| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw versions prior to 2026.2.22 contain an allowlist bypass vulnerability in system.run exec analysis that fails to unwrap env and shell-dispatch wrapper chains. Attackers can route execution through wrapper binaries like env bash to smuggle payloads that satisfy allowlist entries while executing non-allowlisted commands. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codec: sma1307: Fix memory corruption in sma1307_setting_loaded()
The sma1307->set.header_size is how many integers are in the header
(there are 8 of them) but instead of allocating space of 8 integers
we allocate 8 bytes. This leads to memory corruption when we copy data
it on the next line:
memcpy(sma1307->set.header, data,
sma1307->set.header_size * sizeof(int));
Also since we're immediately copying over the memory in ->set.header,
there is no need to zero it in the allocator. Use devm_kmalloc_array()
to allocate the memory instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Fix memory corruption when using identity domain
zpci_get_iommu_ctrs() returns counter information to be reported as part
of device statistics; these counters are stored as part of the s390_domain.
The problem, however, is that the identity domain is not backed by an
s390_domain and so the conversion via to_s390_domain() yields a bad address
that is zero'd initially and read on-demand later via a sysfs read.
These counters aren't necessary for the identity domain; just return NULL
in this case.
This issue was discovered via KASAN with reports that look like:
BUG: KASAN: global-out-of-bounds in zpci_fmb_enable_device
when using the identity domain for a device on s390. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers. |
| A flaw was found in xorg-server. Querying or changing XKB button actions such as moving from a touchpad to a mouse can result in out-of-bounds memory reads and writes. This may allow local privilege escalation or possible remote code execution in cases where X11 forwarding is involved. |
| Glances is an open-source system cross-platform monitoring tool. The Glances action system allows administrators to configure shell commands that execute when monitoring thresholds are exceeded. These commands support Mustache template variables (e.g., `{{name}}`, `{{key}}`) that are populated with runtime monitoring data. The `secure_popen()` function, which executes these commands, implements its own pipe, redirect, and chain operator handling by splitting the command string before passing each segment to `subprocess.Popen(shell=False)`. Prior to 4.5.2, when a Mustache-rendered value (such as a process name, filesystem mount point, or container name) contains pipe, redirect, or chain metacharacters, the rendered command is split in unintended ways, allowing an attacker who controls a process name or container name to inject arbitrary commands. Version 4.5.2 fixes the issue. |
| An out‑of‑bounds write vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out‑of‑bounds write, potentially leading to code execution. |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.3, a command injection vulnerability exists in the `/config/compare/<service>/<server_ip>/show` endpoint, allowed authenticated users to execute arbitrary system commands on the app host. The vulnerability exists in `app/modules/config/config.py` on line 362, where user input is directly formatted in the template string that is eventually executed. Version 8.2.6.3 fixes the issue. |
| A command injection vulnerability exists in the web management interface of the WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02). The adm.cgi endpoint improperly sanitizes user-supplied input provided to a command-related parameter in the sysCMD functionality. |
| Buffer Overflow vulnerability in giflib v.5.2.2 allows a remote attacker to cause a denial of service via the EGifGCBToExtension overwriting an existing Graphic Control Extension block without validating its allocated size. |
| xiaoheiFS is a self-hosted financial and operational system for cloud service businesses. In versions up to and including 0.3.15, the standard plugin system allows admins to upload a ZIP file containing a binary and a `manifest.json`. The server trusts the `binaries` field in the manifest and executes the specified file without any validation of its contents or behavior, leading to Remote Code Execution (RCE). Version 0.4.0 fixes the issue. |
| A security flaw has been discovered in Tenda AC8 16.03.50.11. This affects the function route_set_user_policy_rule of the file /cgi-bin/UploadCfg of the component Web Interface. The manipulation of the argument wans.policy.list1 results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. |
| A weakness has been identified in Tenda AC8 up to 16.03.50.11. This vulnerability affects the function doSystemCmd of the file /goform/SysToolChangePwd of the component HTTP Endpoint. This manipulation of the argument local_2c causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| Perle IOLAN STS/SCS terminal server models with firmware versions prior to 6.0 allow authenticated OS command injection via the restricted shell accessed over Telnet or SSH. The shell 'ps' command does not perform proper argument sanitization and passes user-supplied parameters into an 'sh -c' invocation running as root. An authenticated attacker who can log in to the device can inject shell metacharacters after the 'ps' subcommand to execute arbitrary OS commands with root privileges, leading to full compromise of the underlying operating system. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue. |
| A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. |
| in OpenHarmony v5.1.0 and prior versions allow a local attacker arbitrary code execution in pre-installed apps through out-of-bounds write. This vulnerability can be exploited only in restricted scenarios. |
| in OpenHarmony v5.1.0 and prior versions allow a local attacker arbitrary code execution in pre-installed apps through out-of-bounds write. This vulnerability can be exploited only in restricted scenarios. |
| A weakness has been identified in LB-LINK BL-WR9000 2.4.9. The affected element is the function sub_44E8D0 of the file /goform/get_virtual_cfg. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to bound memory allocation when processing DOC files which allows an authenticated attacker to cause server memory exhaustion and denial of service via uploading a specially crafted DOC file.. Mattermost Advisory ID: MMSA-2026-00581 |
