| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Samba. The smbd service daemon does not pick up group membership changes when re-authenticating an expired SMB session. This issue can expose file shares until clients disconnect and then connect again. |
| A flaw was found in the libssh library in versions less than 0.11.2. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior. |
| A vulnerability was found in MariaDB. An OpenVAS port scan on ports 3306 and 4567 allows a malicious remote client to cause a denial of service. |
| A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah. |
| A Cross-site request forgery vulnerability exists in ipa/session/login_password in all supported versions of IPA. This flaw allows an attacker to trick the user into submitting a request that could perform actions as the user, resulting in a loss of confidentiality and system integrity. During community penetration testing it was found that for certain HTTP end-points FreeIPA does not ensure CSRF protection. Due to implementation details one cannot use this flaw for reflection of a cookie representing already logged-in user. An attacker would always have to go through a new authentication attempt. |
| A flaw was found in Red Hat AMQ Broker Operator, where it displayed a password defined in ActiveMQArtemisAddress CR, shown in plain text in the Operator Log. This flaw allows an authenticated local attacker to access information outside of their permissions. |
| A flaw was found in Booth, a cluster ticket manager. If a specially-crafted hash is passed to gcry_md_get_algo_dlen(), it may allow an invalid HMAC to be accepted by the Booth server. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix NULL pointer dereference in gfs2_log_flush
In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush
lock to provide exclusion against gfs2_log_flush().
In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before
dereferencing it. Otherwise, we could run into a NULL pointer
dereference when outstanding glock work races with an unmount
(glock_work_func -> run_queue -> do_xmote -> inode_go_sync ->
gfs2_log_flush). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b.
The revert is required due to the suspicion it is not good for anything
and cause crash. |
| GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in gst_wavparse_adtl_chunk within gstwavparse.c. This vulnerability arises due to insufficient validation of the size parameter, which can exceed the bounds of the data buffer. As a result, an OOB read occurs in the following while loop. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| The qtdemux_tag_add_str_full function in gst/isomp4/qtdemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds read and crash) via a crafted tag value. |
| The gst_ps_demux_parse_psm function in gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows remote attackers to cause a denial of service (invalid memory read and crash) via vectors involving PSM parsing. |
| The gst_date_time_new_from_iso8601_string function in gst/gstdatetime.c in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds heap read) via a malformed datetime string. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An uninitialized stack variable vulnerability has been identified in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. When size < 4, the program calls gst_buffer_unmap with an uninitialized map variable. Then, in the gst_memory_unmap function, the program will attempt to unmap the buffer using the uninitialized map variable, causing a function pointer hijack, as it will jump to mem->allocator->mem_unmap_full or mem->allocator->mem_unmap. This vulnerability could allow an attacker to hijack the execution flow, potentially leading to code execution. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. The program attempts to reallocate the memory pointed to by stream->samples to accommodate stream->n_samples + samples_count elements of type QtDemuxSample. The problem is that samples_count is read from the input file. And if this value is big enough, this can lead to an integer overflow during the addition. As a consequence, g_try_renew might allocate memory for a significantly smaller number of elements than intended. Following this, the program iterates through samples_count elements and attempts to write samples_count number of elements, potentially exceeding the actual allocated memory size and causing an OOB-write. This vulnerability is fixed in 1.24.10. |
| The html_context_handle_element function in gst/subparse/samiparse.c in gst-plugins-base in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds write) via a crafted SMI file, as demonstrated by OneNote_Manager.smi. |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of tile list data within AV1-encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22873. |
