| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Broken or Risky Cryptographic Algorithm, Use of Password Hash
With Insufficient Computational Effort, Use of Weak Hash, Use of a
One-Way Hash with a Predictable Salt vulnerabilities in Beta80 "Life 1st Identity Manager"
enable an attacker with access to
password hashes
to bruteforce user passwords or find a collision to ultimately while attempting to gain access to a target application that uses "Life 1st Identity Manager" as a service for authentication.
This issue affects Life 1st: 1.5.2.14234. |
| A vulnerability was found in Netis WF-2404 1.1.124EN. It has been rated as problematic. This issue affects some unknown processing of the file /еtc/passwd. The manipulation leads to use of weak hash. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Besu Native contains scripts and tooling that is used to build and package the native libraries used by the Ethereum client Hyperledger Besu. Besu 24.7.1 through 25.2.2, corresponding to besu-native versions 0.9.0 through 1.2.1, have a potential consensus bug for the precompiles ALTBN128_ADD (0x06), ALTBN128_MUL (0x07), and ALTBN128_PAIRING (0x08). These precompiles were reimplemented in besu-native using gnark-crypto's bn254 implementation, as the former implementation used a library which was no longer maintained and not sufficiently performant. The new gnark implementation was initially added in version 0.9.0 of besu-native but was not utilized by Besu until version 0.9.2 in Besu 24.7.1. The issue is that there are EC points which may be crafted which are in the correct subgroup but are not on the curve and the besu-native gnark implementation was relying on subgroup checks to perform point-on-curve checks as well. The version of gnark-crypto used at the time did not do this check when performing subgroup checks. The result is that it was possible for Besu to give an incorrect result and fall out of consensus when executing one of these precompiles against a specially crafted input point. Additionally, homogenous Besu-only networks can potentially enshrine invalid state which would be incorrect and difficult to process with patched versions of besu which handle these calls correctly. The underlying defect has been patched in besu-native release 1.3.0. The fixed version of Besu is version 25.3.0. As a workaround for versions of Besu with the problem, the native precompile for altbn128 may be disabled in favor of the pure-java implementation. The pure java implementation is significantly slower, but does not have this consensus issue. |
| Dpanel is a Docker visualization panel system which provides complete Docker management functions. The Dpanel service contains a hardcoded JWT secret in its default configuration, allowing attackers to generate valid JWT tokens and compromise the host machine. This security flaw allows attackers to analyze the source code, discover the embedded secret, and craft legitimate JWT tokens. By forging these tokens, an attacker can successfully bypass authentication mechanisms, impersonate privileged users, and gain unauthorized administrative access. Consequently, this enables full control over the host machine, potentially leading to severe consequences such as sensitive data exposure, unauthorized command execution, privilege escalation, or further lateral movement within the network environment. This issue is patched in version 1.6.1. A workaround for this vulnerability involves replacing the hardcoded secret with a securely generated value and load it from secure configuration storage. |
| An issue was discovered in Kaseya Rapid Fire Tools Network Detective through 2.0.16.0. A vulnerability exists in the EncryptionUtil class because symmetric encryption is implemented in a deterministic and non-randomized fashion. The method Encrypt(byte[] clearData) derives both the encryption key and the IV from a fixed, hardcoded input by using a static salt value. As a result, identical plaintext inputs always produce identical ciphertext outputs. This is true for both FIPS and non-FIPS generated passwords. In other words, there is a cryptographic implementation flaw in the password encryption mechanism. Although there are multiple encryption methods grouped under FIPS and non-FIPS classifications, the logic consistently results in predictable and reversible encrypted outputs due to the lack of per-operation randomness and encryption authentication. |
| A vulnerability in the cryptographic logic used by HPE Aruba Networking EdgeConnect SD-WAN Gateways could allow an authenticated remote attacker to gain shell access. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system, potentially leading to unauthorized access and control over the affected systems. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). The affected devices support the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite, which uses CBC (Cipher Block Chaining) mode that is known to be vulnerable to timing attacks. This could allow an attacker to compromise the integrity and confidentiality of encrypted communications. |
| Cyberduck and Mountain Duck improper handle TLS certificate pinning for untrusted certificates (e.g., self-signed), since the certificate fingerprint is stored as SHA-1, although SHA-1 is considered weak.
