| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix resume-vs-remove race
If the user issues the resume ioctl and the remove ioctl at the same
time, it may be possible that the device is resumed after it is suspended
in __dm_destroy. The result is that the table is destroyed without
calling the postsuspend method.
Dm targets expect that they may be removed only after the postsuspend
method method was called. If we break this expectation, it can cause
misbehavior in various targets. For example - in the dm-integrity target,
the reboot notifier is not unregistered, leading to use-after-free.
Fix this bug by refusing to resume if the device is being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: tracing: no ptr dereference during log output
The fsl edma events store a pointer to a struct fsl_edma_engine in the
ringbuffer and dereference it when a log entry is printed. At this time,
the pointer may no longer be valid.
Event injection can be used to trigger a crash:
$ cd /sys/kernel/tracing
$ echo 'value = 0' > events/fsl_edma/edma_writeb/inject
$ cat trace
The log output needs only edma->membase. Add a membase field at the end
of the event and use the new field for log output. Keep the existing
fields for backward compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuidle: dt_idle_genpd: kfree() the original name allocation
dt_idle_pd_alloc() kasprintf()s the full node path, then points
pd->name at kbasename() of that string. dt_idle_pd_free() kfree()s
pd->name, which is no longer the start of the allocation.
Copy the basename instead. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Protect kprobe_blacklist with RCU
__within_kprobe_blacklist() traverses kprobe_blacklist without holding
kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist()
removes blacklist entries and immediately frees them with kfree().
A concurrent call to within_kprobe_blacklist() can therefore dereference
freed memory.
Furthermore, within_kprobe_blacklist() can be called in atomic or
non-preemptible contexts where the sleeping kprobe_mutex cannot be taken.
Protect kprobe_blacklist with RCU. Use guard(rcu)() and
list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for
insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim
entries safely after a grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: harmony: initialize locks before requesting IRQ
snd_harmony_create() registers the IRQ before initializing h->lock and
h->mixer_lock. A pending interrupt can invoke the handler while these
locks are uninitialized.
Initialize both locks before requesting the IRQ so the handler always
sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Fix race between non-atomic ops and trigger-start
We protect the races of the concurrent state transitions between
atomic PCM ops, but the checks between the non-atomic ops (hw_params,
hw_free and prepare) and the atomic ops aren't perfect; there is a
check of the conflicting PCM state at the beginning of hw_params & co,
but the atomic PCM ops can be still issued during the non-atomic PCM
operations. An example such scenario is that a thread A re-issues the
PREPARE or HW_PARAMS for the already prepared stream, while another
thread B triggers the PCM start in the middle of the prepare
operation. Although this usually doesn't lead to much serious issues,
it can give some inconsistency as reported by syzkaller (such as
ODEBUG warning).
There are various atomic PCM ops, and basically the only problem is
the PCM start as it operates from the PREPARED state. Other trigger
commands (stop, etc) are for the running or the other special state,
hence they are filtered as pre-condition.
This patch is for preventing the PCM trigger-start during the non-
atomic operations in order to address the problems above.
Fortunately, the hw_params, hw_free and prepare operations call
snd_pcm_buffer_access_lock(), and this can be used for checking the
concurrent operations at the PCM trigger -- which sets the
runtime->buffer_accessing to a negative (if possible), so the PCM
trigger just needs to check the runtime->buffer_accessing value; if
it's negative, it means the concurrent non-atomic PCM ops is running. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: add missing SRCU grace period in error path
nvme_alloc_ns() error path at out_unlink_ns removes ns from the
namespace head siblings list with list_del_rcu(&ns->siblings) but
does not wait for SRCU readers before freeing the namespace struct.
Multipath code iterates the head->list under srcu_read_lock() in
nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent
reader can still hold a reference to ns when kfree(ns) runs.
