| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: thead: Fix buffer overflow and use standard endian macros
Addresses two issues in the TH1520 AON firmware protocol driver:
1. Fix a potential buffer overflow where the code used unsafe pointer
arithmetic to access the 'mode' field through the 'resource' pointer
with an offset. This was flagged by Smatch static checker as:
"buffer overflow 'data' 2 <= 3"
2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard
kernel endianness conversion macros (cpu_to_be16, etc.) for better
portability and maintainability.
The functionality was re-tested with the GPU power-up sequence,
confirming the GPU powers up correctly and the driver probes
successfully.
[ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6645434 OS)
[ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on
minor 0 |
| Memory corruption when dynamically changing the size of a previously allocated buffer while its contents are being modified. |
| Memory corruption while processing IOCTL command when device is in power-save state. |
| Stack-based buffer overflow in .NET and Visual Studio allows an unauthorized attacker to deny service over a network. |
| The rtl8192cd Wi-Fi kernel driver in the Realtek rtl819x Jungle SDK (all known versions through v3.4.14B) does not perform any access control checks on the write_mem (ioctl 0x89F5) and read_mem (ioctl 0x89F6) debug handlers, which are compiled into production builds via the unconditionally defined _IOCTL_DEBUG_CMD_ macro in 8192cd_cfg.h |
| The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to enforce the caller-supplied buffer length, and can result in an out-of-bounds write when printing TSIG records. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==============================================================
---truncated--- |
| RDP protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service and possible code execution |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip4ip6_err()
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5). |
| A vulnerability was detected in AcademySoftwareFoundation OpenImageIO up to 3.2.0.1-dev. This vulnerability affects unknown code of the file src/dds.imageio/ddsinput.cpp of the component DDS Image Handler. The manipulation results in out-of-bounds write. The attack needs to be approached locally. The exploit is now public and may be used. The patch is identified as 94ec2deec3e3bf2f2e2ff84d008e27425d626fe2. Applying a patch is advised to resolve this issue. |
| A vulnerability in the OSPF protocol of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to corrupt memory on an affected device, resulting in a denial of service (DoS) condition.
This vulnerability is due to memory corruption when parsing OSPF protocol packets. An attacker could exploit this vulnerability by sending crafted OSPF packets to an affected device. A successful exploit could allow the attacker to cause memory corruption causing the affected device to reboot, resulting in a DoS condition. |
| Insufficient validation of the prefix length field in IPv6 Router Advertisement processing in FreeRTOS-Plus-TCP before V4.2.6 and V4.4.1 allows an adjacent network actor to cause memory corruption by sending a crafted Router Advertisement with a prefix length value exceeding the maximum valid length, resulting in a heap buffer overflow. Users processing IPv4 RA only are not impacted.
To mitigate this issue, users should upgrade to the fixed version when available. |
| A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer. |
| A heap-based buffer overflow in hex_to_binary in the PKZIP hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted PKZIP hash file. The issue affects modules 17200, 17210, 17220, 17225, and 17230. When data_type_enum<=1, attacker-controlled hex data from a user-supplied hash string is decoded into a fixed-size buffer without proper input-length validation. |
| In Exim before 4.99.2, when JSON lookup is enabled, an out-of-bounds heap write can occur when a JSON operator encounters malformed JSON in an untrusted header, because of an incorrect implementation of \ skipping. |
| SBC codec crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service and possible code execution |
| A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal. |
| NSauditor 3.1.2.0 contains a buffer overflow vulnerability in the SNMP Auditor Community field that allows local attackers to crash the application by supplying an excessively long string. Attackers can paste a large payload into the Community field and trigger the Walk function to cause a denial of service condition. |
| Nsauditor 3.0.28.0 contains a structured exception handling buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying malicious input to the DNS Lookup tool. Attackers can craft a payload with SEH chain overwrite and inject shellcode through the DNS Query field to achieve code execution with application privileges. |
