| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Authorization vulnerability was identified in the EOL OVA based connect component which is deployed for installation purposes in the customer internal network. Under certain conditions, this could allow a bad actor to gain unauthorized access to the local db containing weakly hashed credentials of the installer. This EOL component was deprecated in September 2023 with end of support extended till January 2024. |
| Missing cryptographic key commitment in the Amazon S3 Encryption Client for .NET may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade Amazon S3 Encryption Client for .NET to version 3.2.0 or later. |
| Missing cryptographic key commitment in the AWS SDK for Ruby may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade AWS SDK for Ruby to version 1.208.0 or later. |
| Due to reliance on a trivial substitution cipher, sent in cleartext, and the reliance on a default password when the user does not set a password, the Remote Mouse Server by Emote Interactive can be abused by attackers to inject OS commands over theproduct's custom control protocol. A Metasploit module was written and tested against version 4.110, the current version when this CVE was reserved. |
| A vulnerability was detected in PandaXGO PandaX up to fb8ff40f7ce5dfebdf66306c6d85625061faf7e5. This affects an unknown function of the file config.yml of the component JWT Secret Handler. The manipulation of the argument key results in use of hard-coded cryptographic key
. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| The authentication process to the web server uses a challenge response procedure which
inludes the nonce and additional information. This challenge can be used several times for login and is
therefore vulnerable for a replay attack. |
| A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.64), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.64), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.64), SIPROTEC 5 6MD89 (CP300) (All versions < V9.64), SIPROTEC 5 6MU85 (CP300) (All versions < V9.64), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V9.64), SIPROTEC 5 7SA82 (CP100) (All versions < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.65), SIPROTEC 5 7SA84 (CP200) (All versions), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.65), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.65), SIPROTEC 5 7SD82 (CP100) (All versions < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.65), SIPROTEC 5 7SD84 (CP200) (All versions), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.65), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.65), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.65), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.65), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.65), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.65), SIPROTEC 5 7SK82 (CP100) (All versions < V8.89), SIPROTEC 5 7SK82 (CP150) (All versions < V9.65), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.65), SIPROTEC 5 7SL82 (CP100) (All versions < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.65), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.65), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.65), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST86 (CP300) (All versions < V9.64), SIPROTEC 5 7SX82 (CP150) (All versions < V9.65), SIPROTEC 5 7SX85 (CP300) (All versions < V9.65), SIPROTEC 5 7UM85 (CP300) (All versions < V9.64), SIPROTEC 5 7UT82 (CP100) (All versions < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.65), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.65), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.65), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.65), SIPROTEC 5 7VE85 (CP300) (All versions < V9.64), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.65), SIPROTEC 5 7VU85 (CP300) (All versions < V9.64), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V9.62 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V9.62 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions < V9.62), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.64). The affected devices are supporting weak ciphers on several ports (443/tcp for web, 4443/tcp for DIGSI 5 and configurable port for syslog over TLS).
This could allow an unauthorized attacker in a man-in-the-middle position to decrypt any data passed over to and from those ports. |
| Reusing a nonce, key pair in encryption issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. If this vulnerability is exploited, the content of direct messages (DMs) between users may be manipulated by a man-in-the-middle attack. |
| ci solution CI-Out-of-Office Manager through 6.0.0.77 uses a Hard-coded Cryptographic Key. |
| A vulnerability in the cryptographic logic used by HPE Aruba Networking EdgeConnect SD-WAN Gateways could allow an authenticated remote attacker to gain shell access. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system, potentially leading to unauthorized access and control over the affected systems. |
| Weak encryption vulnerability in Hitachi JP1/IT Desktop Management 2 - Smart Device Manager on Windows.This issue affects JP1/IT Desktop Management 2 - Smart Device Manager: from 12-00 before 12-00-08, from 11-10 through 11-10-08, from 11-00 through 11-00-05, from 10-50 through 10-50-06. |
| Weak algorithm used to sign RPM package. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux) before build 39185, Acronis Cyber Protect 16 (Linux) before build 39938. |
| Actualizer is a single shell script solution to allow developers and embedded engineers to create Debian operating systems (OS). Prior to version 1.2.0, Actualizer uses OpenSSL's "-passwd" function, which uses SHA512 instead of a more suitable password hasher like Yescript/Argon2i. All Actualizer users building a full Debian Operating System are affected. Users should upgrade to version 1.2.0 of Actualizer. Existing OS deployment requires manual password changes against the alpha and root accounts. The change will deploy's Debian's yescript overriding the older SHA512 hash created by OpenSSL. As a workaround, users need to reset both `root` and "Alpha" users' passwords. |
| A “Use of a Broken or Risky Cryptographic Algorithm” vulnerability in the SSL/TLS component used in B&R Automation Runtime versions before 6.1 and B&R mapp View versions before 6.1 may be abused by unauthenticated network-based attackers to masquerade as services on impacted devices. |
| Arcade MCP allows you to to create, deploy, and share MCP Servers. Prior to 1.5.4, the arcade-mcp HTTP server uses a hardcoded default worker secret ("dev") that is never validated or overridden during normal server startup. As a result, any unauthenticated attacker who knows this default key can forge valid JWTs and fully bypass the FastAPI authentication layer. This grants remote access to all worker endpoints—including tool enumeration and tool invocation—without credentials. This vulnerability is fixed in 1.5.4. |
| desknet's NEO V4.0R1.0 to V9.0R2.0 contains a hard-coded cryptographic key, which allows an attacker to create malicious AppSuite applications. |
| The Bastion provides authentication, authorization, traceability and auditability for SSH accesses. Session-recording ttyrec files, may be handled by the provided osh-encrypt-rsync script that is a helper to rotate, encrypt, sign, copy, and optionally move them to a remote storage periodically, if configured to. When running, the script properly rotates and encrypts the files using the provided GPG key(s), but silently fails to sign them, even if asked to. |
| Inadequate Encryption Strength vulnerability allow an authenticated attacker to execute arbitrary OS Commands via encrypted package upload.This issue affects Envoy: 4.x and 5.x |
| free-one-api allows users to access large language model reverse engineering libraries through the standard OpenAI API format. In versions up to and including 1.0.1, MD5 is used to hash passwords before sending them to the backend. MD5 is a cryptographically broken hashing algorithm and is no longer considered secure for password storage or transmission. It is vulnerable to collision attacks and can be easily cracked using modern hardware, exposing user credentials to potential compromise. As of time of publication, a replacement for MD5 has not been committed to the free-one-api GitHub repository. |
| ESPTouch is a connection protocol for internet of things devices. In the ESPTouchV2 protocol, while there is an option to use a custom AES key, there is no option to set the IV (Initialization Vector) prior to versions 5.3.2, 5.2.4, 5.1.6, and 5.0.8. The IV is set to zero and remains constant throughout the product's lifetime. In AES/CBC mode, if the IV is not properly initialized, the encrypted output becomes deterministic, leading to potential data leakage. To address the aforementioned issues, the application generates a random IV when activating the AES key starting in versions 5.3.2, 5.2.4, 5.1.6, and 5.0.8. This IV is then transmitted along with the provision data to the provision device. The provision device has also been equipped with a parser for the AES IV. The upgrade is applicable for all applications and users of ESPTouch v2 component from ESP-IDF. As it is implemented in the ESP Wi-Fi stack, there is no workaround for the user to fix the application layer without upgrading the underlying firmware. |