The normal removal path in nvme_ns_remove() correctly calls
synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for
in-progress readers. Add the same grace period in the error path. |
| reNgine through 2.2.0 contains an authorization bypass vulnerability in the GetFileContents API endpoint that allows any authenticated user to read bundled recon tool configuration files. Attackers with low-privilege Auditor roles can access files containing third-party API keys for services like SecurityTrails, Shodan, Censys, VirusTotal, BinaryEdge and Hunter by querying the endpoint without role-based permission checks. |
| Hippo4j through 1.5.0 contains a server-side request forgery vulnerability in four ThreadPoolController endpoints that fail to validate the clientAddress parameter. Authenticated attackers can supply arbitrary hostnames and ports to trigger outbound GET requests to internal networks and cloud metadata services. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU
nvmet_tcp_try_recv_pdu() reads a PDU header into the fixed 128-byte
queue->pdu union, then computes the remaining payload length as
queue->left = hdr->hlen - queue->offset + hdgst;
and reads that many more bytes into &queue->pdu + queue->offset, without
ever bounding the result against sizeof(queue->pdu).
A struct nvme_tcp_icreq_pdu is itself 128 bytes, exactly the size of the
union. Once a header digest has been negotiated (hdgst = 4), a second
ICReq passes the hlen == nvmet_tcp_pdu_size() check but yields
queue->left = 128 - 8 + 4 = 124, so bytes 8..132 are written into the
128-byte buffer -- 4 bytes past its end, over queue->hdr_digest and
queue->data_digest. Those bytes are attacker-controlled (an ICReq
carries no digest), and the duplicate ICReq is only rejected later,
after the overflow. A remote unauthenticated host can thus corrupt
kernel memory adjacent to the receive buffer.
Reject any PDU whose declared length would read past the end of
queue->pdu before the second recv. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: reject unsolicited H2CData PDUs
nvmet_tcp_handle_h2c_data_pdu() accepts an H2CData PDU after only checking
that its TTAG is a valid in-range command index and that the command's
data buffers are mapped. It never checks that the target has actually
solicited that data by sending an R2T for the command.
A remote host can abuse this. It submits a write command that takes the
R2T path and, before the target transmits the R2T, sends an H2CData PDU
for that command's tag. The data completes the command early, and when
the command then fails synchronously (e.g. a length mismatch caught by
nvmet_check_transfer_len()), it is completed a second time. Each
completion calls nvmet_tcp_queue_response(), so the same command is added
to queue->resp_list twice while it is still linked; the second llist_add()
makes the node point to itself (lentry->next == lentry).
nvmet_tcp_process_resp_list() then walks that self-referential node and
adds the command to resp_send_list twice. With CONFIG_DEBUG_LIST this
trips the "list_add double add" check (kernel BUG); without it the loop
never terminates and the nvmet_tcp workqueue wedges (soft-lockup). It is
remotely triggerable and needs no authentication on an allow_any_host
subsystem.
Track whether an R2T has been transmitted for a command and reject an
H2CData PDU that arrives before it. The flag is cleared on command reuse
(nvmet_tcp_get_cmd() zeroes cmd->flags) and stays set across the multiple
H2CData PDUs of a single solicited transfer. |
| Rallly before 4.15.0 contains an information disclosure vulnerability in the polls.get tRPC procedure that returns scheduled-event invitee names and email addresses to unauthenticated callers. Attackers can access a poll's urlId from public invite links to retrieve sensitive invitee information regardless of privacy settings. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of
bitmap_andnot() to determine whether the guest APCB needs to be updated.
However, bitmap_andnot() returns false when the resulting destination
bitmap is empty. This means that if the only adapter, domain or control
domain assigned to an mdev is removed from the host's AP configuration,
the bit is correctly cleared from the shadow APCB, but bitmap_andnot()
returns false because the result is an empty bitmap. Consequently,
do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called,
leaving the KVM guest with stale hardware access to the unplugged AP
devices.
Fix this by replacing the bitmap_andnot() return value check with
bitmap_intersects() to determine whether the shadow APCB actually
overlaps with the removal mask. If there is an intersection, call
bitmap_andnot() solely for its side effect of clearing the bits, then
unconditionally set do_hotplug to trigger the guest APCB update. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: afs: validate v2 image info bounds
The AFS v2 parser uses footer[8] to locate the image information block
inside the current erase block, then uses the image information
region_count to walk entries from a fixed local array. The footer offset
and region count come from flash contents and are not checked against the
erase block or the local image-info array before use.
