| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Stream API. This vulnerability allows exposure of sensitive client credentials and internal infrastructure headers via the test_headers field when an event stream is in test mode. The possible outcome includes leakage of internal infrastructure details, accidental disclosure of user or system credentials, privilege escalation if high-value tokens are exposed, and persistent sensitive data exposure to all users with read access on the event stream. |
| An issue in Free5GC v.4.2.0 and before allows a remote attacker to cause a denial of service via the function HandleAuthenticationFailure of the component AMF |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Streams. This vulnerability allows an authenticated user to gain access to sensitive internal infrastructure headers (such as X-Trusted-Proxy and X-Envoy-*) and event stream URLs via crafted requests and job templates. By exfiltrating these headers, an attacker could spoof trusted requests, escalate privileges, or perform malicious event injection. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s/slb: Fix SLB multihit issue during SLB preload
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary cont
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
shmem: fix recovery on rename failures
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Limit num_syncs to prevent oversized allocations
The OA open parameters did not validate num_syncs, allowing
userspace to pass arbitrarily large values, potentially
leading to excessive allocations.
Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS,
returning -EINVAL when the limit is violated.
v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh)
(cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fallback earlier on simult connection
Syzkaller reports a simult-connect race leading to inconsistent fallback
status:
WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Modules linked in:
CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6
RSP: 0018:ffffc900006cf338 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf
RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900
R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197
tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922
tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672
tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918
ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500
dst_input include/net/dst.h:471 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979
__netif_receive_skb+0x1d/0x160 net/core/dev.c:6092
process_backlog+0x442/0x15e0 net/core/dev.c:6444
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494
napi_poll net/core/dev.c:7557 [inline]
net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684
handle_softirqs+0x216/0x8e0 kernel/softirq.c:579
run_ksoftirqd kernel/softirq.c:968 [inline]
run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960
smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160
kthread+0x3c2/0x780 kernel/kthread.c:463
ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The TCP subflow can process the simult-connect syn-ack packet after
transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,
as the sk_state_change() callback is not invoked for * -> FIN_WAIT1
transitions.
That will move the msk socket to an inconsistent status and the next
incoming data will hit the reported splat.
Close the race moving the simult-fallback check at the earliest possible
stage - that is at syn-ack generation time.
About the fixes tags: [2] was supposed to also fix this issue introduced
by [3]. [1] is required as a dependence: it was not explicitly marked as
a fix, but it is one and it has already been backported before [3]. In
other words, this commit should be backported up to [3], including [2]
and [1] if that's not already there. |
| In the Linux kernel, the following vulnerability has been resolved:
scs: fix a wrong parameter in __scs_magic
__scs_magic() needs a 'void *' variable, but a 'struct task_struct *' is
given. 'task_scs(tsk)' is the starting address of the task's shadow call
stack, and '__scs_magic(task_scs(tsk))' is the end address of the task's
shadow call stack. Here should be '__scs_magic(task_scs(tsk))'.
The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGE
is enabled, the shadow call stack usage checking function
(scs_check_usage) would scan an incorrect memory range. This could lead
1. **Inaccurate stack usage reporting**: The function would calculate
wrong usage statistics for the shadow call stack, potentially showing
incorrect value in kmsg.
2. **Potential kernel crash**: If the value of __scs_magic(tsk)is
greater than that of __scs_magic(task_scs(tsk)), the for loop may
access unmapped memory, potentially causing a kernel panic. However,
this scenario is unlikely because task_struct is allocated via the slab
allocator (which typically returns lower addresses), while the shadow
call stack returned by task_scs(tsk) is allocated via vmalloc(which
typically returns higher addresses).
However, since this is purely a debugging feature
(CONFIG_DEBUG_STACK_USAGE), normal production systems should be not
unaffected. The bug only impacts developers and testers who are actively
debugging stack usage with this configuration enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: use global inline_xattr_slab instead of per-sb slab cache
As Hong Yun reported in mailing list:
loop7: detected capacity change from 0 to 131072
------------[ cut here ]------------
kmem_cache of name 'f2fs_xattr_entry-7:7' already exists
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]
RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
Call Trace:
__kmem_cache_create include/linux/slab.h:353 [inline]
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]
f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843
f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918
get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692
vfs_get_tree+0x43/0x140 fs/super.c:1815
do_new_mount+0x201/0x550 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x298/0x2f0 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug can be reproduced w/ below scripts:
- mount /dev/vdb /mnt1
- mount /dev/vdc /mnt2
- umount /mnt1
- mounnt /dev/vdb /mnt1
The reason is if we created two slab caches, named f2fs_xattr_entry-7:3
and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,
slab system will only create one slab cache core structure which has
slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same
structure and cache address.
