| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Engineering Lifecycle Management 7.0.3, 7.1.0, and 7.2.0 could allow an unauthenticated remote attacker to update server property files that would allow them to gain unauthorized access to the application. |
| Mattermost Plugins versions <=11.5 11.1.5 10.13.11 11.3.4.0 fail to appropriately check for valid namespaces which allows plugin users to create subscriptions to groups that were not whitelisted via creating groups that share the same prefix as a whitelisted group. Mattermost Advisory ID: MMSA-2026-00601 |
| Mattermost Plugins versions <=11.5 11.1.5 10.13.11 11.3.4.0 fail to have API-level checks on which groups the user can create issues or attach comments to which allows a user that is member of multiple groups to create issues to a locked group via direct API requests. Mattermost Advisory ID: MMSA-2026-00602 |
| The Docker CLI --use-api-socket flag bypasses Enhanced Container Isolation (ECI) restrictions in Docker Desktop. When ECI is enabled, Docker socket mounts from containers are denied unless explicitly allowed via the admin-settings configuration. However, the --use-api-socket flag adds the Docker socket mount via the HostConfig.Mounts field rather than the HostConfig.Binds field. The ECI enforcement in the Docker Desktop API proxy only inspected Binds, allowing the mount to pass unchecked. This grants a container full access to the Docker Engine socket and, if the host user has logged in to container registries, their authentication credentials.
A local attacker with the ability to run Docker CLI commands can exploit this to escape ECI restrictions, access the Docker Engine, and potentially escalate privileges. |
| A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission.
This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.54.0, which fixes the issue. |
| GitHub CLI (gh) is GitHub’s official command line tool. Prior to 2.93.0, GitHub CLI incorrectly includes authorization header in API requests to TUF repository mirrors via gh attestation, gh release verify, and gh release verify-asset commands. The CLI uses a shared HTTP client with an authentication layer that automatically attaches tokens to outgoing requests. This layer lacks accurate host detection and can incorrectly attribute the target host, providing it with a token it should never receive. Specifically, the host normalization logic collapses any *.github.com subdomain to github.com, so a request to tuf-repo.github.com (a GitHub Pages site, not a GitHub API endpoint) is treated as a request to github.com and receives the user's github.com token. For hosts that don't match github.com or a known GHES instance at all, the resolver falls back to GH_ENTERPRISE_TOKEN if set. The gh attestation, gh release verify and gh release verify-asset commands fetch data from several external hosts as part of their normal operation (TUF metadata from tuf-repo.github.com and tuf-repo-cdn.sigstore.dev, artifact bundles from Azure Blob Storage). Because these requests go through the same authenticated HTTP client, the token is sent to all of them. This vulnerability is fixed in 2.93.0. |
| OpenClaw before 2026.4.29 contains a policy bypass vulnerability in QQBot admin commands that allows authenticated senders to skip DM-only and allowFrom policy checks. Attackers can route admin commands from unauthorized senders or contexts to execute restricted behavior that policy should have blocked. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.9 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed a blocked Project Access Token to continue accessing private resources due to incorrect authorization enforcement. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 to before 4.2.4, RabbitMQ's MQTT plugin allows for topic-level authorization using regular expressions with variable substitution. Administrators can create patterns such as ^{client_id}-sensors$ to restrict user access to topics that include their client ID. However, the client_id is provided by the user in the MQTT CONNECT packet and is inserted into the regex pattern without escaping special regex characters. This flaw enables an authenticated MQTT user to inject regex operators to bypass authorization. This vulnerability is fixed in 4.2.4 and 4.3.0. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, when a PAM service is configured with deny_remote=false in pam_usb (commonly done for display managers such as gdm-password or lightdm to bypass process/TTY heuristics for local sessions), the PAM_RHOST check in pusb_do_auth() is also skipped. PAM_RHOST is set by remote daemons (sshd, XDMCP servers) to identify the remote client address. Because the check is gated inside if (opts.deny_remote), a genuine remote XDMCP connection reaches the USB device authentication step instead of being rejected. This vulnerability is fixed in 0.9.1. |
| OpenReplay is a self-hosted session replay suite. Prior to 1.26.0, there is a cross-tenant IDOR on feature-flag and assist-stats routes via {project_id} case mismatch. ProjectAuthorizer.__call__ (OSS api/auth/auth_project.py:14-38 and EE ee/api/auth/auth_project.py:14-46) only runs projects.is_authorized(project_id, tenant_id, user_id) + projects.get_project(tenant_id, project_id) when self.project_identifier == "projectId" (camelCase). For EE multi-tenant, feature-flag queries only filter on project_id, never tenant_id. Any authenticated user in tenant A can read/update/delete feature-flag rows belonging to tenant B by iterating the sequential integer project_id + feature_flag_id. OSS is single-tenant by design ({"errors":["tenants already registered"]} on second signup) so there's no cross-tenant impact This vulnerability is fixed in 1.26.0. |