This issue affects Cyberduck: through 9.1.6; Mountain Duck: through 4.17.5. |
| The Copypress Rest API plugin for WordPress is vulnerable to Remote Code Execution via copyreap_handle_image() Function in versions 1.1 to 1.2. The plugin falls back to a hard-coded JWT signing key when no secret is defined and does not restrict which file types can be fetched and saved as attachments. As a result, unauthenticated attackers can forge a valid token to gain elevated privileges and upload an arbitrary file (e.g. a PHP script) through the image handler, leading to remote code execution. |
| jose v6.0.10 was discovered to contain weak encryption. NOTE: this is disputed by a third party because the claim of "do not meet recommended security standards" does not reflect guidance in a final publication. |
| jsrsasign v11.1.0 was discovered to contain weak encryption. NOTE: this issue has been disputed by a third party who believes that CVE IDs can be assigned for key lengths in specific applications that use a library, and should not be assigned to the default key lengths in a library. This dispute is subject to review under CNA rules 4.1.4, 4.1.14, and other rules; the dispute tagging is not meant to recommend an outcome for this CVE Record. |
| ruby-jwt v3.0.0.beta1 was discovered to contain weak encryption. NOTE: the Supplier's perspective is "keysize is not something that is enforced by this library. Currently more recent versions of OpenSSL are enforcing some key sizes and those restrictions apply to the users of this gem also." |
| Actualizer is a single shell script solution to allow developers and embedded engineers to create Debian operating systems (OS). Prior to version 1.2.0, Actualizer uses OpenSSL's "-passwd" function, which uses SHA512 instead of a more suitable password hasher like Yescript/Argon2i. All Actualizer users building a full Debian Operating System are affected. Users should upgrade to version 1.2.0 of Actualizer. Existing OS deployment requires manual password changes against the alpha and root accounts. The change will deploy's Debian's yescript overriding the older SHA512 hash created by OpenSSL. As a workaround, users need to reset both `root` and "Alpha" users' passwords. |
| The secret used for validating authentication tokens is hardcoded in
device firmware for affected versions. An attacker who obtains the
signing key can bypass authentication, gaining complete access to the
system. |
| An issue was discovered in Siklu Communications Etherhaul 8010TX and 1200FX devices, Firmware 7.4.0 through 10.7.3 and possibly other previous versions. The rfpiped service listening on TCP port 555 which uses static AES encryption keys hardcoded in the binary. These keys are identical across all devices, allowing attackers to craft encrypted packets that execute arbitrary commands without authentication. This is a failed patch for CVE-2017-7318. This issue may affect other Etherhaul series devices with shared firmware. |
| A cryptanalytic break in Altcha Proof-of-Work obfuscation mode version 0.8.0 and later allows for remote visitors to recover the Proof-of-Work nonce in constant time via mathematical deduction. NOTE: this is disputed by the Supplier because the product's objective is "to discourage automated scraping / bots, not guarantee resistance to determined attackers." The documentation states “the goal is not to provide a secure cryptographic algorithm but to use a proof-of-work mechanism that allows any capable device to decrypt the hidden data.” |
| Arcade MCP allows you to to create, deploy, and share MCP Servers. Prior to 1.5.4, the arcade-mcp HTTP server uses a hardcoded default worker secret ("dev") that is never validated or overridden during normal server startup. As a result, any unauthenticated attacker who knows this default key can forge valid JWTs and fully bypass the FastAPI authentication layer. This grants remote access to all worker endpoints—including tool enumeration and tool invocation—without credentials. This vulnerability is fixed in 1.5.4. |
| A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Bastion provides authentication, authorization, traceability and auditability for SSH accesses. Session-recording ttyrec files, may be handled by the provided osh-encrypt-rsync script that is a helper to rotate, encrypt, sign, copy, and optionally move them to a remote storage periodically, if configured to. When running, the script properly rotates and encrypts the files using the provided GPG key(s), but silently fails to sign them, even if asked to. |
| A private key disclosure vulnerability exists in ZTE's ZXMP M721 product. A low-privileged user can bypass authorization checks to view the device's communication private key, resulting in key exposure and impacting communication security. |