So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will
decrease reference count of slab cache, rather than release slab cache
entirely, since there is one more user has referenced the cache.
Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,
slab system will find that there is existed cache which has the same name
and trigger the warning.
Let's changes to use global inline_xattr_slab instead of per-sb slab cache
for fixing. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: PM: Fix reverse check in filesystems_freeze_callback()
The freeze_all_ptr check in filesystems_freeze_callback() introduced by
commit a3f8f8662771 ("power: always freeze efivarfs") is reverse which
quite confusingly causes all file systems to be frozen when
filesystem_freeze_enabled is false.
On my systems it causes the WARN_ON_ONCE() in __set_task_frozen() to
trigger, most likely due to an attempt to freeze a file system that is
not ready for that.
Add a logical negation to the check in question to reverse it as
appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Sign extend kfunc call arguments
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it). |
| In the Linux kernel, the following vulnerability has been resolved:
erspan: Initialize options_len before referencing options.
The struct ip_tunnel_info has a flexible array member named
options that is protected by a counted_by(options_len)
attribute.
The compiler will use this information to enforce runtime bounds
checking deployed by FORTIFY_SOURCE string helpers.
As laid out in the GCC documentation, the counter must be
initialized before the first reference to the flexible array
member.
After scanning through the files that use struct ip_tunnel_info
and also refer to options or options_len, it appears the normal
case is to use the ip_tunnel_info_opts_set() helper.
Said helper would initialize options_len properly before copying
data into options, however in the GRE ERSPAN code a partial
update is done, preventing the use of the helper function.
Before this change the handling of ERSPAN traffic in GRE tunnels
would cause a kernel panic when the kernel is compiled with
GCC 15+ and having FORTIFY_SOURCE configured:
memcpy: detected buffer overflow: 4 byte write of buffer size 0
Call Trace:
<IRQ>
__fortify_panic+0xd/0xf
erspan_rcv.cold+0x68/0x83
? ip_route_input_slow+0x816/0x9d0
gre_rcv+0x1b2/0x1c0
gre_rcv+0x8e/0x100
? raw_v4_input+0x2a0/0x2b0
ip_protocol_deliver_rcu+0x1ea/0x210
ip_local_deliver_finish+0x86/0x110
ip_local_deliver+0x65/0x110
? ip_rcv_finish_core+0xd6/0x360
ip_rcv+0x186/0x1a0
Reported-at: https://launchpad.net/bugs/2129580 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec: Enable SMT before waking offline CPUs
If SMT is disabled or a partial SMT state is enabled, when a new kernel
image is loaded for kexec, on reboot the following warning is observed:
kexec: Waking offline cpu 228.
WARNING: CPU: 0 PID: 9062 at arch/powerpc/kexec/core_64.c:223 kexec_prepare_cpus+0x1b0/0x1bc
[snip]
NIP kexec_prepare_cpus+0x1b0/0x1bc
LR kexec_prepare_cpus+0x1a0/0x1bc
Call Trace:
kexec_prepare_cpus+0x1a0/0x1bc (unreliable)
default_machine_kexec+0x160/0x19c
machine_kexec+0x80/0x88
kernel_kexec+0xd0/0x118
__do_sys_reboot+0x210/0x2c4
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
This occurs as add_cpu() fails due to cpu_bootable() returning false for
CPUs that fail the cpu_smt_thread_allowed() check or non primary
threads if SMT is disabled.
Fix the issue by enabling SMT and resetting the number of SMT threads to
the number of threads per core, before attempting to wake up all present
CPUs. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Do not reprogram affinitiy on ASP chip
The ASP chip is a very old variant of the GSP chip and is used e.g. in
HP 730 workstations. When trying to reprogram the affinity it will crash
with a HPMC as the relevant registers don't seem to be at the usual
location. Let's avoid the crash by checking the sversion. Also note,
that reprogramming isn't necessary either, as the HP730 is a just a
single-CPU machine. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
syzkaller found it could overflow math in the test infrastructure and
cause a WARN_ON by corrupting the reserved interval tree. This only
effects test kernels with CONFIG_IOMMUFD_TEST.