| An authorization bypass vulnerability exists in the Mautic 7 API v2 endpoints (utilizing API Platform). Under certain conditions, roles configured with owner-scope restrictions (such as `viewown` or `editown`) are not properly enforced. This allows low-privilege authenticated API users to bypass ownership-logic controls and access or modify resources belonging to other users. |
| In OpenStack Neutron before 28.0.1, the tagging controller enforces plural policy action names on single-tag write operations while the defined policy rules use singular names. The mismatched names evaluate as allowed under the default policy, permitting a project reader to create and update tags on same-project resources. Deployments running Neutron 26.0.0 or later are affected. |
| An issue was discovered in OpenStack Keystone before 29.0.2. The Keystone RBAC policy enforcer in enforce_call unconditionally merges the raw JSON request body into the policy enforcement dictionary via policy_dict.update(json_input.copy()), overwriting trusted target data that was previously set from database lookups. Because flask.request.get_json is called with force=True, this works regardless of Content-Type or HTTP method. Any authenticated user can inject arbitrary policy target attributes (e.g., user_id, project_id) into the request body to bypass RBAC checks and perform unauthorized operations on resources belonging to other users or projects. This was introduced in commit 5ea59f52 (Rocky/14.0.0). |
| Mantis Bug Tracker (MantisBT) is an open source issue tracker. Prior to 2.28.2, the mc_issue_update() function in MantisBT allows users having update_bug_threshold access (UPDATER, with default settings) to edit, change view state, and modify time tracking on bugnotes belonging to other users — bypassing the default DEVELOPER (level 55) threshold required by the dedicated mc_issue_note_update() function. This vulnerability is fixed in 2.28.2. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.2, improper authorization in the UploadPartCopy operation allows copying objects across buckets without enforcing destination bucket restrictions on allowed copy sources. The implementation validates GetObject permission on the source bucket and PutObject on the destination bucket independently, but does not enforce any policy constraints on whether the destination bucket permits the specified copy source. This enables unauthorized cross-bucket data movement. This vulnerability is fixed in 1.0.0-beta.2. |
| An issue was discovered in OpenStack Keystone before 29.0.2. When combined with an application credential impersonation vulnerability, an attacker with the member role on a project can escalate to admin by chaining unrestricted application credentials with Keystone trusts. The impersonated token carries the victim's identity, which passes the trustor validation check. Keystone then validates the delegated roles against the victim's actual role assignments in the database, not the roles on the requesting token. This allows the attacker to create a trust delegating the victim's admin role to themselves. The trust persists independently, and additional trusts and application credentials can be created to maintain access. All actions are logged under the victim's identity. |
| An issue was discovered in OpenStack Keystone before 29.0.2. The Keystone federated token rescoping mechanism does not propagate the original token's expiry to the newly issued token. When a federated user rescopes a token via POST /v3/auth/tokens, the handle_scoped_token() function in the mapped authentication plugin returns response data without an expires_at value. The token provider falls back to issuing a token with a fresh default TTL. By rescoping repeatedly before each token expires, a user can maintain access indefinitely, bypassing operator-configured token lifetime policies. This is a variant of CVE-2012-3426. Only deployments using federated identity (SAML2, OpenID Connect) are affected. |
| An issue was discovered in OpenStack Keystone before 29.0.2. The Keystone application credential authentication plugin does not verify that the user supplied in the authentication request matches the owner of the application credential. An attacker can authenticate with their own application credential ID and secret while specifying a different user's name and domain in the request body. Keystone issues a token attributed to the victim user. The impersonated token is project-scoped and carries the intersection of the application credential's roles and the victim's actual roles on the project. This enables audit evasion, reading the victim's credentials, and acting as the victim within shared projects. |
| The WDB target agent debug service in Wind River VxWorks 6.x, 5.x, and earlier, as used on the Rockwell Automation 1756-ENBT series A with firmware 3.2.6 and 3.6.1 and other products, allows remote attackers to read or modify arbitrary memory locations, perform function calls, or manage tasks via requests to UDP port 17185, a related issue to CVE-2005-3804. |
