| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| setuptools is a package that allows users to download, build, install, upgrade, and uninstall Python packages. Prior to 83.0.0, FileList applied MANIFEST.in exclude, global-exclude, recursive-exclude, and prune directives by matching compiled glob patterns against on-disk file names without Unicode normalization, so on macOS APFS or HFS+ an NFD file name could bypass an NFC exclusion rule and be packed into a source distribution. This issue is fixed in version 83.0.0. |
| DeepSeek MCP Server is an MCP server for DeepSeek V4. Starting in version 1.4.2 and prior to version 1.7.0, the process-global `SessionStore` accepts caller-supplied `session_id` values without binding them to any authenticated principal or transport session. An attacker can enumerate active session IDs via `deepseek_sessions`, then reuse a victim-controlled `session_id` in `deepseek_chat` to retrieve and continue the victim's conversation context. Version 1.7.0 contains a patch. |
| A Use of Multiple Resources with Duplicate Identifier vulnerability in the IKE daemon (iked) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
On an MX with SPC3 and SRX devices configured for VPN service, when a large number of VPN negotiations fail a peer index rollover will eventually occur. As a result, new peers are assigned index values that are already in use and the iked process starts to crash repeatedly. This results in failure to establish new VPN connections and rekeying existing ones. To restore service the system must be rebooted.
Please note that the index value can't be monitored, so customers should monitor tunnel up and down events and if a lot of events occur over an extended period of time it becomes likely that this issue occurs.
To be exposed to this issue the system needs to run iked (vs. kmd which is not affected), which can be verified with:
user@host> show system processes extensive | match "KMD|IKED"
This issue affects Junos OS on MX with SPC3, SRX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R1-S1. |
| Multiple protection mechanism failures in the Prisma Access Agent Data Loss Prevention (DLP) component for Windows allow a local user to bypass DLP policy enforcement controls.
The Prisma Access Agent on macOS is not affected. |
| EspoCRM 5.7.0 prior to 5.9.0 contains an authentication token reuse vulnerability that allows authenticated attackers to bypass two-factor authentication by exploiting token-to-password-hash mapping in application/Espo/Core/Utils/Authentication/Espo.php. Attackers can obtain an authentication token for a controlled account and replay it against any victim account sharing the same password, since tokens are bound to password hashes rather than unique per-user values, bypassing the victim's 2FA protections. |
| Uncontrolled Recursion, Uncontrolled Resource Consumption vulnerability in Apache IoTDB.
When pipe_air_gap_receiver_enabled=true, the IoTDB AirGap receiver's
readLength method calls itself recursively each time it recognises the
E-language prefix in socket data, with no depth limit. An unauthenticated
attacker can send a stream of repeated E-language prefixes that drives the
recursion arbitrarily deep, exhausting the receiver thread's JVM stack and
raising StackOverflowError.
This issue affects Apache IoTDB: from 1.0.0 before 2.0.10.
Users are recommended to upgrade to version 2.0.10, which fixes the issue. |
| When the upstream Guardian or CMC was configured in the Remote Collector via n2os-tui, the generated configuration disabled TLS certificate verification, and no option was provided to enable it. A malicious actor could perform a man-in-the-middle attack and intercept the communication between the Remote Collector and the Guardian or CMC. This could result in theft of the sync token, impersonation of the server, injection of spoofed data (such as false asset information or vulnerabilities) into the Guardian or CMC, or disruption of the data flow between the Remote Collector and the Guardian or CMC. |
| Authorization bypass through User-Controlled key vulnerability in PAVO Financial Technology Solutions Inc. PAVO Pay allows Exploitation of Trusted Identifiers.
This issue affects PAVO Pay: through 09072026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Pimcore is an Open Source Data & Experience Management Platform. Prior to 2025.4.6 and 2026.1.6, an unauthenticated attacker who knows a valid admin username can take over any Pimcore admin account by sending a password reset request with an attacker-controlled resetPasswordUrl. The server generates a real cryptographic recovery token, appends it to the supplied URL, and emails the link to the victim; when the victim clicks the link, the token is sent to the attacker and can be used with POST /pimcore-studio/api/login/token to authenticate with full admin privileges while bypassing two-factor authentication. This issue is fixed in versions 2025.4.6 and 2026.1.6. |
| An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage.
