| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate mesh send advertising payload length
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request. |
| Side-channel information leakage in Media in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| An issue was discovered in 6.0 before 6.0.5 and 5.2 before 5.2.14.
ASGI requests with a missing or understated `Content-Length` header can bypass the `FILE_UPLOAD_MAX_MEMORY_SIZE` limit, potentially loading large files into memory and causing service degradation.
As a reminder, Django expects a limit to be configured at the web server level rather than solely relying on `FILE_UPLOAD_MAX_MEMORY_SIZE`.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Kyle Agronick for reporting this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| When processing the header of an incoming message, libnv failed to properly validate the message size.
The lack of validation allows a malicious program to write outside the bounds of a heap allocation. This can trigger a crash or system panic, and it may be possible for an unprivileged user to exploit the bug to elevate their privileges. |
| An improper handling of the length parameter inconsistency vulnerability has been identified in Moxa’s Secure Router. Because of improper validation of length parameters in the HTTPS management interface, an unauthenticated remote attacker could send specially crafted requests that trigger a buffer overflow condition, causing the web service to become unresponsive. Successful exploitation may result in a denial-of-service condition requiring a device reboot to restore normal operation. While successful exploitation can severely impact the availability of the affected device, no impact to the confidentiality or integrity of the affected product has been identified. Additionally, no confidentiality, integrity, or availability impact to the subsequent system has been identified. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.24 to before 0.10.78, the FFI trampolines behind SslContextBuilder::set_psk_client_callback, set_psk_server_callback, set_cookie_generate_cb, and set_stateless_cookie_generate_cb forwarded the user closure's returned usize directly to OpenSSL without checking it against the &mut [u8] that was handed to the closure. This can lead to buffer overflows and other unintended consequences. This vulnerability is fixed in 0.10.78. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| The asn1buf_imbed function in the ASN.1 decoder in MIT Kerberos 5 (aka krb5) 1.6.3, when PK-INIT is used, allows remote attackers to cause a denial of service (application crash) via a crafted length value that triggers an erroneous malloc call, related to incorrect calculations with pointer arithmetic. |
| Stack-based buffer overflow in the parse_tag_11_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to not ensuring that the key signature length in a Tag 11 packet is compatible with the key signature buffer size. |
| Heap-based buffer overflow in the parse_tag_3_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to a large encrypted key size in a Tag 3 packet. |
| Stack-based buffer overflow in the script_write_params method in client/dhclient.c in ISC DHCP dhclient 4.1 before 4.1.0p1, 4.0 before 4.0.1p1, 3.1 before 3.1.2p1, 3.0, and 2.0 allows remote DHCP servers to execute arbitrary code via a crafted subnet-mask option. |
| An issue was discovered in HAProxy before 3.3.6. The HTTP/3 parser does not check that the received body length matches a previously announced content-length when the stream is closed via a frame with an empty payload. This can cause desynchronization issues with the backend server and could be used for request smuggling. The earliest affected version is 2.6. |
| The 'zipfile' module would not check the validity of the ZIP64 End of
Central Directory (EOCD) Locator record offset value would not be used to
locate the ZIP64 EOCD record, instead the ZIP64 EOCD record would be
assumed to be the previous record in the ZIP archive. This could be abused
to create ZIP archives that are handled differently by the 'zipfile' module
compared to other ZIP implementations.
Remediation maintains this behavior, but checks that the offset specified
in the ZIP64 EOCD Locator record matches the expected value. |
| libgphoto2 is a camera access and control library. In versions up to and including 2.5.33, two functions in camlibs/ptp2/ptp-pack.c accept a data pointer but no length parameter, performing unbounded reads. Their callers in ptp_unpack_EOS_events() have xsize available but never pass it, leaving both functions unable to validate reads against the actual buffer boundary. Commit 1817ecead20c2aafa7549dac9619fe38f47b2f53 patches the issue. |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. |
| The (1) TLS and (2) DTLS implementations in OpenSSL 1.0.1 before 1.0.1g do not properly handle Heartbeat Extension packets, which allows remote attackers to obtain sensitive information from process memory via crafted packets that trigger a buffer over-read, as demonstrated by reading private keys, related to d1_both.c and t1_lib.c, aka the Heartbleed bug. |
| Net::CIDR::Lite versions before 0.23 for Perl mishandles IPv4 mapped IPv6 addresses, which may allow IP ACL bypass.
_pack_ipv6() includes the sentinel byte from _pack_ipv4() when building the packed representation of IPv4 mapped addresses like ::ffff:192.168.1.1. This produces an 18 byte value instead of 17 bytes, misaligning the IPv4 part of the address.
The wrong length causes incorrect results in mask operations (bitwise AND truncates to the shorter operand) and in find() / bin_find() which use Perl string comparison (lt/gt). This can cause find() to incorrectly match or miss addresses.
Example:
my $cidr = Net::CIDR::Lite->new("::ffff:192.168.1.0/120");
$cidr->find("::ffff:192.168.2.0"); # incorrectly returns true
This is triggered by valid RFC 4291 IPv4 mapped addresses (::ffff:x.x.x.x).
See also CVE-2026-40198, a related issue in the same function affecting malformed IPv6 addresses. |
| WARNING:
Users of 6.x should upgrade to 6.2.4 or later as the fix was missed in previous 6.x releases.
See the following for more details:
https://activemq.apache.org/security-advisories.data/CVE-2026-40046-announcement.txt
https://www.cve.org/CVERecord?id=CVE-2026-40046
Original Report:
Apache ActiveMQ does not properly validate the remaining length field which may lead to an overflow during the decoding of malformed packets. When this integer overflow occurs, ActiveMQ may incorrectly compute the total Remaining Length and subsequently misinterpret the payload as multiple MQTT control packets which makes the broker susceptible to unexpected behavior when interacting with non-compliant clients. This behavior violates the MQTT v3.1.1 specification, which restricts Remaining Length to a maximum of 4 bytes. The scenario occurs on established connections after the authentication process. Brokers that are not enabling mqtt transport connectors are not impacted.
This issue affects Apache ActiveMQ: before 5.19.2, 6.0.0 to 6.1.8, and 6.2.0
Users are recommended to upgrade to version 5.19.2, 6.1.9, or 6.2.1, which fixes the issue. |
