| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: reject firmware images without a ':' record header
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL. |
| The Tenda TX9 V22.03.02.05 firmware has a stack overflow vulnerability in the sub_4418CC function of the file /goform/SetNetControlList. |
| SolarWinds Serv-U is affected by a privilege escalation vulnerability that allows a domain administrator to escalate their user type to that of a system administrator. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by a privilege escalation vulnerability. This would elevate a group’s access to system administrator and allow code execution as root. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to SMTP hijacking leading to arbitrary account takeover. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by an insecure direct object reference vulnerability that leads to an account takeover. User authentication is required. The impact is lower in Windows deployments. |
| PraisonAI is a multi-agent teams system. CVE-2026-44338 (GHSA-6rmh-7xcm-cpxj) documents that PraisonAI ships a code-generator (`praisonai.deploy.api.generate_api_server_code`) that emits a Flask API server with authentication disabled by default. Users who follow the documented quickstart (`praisonai deploy --type api`) get a server that binds to `0.0.0.0` per the recommended sample YAML, exposes `/chat` and `/agents` endpoints, runs `praisonai.run()` on user-supplied JSON input — LLM orchestration with the API key materials present in the process environment, and does not require any authentication. Versions prior to 4.6.40 still ship the generator with `auth_enabled` defaulting to `False`. The fix shape is opt-in via `APIConfig(auth_enabled=True, auth_token=...)`. Version 4.6.40 fixes the issue. |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to privilege escalation. This issue requires domain administrator access. The impact is lower in Windows deployments. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.40, PraisonAI's call server exposes a network-facing agent control API without authentication when `CALL_SERVER_TOKEN` is not configured. The affected component is the `praisonai.api.agent_invoke` router as mounted by `praisonai.api.call`. The authentication helper `verify_token()` fails open when `CALL_SERVER_TOKEN` is unset. Since every sensitive agent-control endpoint depends on this helper, starting the call server without a token allows any reachable client to list agents, inspect agent metadata and instructions, invoke agents, and unregister agents. This is security-relevant because the bundled call server includes the vulnerable router and binds to `0.0.0.0`. As a result, operators who launch the call server without explicitly setting `CALL_SERVER_TOKEN` may unintentionally expose an unauthenticated remote agent control plane. Version 4.6.40 fixes the issue. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.40, hidden metadata in a webpage causes PraisonAI agents to write attacker-controlled content to arbitrary paths. `write_file` skips path validation when `workspace=None` (always `None` in production). Version 4.6.40 fixes the issue. |
| A crafted message in the BuildKit low-level build API can be used to remove the contents of the /tmp directory. The action that can normally be used to delete files inside the build container rootfs can escape into the real host temp directory. |
| A malicious BuildKit client or frontend could craft a request that could lead to BuildKit daemon crashing with a panic. |
| A vulnerability was determined in QUSETIONS MiniCode-Python 0.1.0. This vulnerability affects the function subprocess.Popen of the file minicode/config.py of the component Project File Handler. Executing a manipulation can lead to os command injection. The attack may be launched remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.1.0-rc1 is able to resolve this issue. This patch is called 9d868dc2550f426c6ddf8ee98f30ffe450ca5e32. It is suggested to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix race between sctp_wait_for_connect and peeloff
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
When queue allocation fails partway through, the error cleanup frees
and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as
mana_remove(), mana_change_mtu() recovery, and internal error handling
in mana_alloc_queues() can subsequently call into functions that
dereference these pointers without NULL checks:
- mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer
dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26).
- mana_destroy_vport() iterates apc->rxqs without a NULL check.
- mana_fence_rqs() iterates apc->rxqs without a NULL check.
- mana_dealloc_queues() iterates apc->tx_qp without a NULL check.
Add NULL guards for apc->rxqs in mana_fence_rqs(),
mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a
NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue
draining when TX queues were never allocated or already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). |
