
| Use after free in PDFium in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted PDF file. (Chromium security severity: Low) |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain a heap out-of-bounds read in 7-Zip Ar handler BSD SYMDEF parser. A 4-byte heap out-of-bounds read exists in the Unix ar archive parser in 7-Zip. When parsing a BSD-style __.SYMDEF symbol table, the ParseLibSymbols function reads a 32-bit namesSize field via Get32 at a position that can equal the buffer size, reading 4 bytes past the end of the heap allocation. This reads uninitialized heap data under the default allocator. Version 26.01 patches the issue. |
| Incorrect access control in the web management interface of T3 Technology CPE models T625Pro v1.0.07, T6825G v1.0.03, and T7281 v1.0.03 allows unauthorized attackers to enable the Telnet service via sending a crafted request to a vulnerable CGI component. |
| When Routinator encounters a file via RRDP using a specifically crafted Document Type Definition, Routinator crashes. |
| AdGuard Home, when started with the --glinet flag, contains an authentication bypass vulnerability that allows unauthenticated attackers to gain full admin access by supplying a path traversal sequence in the Admin-Token cookie, exploiting unsanitized string concatenation in the token file path construction within the authglinet middleware. Attackers can craft a request with a traversal payload in the Admin-Token header to redirect file reads to arbitrary paths. |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.34 through 26.00 contain an off-by-one heap out-of-bounds read in the WIM (Windows Imaging) archive handler's security descriptor lookup. In CHandler::GetSecurity (CPP/7zip/Archive/Wim/WimHandler.cpp), the per-image SecurOffsets table holds numEntries + 1 cumulative offsets, but the check securityId >= SecurOffsets.Size() admits securityId == numEntries, and the function then reads SecurOffsets[securityId + 1], fetching one UInt32 past the end of the heap-allocated CRecordVector (which performs no bounds checking on operator[]). The securityId is attacker-controlled at offset +0xC of any directory entry in WIM metadata, and the handler is registered for .wim, .swm, .esd, and .ppkg and enabled by default in stock 7z.dll; the OOB triggers zero-click in the GUI because 7zFM.exe's ListView calls GetRawProp(kpidNtSecure) for every item during listing (ASan-confirmed), and is also reachable via CLI listing with 7zz l -slt. Impact is limited to denial of service under hardened allocators and minor information disclosure, since the OOB value is only consumed arithmetically as a length and is not surfaced to the attacker; there is no write primitive. |
| A weakness has been identified in imvks786 student_management_system up to 9599b560ad3c3b83e75d328b76bedcd489ef1f46. Affected is an unknown function of the file /add.php of the component Student Record Handler. Executing a manipulation can lead to improper access controls. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| OpenBullet2 through version 0.3.2 contains an authentication bypass vulnerability in the API key authentication middleware that allows unauthenticated attackers to gain admin access by supplying an empty X-Api-Key header value. Attackers can exploit the middleware's comparison of the supplied header against an empty AdminApiKey default string to access the admin console and all API endpoints without valid credentials. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.74.2 to before version 1.83.7, two endpoints used to preview an MCP server before saving it — POST /mcp-rest/test/connection and POST /mcp-rest/test/tools/list — accepted a full server configuration in the request body, including the command, args, and env fields used by the stdio transport. When called with a stdio configuration, the endpoints attempted to connect, which spawned the supplied command as a subprocess on the proxy host with the privileges of the proxy process. The endpoints were gated only by a valid proxy API key, with no role check. Any authenticated user — including holders of low-privilege internal-user keys — could therefore run arbitrary commands on the host. This issue has been patched in version 1.83.7. |
| In the Linux kernel, the following vulnerability has been resolved:
io-wq: check that the predecessor is hashed in io_wq_remove_pending()
io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled
work was the tail of its hash bucket. When doing this, it checks whether
the preceding entry in acct->work_list has the same hash value, but
never checks that the predecessor is hashed at all. io_get_work_hash()
is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash
bits are never set for non-hashed work, so it returns 0. Thus, when a
hashed bucket-0 work is cancelled while a non-hashed work is its list
predecessor, the check spuriously passes and a pointer to the non-hashed
io_kiocb is stored in wq->hash_tail[0].
Because non-hashed work is dequeued via the fast path in
io_get_next_work(), which never touches hash_tail[], the stale pointer
is never cleared. Therefore, after the non-hashed io_kiocb completes and
is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The
io_wq is per-task (tctx->io_wq) and survives ring open/close, so the
dangling pointer persists for the lifetime of the task; the next hashed
bucket-0 enqueue dereferences it in io_wq_insert_work() and
wq_list_add_after() writes through freed memory.
