| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fwctl: pds: Validate RPC input size before parsing
The fwctl core allocates the device-specific RPC input buffer with
fwctl_rpc.in_len and passes that buffer to the driver callback.
pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls
pdsfc_validate_rpc(), which reads fields from that structure before
checking that the input buffer is large enough to contain it. A short
in_len can make pds_fwctl read beyond the allocation.
Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before
parsing any pds-specific fields. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown
The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is
responsible for releasing the tp_vars reference it holds. However, the
existing logic for coordinating this release with batadv_tp_stop_all() was
flawed.
timer_shutdown_sync() guarantees the timer will not fire again after it
returns, but it returns non-zero only when the timer was pending at the
time of the call. If the timer had already expired (and
batadv_tp_stop_all() would unsucessfully try to rearm itself),
batadv_tp_stop_all() skips its batadv_tp_vars_put(), and
batadv_tp_receiver_shutdown() fails to put its own reference as well.
Fix this by introducing a new atomic variable receiving that is set to 1
when the receiver is initialized and cleared atomically with atomic_xchg()
by whichever side claims it first. Only the side that observes the
transition from 1 to 0 is responsible for releasing the tp_vars timer
reference, eliminating the uncertainty. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix TOCTOU race for reported vlans
The local TT based TVLV is generated by first checking the number of VLANs
which have at least one TT entry. A new buffer with the correct size for
the VLANs is then allocated. Only then, the list of VLANs s used to fill
the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock
is held. But the actual number of TT entries of each VLAN can still
increase during this time - just not the number of VLANs in the list.
But the prefilter used in the buffer size calculation might still cause an
increase of the number of VLANs which need to be stored. Simply because a
VLAN might now suddenly have at least one entry when it had none in the
pre-alloc check - and then needs to occupy space which was not allocated.
It is better to overestimate the buffer size at the beginning and then fill
the buffer only with the VLANs which are not empty. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: avoid empty VLAN responses
The commit 16116dac2339 ("batman-adv: prevent TT request storms by not
sending inconsistent TT TLVLs") added checks to the local (direct) TT
response code. But the response can also be done indirectly by another node
using the global TT state. To avoid such inconsistency states reported in
the original fix, also avoid sending empty VLANs for replies from the
global TT state. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix negative last_changeset_len
batadv_piv_tt::last_changeset_len len was declared as s16, but the field is
never intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_my_tt_response(), last_changeset_len is temporarily widened
to s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_my_tt_response(). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix negative tt_buff_len
batadv_orig_node::tt_buff_len was declared as s16, but the field is never
intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to
s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_other_tt_response(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Make Safe-RET robust against interrupt injection
An attacker injecting interrupts while the Safe-RET mitigation executes
on machines affected by SRSO can neutralize the safe return sequence,
potentially leading to data leakage through speculative execution.
Fixup register state as if the Safe-RET sequence executed successfully
by "emulating" it, in a manner of speaking, and avoid executing a RET
instruction after returning from the interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: airoha: Prevent division by zero when clock frequency is zero
clk_get_rate() can return 0 when the clock provider is not properly
configured or the clock is unmanaged. The driver uses wdt_freq as a
divisor directly in airoha_wdt_probe() to compute max_timeout and in
airoha_wdt_get_timeleft() to compute the remaining time, which results
in a division by zero.
Add a check for wdt_freq == 0 in probe and return -EINVAL with
dev_err_probe() to prevent the division by zero and provide a
diagnostic message. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down(). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins()
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free.
Fix this by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy() |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent user-triggered null deref on QP create
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix crash in reset link replay
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