This issue only affects MX series FPCs up to and including MPC9. It does not affect MPC10/11, LC4800/9600 and MX304.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2. |
| Authorization bypass through User-Controlled key vulnerability in Idvlabs Software and Consulting Services Inc. Ontime allows Exploitation of Trusted Identifiers.
This issue affects Ontime: through 04052026. |
| Authorization bypass through User-Controlled key vulnerability in Idvlabs Software and Consulting Services Inc. Ontime allows Exploitation of Trusted Identifiers.
This issue affects Ontime: through 04052026. |
| A logic vulnerability was found in GStreamer's webrtcbin component. The _check_sdp_crypto() function contains an inverted boolean condition that causes it to accept remote SDP offers or answers that lack the required a=fingerprint attribute, while incorrectly rejecting those that include it. An attacker with the ability to intercept and modify WebRTC signaling messages could exploit this to bypass the SDP-level DTLS certificate fingerprint binding, weakening defenses against man-in-the-middle attacks on media streams. |
| Stanza is a Stanford NLP Python library for tokenization, sentence segmentation, NER, and parsing of many human languages. Prior to 1.12.2, Stanza model loaders such as stanza.models.common.pretrain.Pretrain.load() attempt torch.load(..., weights_only=True) but fall back to torch.load(..., weights_only=False) on attacker-controllable pickle.UnpicklingError, allowing a malicious .pt pretrain or model file to execute arbitrary pickle code when a Stanza NLP pipeline loads it. This issue is fixed in version 1.12.2. |
| The GamiPress – Gamification plugin to reward points, achievements, badges & ranks in WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 7.9.4 via the 'access' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to view private GamiPress activity log entries belonging to any user, including badge earnings, points balance changes, and event records from integrated plugins such as WooCommerce, LearnDash, and BuddyPress. This is exploitable by any unauthenticated visitor because the required 'gamipress' nonce is broadcast to all front-end users via wp_localize_script on the wp_enqueue_scripts hook, making the sole authentication barrier trivially bypassable. |
| The Hydra Booking – Appointment Scheduling & Booking Calendar plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 1.2.1 via the /wp-json/hydra-booking/v1/booking/details/{id} REST endpoint. This is due to the getBookingDetails() callback only enforcing the tfhb_manage_options capability via tfhb_manage_options_permission(), without verifying that the requested booking belongs to the currently authenticated host (the lookup in getBookingDetailsData() filters solely on the booking id supplied in the URL). This makes it possible for authenticated attackers, with Hydra Host-level access and above (a role created by the plugin which grants tfhb_manage_options), to view sensitive booking records belonging to other hosts, including attendee names, emails, phone numbers, addresses, meeting details, payment method and status, transaction history, and internal notes by iterating booking IDs. |
| CakePHP Authentication is an authentication plugin for CakePHP that can also be used in PSR-7 based applications. Prior to 2.11.1, 3.3.6, and 4.1.1, the getLoginRedirect() method contains a weakness to backslash bypasses that allows redirect targets with attacker-controlled hostnames through the redirect query string parameter. This issue is fixed in versions 2.11.1, 3.3.6, and 4.1.1. |
| The input file does not need to be strictly in a structurally valid PDF format. Instead, after reviewing the content, the original document disguised as a PDF will be sent to the parser. Malicious documents will construct malicious external entities that, through the protocol, point to local paths, thereby allowing access to any local files within the user's permission range. |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.18, tar.replace accepts a checksum-valid tar header with a negative base-256 encoded entry size, causing the archive scanner to make no progress while repeatedly parsing the same header. This issue is fixed in version 7.5.18. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.10, org.hl7.fhir.utilities.XsltUtilities saxonTransform(...) overloads instantiated a bare net.sf.saxon.TransformerFactoryImpl() without ACCESS_EXTERNAL_DTD or ACCESS_EXTERNAL_STYLESHEET restrictions, allowing an attacker who controls or can tamper with transformed XML to trigger XML External Entity injection for local file disclosure and blind XXE or SSRF to arbitrary URLs reachable from the host. This issue is fixed in version 6.9.10. |
