| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Juniper Junos 11.4 before 11.4R13, 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D15, 12.2 before 12.2R9, 12.3R7 before 12.3R7-S1, 12.3 before 12.3R8, 13.1 before 13.1R5, 13.2 before 13.2R6, 13.3 before 13.3R4, 14.1 before 14.1R2, and 14.2 before 14.2R1 allows remote attackers to cause a denial of service (kernel crash and restart) via a crafted fragmented OSPFv3 packet with an IPsec Authentication Header (AH). |
| J-Web in Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D35, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D10, 12.3X48 before 12.3X48-D10, 12.2 before 12.2R9, 12.3 before 12.3R7, 13.2 before 13.2R6, 13.2X51 before 13.2X51-D20, 13.3 before 13.3R5, 14.1 before 14.1R3, 14.1X53 before 14.1X53-D10, and 14.2 before 14.2R1 allows remote attackers to conduct clickjacking attacks via an X-Frame-Options header. |
| Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D20, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R6, 13.3 before 13.3R5, 14.1 before 14.1R3, and 14.2 before 14.2R1 allows local users to gain privileges via crafted combinations of CLI commands and arguments. |
| Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D15, and 12.3X48 before 12.3X48-D10 on SRX series devices does not properly enforce the log-out-on-disconnect feature when configured in the [system port console] stanza, which allows physically proximate attackers to reconnect to the console port and gain administrative access by leveraging access to the device. |
| Juniper Junos 11.4 before 11.4R8, 12.1 before 12.1R5, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D15, 12.1X46 before 12.1X46-D10, and 12.1X47 before 12.1X47-D10 on SRX Series devices, allows remote attackers to cause a denial of service (flowd crash) via a malformed packet, related to translating IPv6 to IPv4. |
| Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D15, 12.3 before 12.3R9, 13.1 before 13.1R4-S3, 13.2 before 13.2R6, 13.3 before 13.3R5, 14.1 before 14.1R3, and 14.2 before 14.2R1 does not properly handle double quotes in authorization attributes in the TACACS+ configuration, which allows local users to bypass the security policy and execute commands via unspecified vectors. |
| The stateless firewall in Juniper Junos 13.3R3, 14.1R1, and 14.1R2, when using Trio-based PFE modules, does not properly match ports, which might allow remote attackers to bypass firewall rule. |
| The Juniper MX Series routers with Junos 13.3R3 through 13.3Rx before 13.3R6, 14.1 before 14.1R4, 14.1X50 before 14.1X50-D70, and 14.2 before 14.2R2, when configured as a broadband edge (BBE) router, allows remote attackers to cause a denial of service (jpppd crash and restart) by sending a crafted PAP Authenticate-Request after the PPPoE Discovery and LCP phase are complete. |
| Cross-site scripting (XSS) vulnerability in SRX Web Authentication (webauth) in Juniper Junos 11.4 before 11.4R11, 12.1X44 before 12.1X44-D34, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage.
This issue affects Junos OS:
21.2 releases from 21.2R3-S5 before 21.2R3-S6.
This issue does not affect earlier or later releases. |
| A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition. The process crashes and restarts automatically.
When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash. This process manages and controls the configuration of broadband subscriber sessions and services. While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition.
This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled.
This issue affects Junos OS:
* All versions before 20.4R3-S5,
* from 21.1 before 21.1R3-S4,
* from 21.2 before 21.2R3-S3,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3,
* from 22.2 before 22.2R3,
* from 22.3 before 22.3R2; |
| A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).
In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart.
This issue affects Junos OS on MX Series:
* All version before 21.2R3-S6,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2. |
| A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device.
If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed.
This issue affects Junos OS:
* All versions before 20.4R3-S7,
* 21.1 versions before 21.1R3,
* 21.2 versions before 21.2R2-S1, 21.2R3,
* 21.3 versions before 21.3R1-S2, 21.3R2. |
| Juniper Junos before 10.4 before 10.4R16, 11.4 before 11.4R8, 12.1R before 12.1R7, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D10 on SRX Series service gateways, when used as a UAC enforcer and captive portal is enabled, allows remote attackers to cause a denial of service (flowd crash) via a crafted HTTP message. |
| Juniper Junos 10.4S before 10.4S15, 10.4R before 10.4R16, 11.4 before 11.4R9, and 12.1R before 12.1R7 on SRX Series service gateways allows remote attackers to cause a denial of service (flowd crash) via a crafted IP packet. |
| Juniper Junos 10.4 before 10.4R16, 11.4 before 11.4R10, 12.1R before 12.1R8-S2, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, 12.2 before 12.2R7, 12.3 before 12.3R4-S2, 13.1 before 13.1R3-S1, 13.2 before 13.2R2, and 13.3 before 13.3R1 allows remote attackers to cause a denial of service (rdp crash) via a large BGP UPDATE message which immediately triggers a withdraw message to be sent, as demonstrated by a long AS_PATH and a large number of BGP Communities. |
| Juniper Junos before 10.4S14, 11.4 before 11.4R5-S2, 12.1R before 12.1R3, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D15 on SRX Series services gateways, when a plugin using TCP proxy is configured, allows remote attackers to cause a denial of service (flow daemon crash) via an unspecified sequence of TCP packets. |
| Cross-site scripting (XSS) vulnerability in the web-based interface in Juniper Junos Space before 13.1R1.6, as used on the JA1500 appliance and in other contexts, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, aka PR 884469. |
| Juniper Junos 10.4 before 10.4R16, 11.4 before 11.4R10, 12.1R before 12.1R8-S2, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, 12.2 before 12.2R7, 12.3 before 12.3R5, 13.1 before 13.1R3-S1, 13.2 before 13.2R2, and 13.3 before 13.3R1 allows local users to gain privileges via vectors related to "certain combinations of Junos OS CLI commands and arguments." |
| The XNM command processor in Juniper Junos 10.4 before 10.4R16, 11.4 before 11.4R10, 12.1R before 12.1R8-S2, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, 12.2 before 12.2R7, 12.3 before 12.3R5, 13.1 before 13.1R3-S1, 13.2 before 13.2R2-S2, and 13.3 before 13.3R1, when xnm-ssl or xnm-clear-text is enabled, allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors. |
