| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session. |
| http-proxy-middleware is node.js http-proxy middleware. From 3.0.4 until 3.0.7 and 4.1.1, fixRequestBody() is the library's documented helper for re-emitting a request body that was already consumed by a body parser. When the outgoing Content-Type is multipart/form-data, it rebuilds the body with handlerFormDataBodyData(), which interpolates each req.body key and value directly into the multipart wire format without neutralizing CR/LF. A \r\n inside a value (or key) lets an attacker close the current part and inject an entirely new form part. Because the proxy's own body parser saw a single opaque value, any gateway-side policy or validation performed on req.body is evaluated against a different set of fields than the upstream backend ultimately parses a request/parameter desynchronization across the trust boundary. This vulnerability is fixed in 3.0.7 and 4.1.1. |
| A missing length validation in the Zephyr Bluetooth Host ISO receive path can be triggered by malformed HCI ISO data. In bt_iso_recv() (subsys/bluetooth/host/iso.c), when processing PB=START/SINGLE fragments, the code pulls a TS SDU header (8 bytes, ts=1) or a non-TS SDU header (4 bytes, ts=0) without first verifying that buf->len contains at least that many bytes. The outer HCI ISO length check in hci_iso() validates payload length consistency but not the minimum inner SDU header size, so a packet with payload length 1 passes hci_iso() and then reaches net_buf_pull_mem(), which asserts buf->len >= len. As a result, malformed ISO traffic deterministically triggers a kernel assert (denial of service) in assert-enabled builds, and in non-assert builds the same path may proceed with an undersized buffer, leading to out-of-bounds read behavior. The issue affects products using the Zephyr Host with CONFIG_BT_ISO_RX enabled, particularly where incoming HCI data can be influenced by a malicious or compromised controller or malformed forwarded ISO traffic. |
| A malformed Bluetooth Classic SDP attribute can trigger a reachable assertion in Zephyr's SDP parser. In subsys/bluetooth/host/classic/sdp.c, bt_sdp_parse_attribute() accepts an input buffer once it contains the 1-byte attribute type and 2-byte attribute id, but then unconditionally pulls an additional byte for the value type without verifying that the byte is present. A truncated 3-byte attribute (for example 09 00 09) therefore reaches net_buf_simple_pull() with insufficient remaining length, triggering the __ASSERT_NO_MSG(buf->len >= len) check and a kernel panic in assert-enabled builds (denial of service). In builds where assertions are disabled, parsing may continue past the end of the available buffer, leading to an out-of-bounds read and undefined behavior. |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.23.1rc0, vLLM's /v1/audio/transcriptions endpoint limits compressed upload size but not decoded PCM output. A 25MB OPUS file expands to ~14.9GB of float32 PCM at decode time. This vulnerability is fixed in 0.23.1rc0. |
| Jupyter Server is the backend for Jupyter web applications. Prior to 2.20, the nbconvert HTTP handlers in jupyter_server render user-authored notebook HTML under the Jupyter origin without a sandbox directive in their Content-Security-Policy. Combined with nbconvert.HTMLExporter's default non-sanitizing behavior, a notebook carrying an HTML payload in a display_data output triggers stored XSS with cookie access, full /api/* authority, and kernel RCE. This vulnerability is fixed in 2.20. |
| In ManageEngine ADSelfService Plus, RecoveryManager Plus, M365 Manager Plus, and ADAudit Plus, the SSO tickets generated to authenticate that session could be predicted
by an unauthenticated user, leading to account takeover. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 3.0.0 until 3.3.53, a disabled RichEditor field rendered its raw state without sanitizing HTML. Where the data stored in this field's state isn't sanitized already when the form state was filled, an attacker could plant malicious HTML or JavaScript and achieve XSS that executes for users who view the form. This vulnerability is fixed in 3.3.53. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, A vulnerability exists in the optional LZ4 decompression path used by MessagePack compression modes Lz4Block and Lz4BlockArray. The decoder implementation is based on a deprecated fast-decompression algorithm that does not take a source-length bound. A remote attacker can send a crafted MessagePack payload with manipulated LZ4 token/length fields to force out-of-bounds reads from the compressed input buffer. In affected environments, this can trigger an AccessViolationException during decompression, causing process termination (denial of service). Under some conditions, limited unintended memory disclosure from over-read data may also be possible before failure. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.TrySkip() recursively descends into nested arrays and maps without incrementing the reader depth or calling the configured depth checks. This bypasses MessagePackSecurity.MaximumObjectGraphDepth, the library's documented protection against deeply nested object graphs. Many generated and dynamic formatters call reader.Skip() when they encounter unknown map keys, unknown array members, ignored fields, or data that should be skipped for forward compatibility. A deeply nested value in one of these skipped positions can therefore cause unbounded recursion and an uncatchable StackOverflowException. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, UnsafeBlitFormatterBase<T>.Deserialize reads an attacker-controlled byteLength from an extension payload and allocates an array based on that value before validating it against the extension header length or remaining payload bytes. The outer extension header is bounded by available input, but that bound is not used to constrain the inner byteLength before allocation. A very small payload can therefore request a very large T[] allocation. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a memory leak in coders/txt.c when processing TXT files with texture attributes: the texture object allocated via ReadImage is not released when GetTypeMetrics fails, leaking memory each time a crafted TXT file with a texture attribute is processed. |
| Crawl4AI before 0.8.7 contains a stored cross-site scripting vulnerability in the monitor dashboard that renders crawl URLs and error messages via innerHTML without escaping. An attacker can submit a crafted crawl request with malicious markup that executes in an operator's browser when viewing the dashboard. |
| Capgo before 12.128.2 contains an authorization bypass vulnerability in POST /private/role_bindings that fails to verify app_id ownership during app-scoped role binding creation. An attacker with administrative privileges in one organization can create role bindings targeting applications owned by other organizations, enabling unauthorized read and modification of victim applications. |
| Traefik before 2.10.5 and 3.0.0-beta4 is affected by a denial-of-service vulnerability in HTTP/2 request handling inherited from the Go standard library's HTTP/2 implementation (CVE-2023-44487 / CVE-2023-39325, the 'Rapid Reset' technique). A remote attacker can rapidly create and cancel HTTP/2 streams to exhaust server resources and cause service unavailability. |
| Nuxt versions 4.0.0 before 4.4.7 and 3.x before 3.21.7 contain a server-side open redirect vulnerability in navigateTo that fails to properly validate path-normalized payloads like /..//evil.com and /.//evil.com. Attackers can bypass external-host checks using path-normalization techniques to redirect users to attacker-controlled sites via the Location header or meta-refresh, enabling phishing and OAuth authorization-code theft. |
| A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service. |
| Capgo before 12.128.2 contains a weak parsing vulnerability in the x-limited-key-id header that allows attackers to bypass subkey enforcement by submitting malformed values, zero, or duplicate headers that result in NaN or falsy values. Remote attackers can manipulate the x-limited-key-id header to disable limited key scoping and execute requests using the main API key context instead of restricted subkey permissions. |
| picklescan before 0.0.29 fails to detect malicious pickle files that exploit idlelib.autocomplete.AutoComplete.get_entity function in reduce methods. Attackers can embed undetected code in pickle files that executes arbitrary commands when loaded by victims using pickle.load(). |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.1, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with threads/articles into a writer. This vulnerability is fixed in 6.13.1. |