Add the missing io_wq_is_hashed() check so a non-hashed predecessor
never inherits a hash_tail[] slot. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, evaluation create and update mass-assignment allows cross-workspace evaluation takeover. This issue has been patched in version 3.1.2. |
| A vulnerability was identified in D-Link DGS-1100-08PD 1.00.006. This issue affects some unknown processing of the file /etc/boa.conf of the component Web Interface. Such manipulation leads to least privilege violation. The attack may be launched remotely. The attack requires a high level of complexity. The exploitability is assessed as difficult. The exploit is publicly available and might be used. |
| Inappropriate implementation in Extensions in Google Chrome prior to 149.0.7827.53 allowed an attacker who convinced a user to install a malicious extension to perform privilege escalation via a crafted Chrome Extension. (Chromium security severity: Low) |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.21 through 26.00 contain an off-by-one out-of-bounds read vulnerability in the ParseDepedencyExpression function of the UEFI firmware image parser(CPP/7zip/Archive/UefiHandler.cpp). The function validates an attacker-controlled opcode byte using > instead of >= against the element count of the 10-entry kExpressionCommands static array, allowing an opcode value of 10 to read one pointer slot (8 bytes on x64) past the end of the array in .rodata. The out-of-bounds value is then dereferenced as a const char * and passed through strlen and memcpy into the archive's Characts property, which may cause either a denial of service (access violation when the adjacent bytes do not form a valid readable pointer) or a minor information disclosure of an adjacent .rdata string literal into archive metadata. The vulnerability is reached automatically during IInArchive::Open() via the call path OpenFv/OpenCapsule → ParseVolume → ParseSections when processing a SECTION_DXE_DEPEX (0x13) or SECTION_PEI_DEPEX (0x1B) section whose first body byte is 0x0A, and the UEFI handler is enabled by default in stock 7z.dll with signature-based detection for both UEFIc and UEFIf formats. The outcome (crash vs. silent leak) is deterministic per build but linker-layout dependent, with no write primitive and no disclosure of heap data, secrets, or ASLR base addresses. Version 26.01 fixes the issue. |
| A vulnerability was identified in imvks786 student_management_system up to 9599b560ad3c3b83e75d328b76bedcd489ef1f46. This affects an unknown function of the file /index.ph of the component Login. Such manipulation of the argument usr/pwd leads to sql injection. The attack can be executed remotely. The exploit is publicly available and might be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| T3 Technology CPE models T625Pro v1.0.07, T6825G v1.0.03, and T7281 v1.0.03 were discovered to contain a hardcoded password for root access under the "superadmin" account. |
| When the director sends a long-running request (e.g. compile_package), the agent's reply JSON is consumed by AgentClient. inject_compile_log (line 332-339) reads response['value']['result']['compile_log_id'] and format_exception (line 318-325) reads exception['blobstore_id']; both pass the agent-supplied string unmodified to download_and_delete_blob(blob_id) (line 344-349), which calls @resource_manager.get_resource(blob_id) and, in an ensure block, @resource_manager.delete_resource(blob_id). Api::ResourceManager forwards the id straight to blobstore.get(id) / blobstore.delete(id). When the director is configured with the local blobstore provider, Blobstore::LocalClient#object_file_path(oid) is File.join(@blobstore_path, oid) (local_client.rb:54-56) with no normalisation, so oid = "../../jobs/director/config/director.yml" resolves outside the blobstore root.
Affected versions:
BOSH Director: All versions prior to v282.1.12 |
| AgentClient#handle_method (lines 264-303) processes every NATS reply. It calls inject_compile_log (line 273) on every response, which reads response['value']['result']['compile_log_id'] (line 332-338) and passes it to download_and_delete_blob. Separately, any response containing 'exception' goes through format_exception (lines 308-325), which reads exception['blobstore_id'] and also calls download_and_delete_blob. That helper (lines 344-349) calls ResourceManager#get_resource(blob_id) and, in an ensure block, ResourceManager#delete_resource(blob_id). ResourceManager (resource_manager.rb:62-70) calls blobstore.delete(id) on the single shared Director blobstore with no UUID-format check, no ownership check, and no namespace prefix.
Affected versions:
BOSH Director: All versions prior to v282.1.12 |
