| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: validate rx_req_idx to prevent out-of-bounds array access
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: pop cached request if it is usable
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable reconnect error path file lifetime
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path. |
| In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix use-after-free in llcp_sock_release()
llcp_sock_release() unconditionally unlinks the socket from the local
sockets list. However, if the socket is still in connecting state, it
is on the connecting list.
Fix this by checking the socket state and unlinking from the correct list. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()
A race condition exists in the NFC LLCP connection state machine where
the connection acceptance packet (CC) can be processed concurrently with
socket release. This can lead to a use-after-free of the socket object.
When nfc_llcp_recv_cc() moves the socket from the connecting_sockets
list to the sockets list, it does so without holding the socket lock.
If llcp_sock_release() is executing concurrently, it might have already
unlinked the socket and dropped its references, which can result in
nfc_llcp_recv_cc() linking a freed socket into the live list.
Fix this by holding lock_sock() during the state transition and list
movement in nfc_llcp_recv_cc(). After acquiring the lock, check if
the socket is still hashed to ensure it hasn't already been unlinked
and marked for destruction by the release path. This aligns the locking
pattern with recv_hdlc() and recv_disc(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Check for underflow in xfrm_state_mtu
Leo Lin reported OOB write issue in esp component:
xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned
modulo-2^32 space using an attacker-influenced "header_len + authsize +
net_adj" subtracted from a small "mtu" argument. A nobody user can
install an IPv4 ESP tunnel SA with a large authentication key
(XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc),
configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a
large value. When a single UDP datagram is then sent through the
tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and
esp_output() consumes it as a signed int via:
padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached))
esp.tfclen = padto - skb->len (assigned to int)
esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t
when passed to memset() inside esp_output_fill_trailer(), producing a
~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as
"Write of size 18446744073709551537 at addr ffff888...".
Check for underflow and return 1. This causes the sendmsg attempt to
fail with ENETUNREACH. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix UAF via dangling GEM handle in create_bo
rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via
drm_gem_handle_create() early on, then performs several operations that
can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after
the handle is live, the error path calls drm_gem_shmem_object_free()
which kfree's the object without removing the handle from the IDR.
This leaves a dangling handle pointing to freed slab memory. Any
subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls
drm_gem_object_lookup() and dereferences freed memory (UAF).
Fix by moving drm_gem_handle_create() to after all fallible operations
succeed, matching the pattern used by panfrost, lima, and etnaviv.
Also fix drm_mm_insert_node_generic() whose return value was silently
overwritten by iommu_map_sgtable() on the next line. Add the missing
error check.
[tomeu: Move handle creation to the very end] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Do not re-initialize smc hashtables
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix locking in .getsockopt
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not
set the requeue list for a requeued command to be kicked in the future.
The expectation is a call to scsi_run_host_queues() will kick all SCSI
devices once the recovery state is cleared.
However, scsi_run_host_queues() uses shost_for_each_device() which uses
scsi_device_get() and so will ignore devices in a partially removed
state like SDEV_CANCEL. But these devices may also have requeued
requests, leaving their requests stuck from not being kicked and causing
the removal process of the device to hang.
scsi_run_host_queues() needs to run against more devices than the macro
shost_for_each_device() allows. Instead of using the too limiting
scsi_device_get() state checks, only ignore devices in SDEV_DEL state or
when unable to acquire a reference. Attempt to run the queues for all
other devices when scsi_run_host_queues() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix potential OOB access in supervision frame handling
Ensure the entire TLV header is linearized before access by adding
sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,
a truncated frame could cause an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: require exact CDB reply length
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: validate start_cmd_payload_size from module
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
skb_tunnel_check_pmtu() can change skb->head.
Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF.
Use instead ip_hdr(skb) as done in drivers/net/bareudp.c
and drivers/net/geneve.c.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: do not assume transport header in iptunnel_pmtud_check_icmp()
In some cases, iptunnel_pmtud_check_icmp() can be called while
skb transport header is not set.
This triggers an out-of-bound access, because
(typeof(skb->transport_header))~0U is 65535.
Access the icmp header based on IPv4 network header,
after making sure icmp->type is present in skb linear part.
Note that iptunnel_pmtud_check_icmpv6()) is fine. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries). |