Reject v2 entries whose image information offset would underflow the
erase block calculation, and reject region counts that cannot fit in the
local image-info array before walking region entries. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix stale receive device on merged fragments
Fragment reassembly reuses the skb from the highest-numbered buffered
fragment as the merged packet. When that fragment was received on a hard
interface which is deleted before the chain completes, the merged skb can
re-enter the receive path with a stale skb->dev and skb_iif.
batadv_batman_skb_recv() passes such merged packets through the normal
receive handlers again. DAT and bridge loop avoidance both derive the ARP
header length from skb->dev, so they can dereference the freed net_device
before the packet reaches the local mesh interface.
Refresh the receive device metadata from the current receive device before
running the packet handlers. This keeps internally reinjected merged
fragments consistent with the normal receive path after hard interface
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: meson: align gxbb_32k_clk_sel number of parents with actual count
The following out-of-bounds read has been observed by Christian on a
GXBB WeTek Hub:
==================================================================
BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418
Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT
Hardware name: WeTek Hub (DT)
Call trace:
show_stack+0x14/0x20 (C)
dump_stack_lvl+0x74/0x94
print_report+0x164/0x4b0
kasan_report+0x98/0xd8
__asan_report_load8_noabort+0x1c/0x24
__clk_register+0x1b70/0x2418
devm_clk_hw_register+0x74/0x15c
meson_clkc_init+0xd4/0x20c
meson_clkc_syscon_probe+0x5c/0x94
platform_probe+0xbc/0x17c
really_probe+0x184/0x844
__driver_probe_device+0x154/0x35c
driver_probe_device+0x60/0x188
__driver_attach+0x168/0x4a0
bus_for_each_dev+0xec/0x180
driver_attach+0x38/0x58
bus_add_driver+0x238/0x4c0
driver_register+0x150/0x388
__platform_driver_register+0x54/0x7c
gxbb_clkc_driver_init+0x18/0x20
do_one_initcall+0xb8/0x340
kernel_init_freeable+0x49c/0x52c
kernel_init+0x24/0x148
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
gxbb_32k_clk_parents+0x60/0x400
The buggy address belongs to a vmalloc virtual mapping
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9
>ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
^
ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9
ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9
==================================================================
Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock
parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel
mux but didn't adjust the hard-coded num_parents field. Fix the actual
number of parents of that mux by using ARRAY_SIZE instead (avoiding
similar problems in future). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: loongson: Fix error handling in ACPI property parsing
In loongson_card_parse_acpi(), the return value of
device_property_read_string() for the `codec-dai-name` property was
ignored. If the property is missing or invalid, an uninitialized pointer
would be used later, potentially leading to undefined behavior.
Fix this by checking the return value and propagating the error
appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix potential use-after-free in anonymous buffer release
An anonymous buffer handle holds a reference to the underlying IIO device.
The reference is dropped in the buffer handle's release function. If the
device has been removed, either through unbind or hot-unplug, the buffer
handle might hold the last reference.
The release function takes the mutex for the buffer using a guard, which
means the unlock happens after all the code in the function, including
`iio_device_put()`. If the anonymous buffer holds the last reference this
might free both the IIO device and the buffer, which contains the mutex,
leading to use-after-free when the mutex is unlocked.
Fix this by using a scoped guard just around the buffer dmabuf list access,
making sure the mutex is unlocked before releasing the IIO device.
Version 10 of the patch that introduced this issue used this exact scheme
of first unlocking and then dropping the reference [1]. During review it
was suggested to use a guard instead, and version 11 made that change [2]. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Make IIO DMA fence release RCU-safe
The `dma_fence` documentation states that if a custom release
implementation is provided, the `dma_fence` object must be freed in an
RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`,
which might result in a use-after-free.
Remove the custom `release` implementation. This makes the DMA fence core
fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence.
This requires that the fence be the first member of `struct iio_dma_fence`.
Using the default release method for extended DMA fence structures is a
common pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Tie IIO dma fence lock lifetime to the fence
The `iio_dma_fence` implementation currently uses a lock embedded in the
`iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the
`iio_dmabuf_priv`, which can cause a use-after-free.
Tie the lifetime of the lock to the lifetime of the fence by embedding them
in the same struct.
We can't just hold a reference to the `iio_dmabuf_priv` from the
`iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the
fence release callback is not allowed to sleep.
Note that the `dma_fence` framework now has an internal lock that gets used
when the passing `NULL` for `lock` in `dma_fence_init()`, but in order to
allow this patch to be backportable use an external lock. |