Validate the user input length in the test ioctl. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix string copying in parse_apply_sb_mount_options()
strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term
string of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introduce
memtostr() and memtostr_pad()") provides additional information in that
regard. So if this happens, the following warning is observed:
strnlen: detected buffer overflow: 65 byte read of buffer size 64
WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Modules linked in:
CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Call Trace:
<TASK>
__fortify_panic+0x1f/0x30 lib/string_helpers.c:1039
strnlen include/linux/fortify-string.h:235 [inline]
sized_strscpy include/linux/fortify-string.h:309 [inline]
parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline]
__ext4_fill_super fs/ext4/super.c:5261 [inline]
ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706
get_tree_bdev_flags+0x387/0x620 fs/super.c:1636
vfs_get_tree+0x93/0x380 fs/super.c:1814
do_new_mount fs/namespace.c:3553 [inline]
path_mount+0x6ae/0x1f70 fs/namespace.c:3880
do_mount fs/namespace.c:3893 [inline]
__do_sys_mount fs/namespace.c:4103 [inline]
__se_sys_mount fs/namespace.c:4080 [inline]
__x64_sys_mount+0x280/0x300 fs/namespace.c:4080
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Since userspace is expected to provide s_mount_opts field to be at most 63
characters long with the ending byte being NUL-term, use a 64-byte buffer
which matches the size of s_mount_opts, so that strscpy_pad() does its job
properly. Return with error if the user still managed to provide a
non-NUL-term string here.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: change all pageblocks migrate type on coalescing
When a page is freed it coalesces with a buddy into a higher order page
while possible. When the buddy page migrate type differs, it is expected
to be updated to match the one of the page being freed.
However, only the first pageblock of the buddy page is updated, while the
rest of the pageblocks are left unchanged.
That causes warnings in later expand() and other code paths (like below),
since an inconsistency between migration type of the list containing the
page and the page-owned pageblocks migration types is introduced.
[ 308.986589] ------------[ cut here ]------------
[ 308.987227] page type is 0, passed migratetype is 1 (nr=256)
[ 308.987275] WARNING: CPU: 1 PID: 5224 at mm/page_alloc.c:812 expand+0x23c/0x270
[ 308.987293] Modules linked in: algif_hash(E) af_alg(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) s390_trng(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) i2c_core(E) drm_panel_orientation_quirks(E) loop(E) nfnetlink(E) vsock_loopback(E) vmw_vsock_virtio_transport_common(E) vsock(E) ctcm(E) fsm(E) diag288_wdt(E) watchdog(E) zfcp(E) scsi_transport_fc(E) ghash_s390(E) prng(E) aes_s390(E) des_generic(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha_common(E) paes_s390(E) crypto_engine(E) pkey_cca(E) pkey_ep11(E) zcrypt(E) rng_core(E) pkey_pckmo(E) pkey(E) autofs4(E)
[ 308.987439] Unloaded tainted modules: hmac_s390(E):2
[ 308.987650] CPU: 1 UID: 0 PID: 5224 Comm: mempig_verify Kdump: loaded Tainted: G E 6.18.0-gcc-bpf-debug #431 PREEMPT
[ 308.987657] Tainted: [E]=UNSIGNED_MODULE
[ 308.987661] Hardware name: IBM 3906 M04 704 (z/VM 7.3.0)
[ 308.987666] Krnl PSW : 0404f00180000000 00000349976fa600 (expand+0x240/0x270)
[ 308.987676] R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 308.987682] Krnl GPRS: 0000034980000004 0000000000000005 0000000000000030 000003499a0e6d88
[ 308.987688] 0000000000000005 0000034980000005 000002be803ac000 0000023efe6c8300
[ 308.987692] 0000000000000008 0000034998d57290 000002be00000100 0000023e00000008
[ 308.987696] 0000000000000000 0000000000000000 00000349976fa5fc 000002c99b1eb6f0
[ 308.987708] Krnl Code: 00000349976fa5f0: c020008a02f2 larl %r2,000003499883abd4
00000349976fa5f6: c0e5ffe3f4b5 brasl %r14,0000034997378f60
#00000349976fa5fc: af000000 mc 0,0
>00000349976fa600: a7f4ff4c brc 15,00000349976fa498
00000349976fa604: b9040026 lgr %r2,%r6
00000349976fa608: c0300088317f larl %r3,0000034998800906
00000349976fa60e: c0e5fffdb6e1 brasl %r14,00000349976b13d0
00000349976fa614: af000000 mc 0,0
[ 308.987734] Call Trace:
[ 308.987738] [<00000349976fa600>] expand+0x240/0x270
[ 308.987744] ([<00000349976fa5fc>] expand+0x23c/0x270)
[ 308.987749] [<00000349976ff95e>] rmqueue_bulk+0x71e/0x940
[ 308.987754] [<00000349976ffd7e>] __rmqueue_pcplist+0x1fe/0x2a0
[ 308.987759] [<0000034997700966>] rmqueue.isra.0+0xb46/0xf40
[ 308.987763] [<0000034997703ec8>] get_page_from_freelist+0x198/0x8d0
[ 308.987768] [<0000034997706fa8>] __alloc_frozen_pages_noprof+0x198/0x400
[ 308.987774] [<00000349977536f8>] alloc_pages_mpol+0xb8/0x220
[ 308.987781] [<0000034997753bf6>] folio_alloc_mpol_noprof+0x26/0xc0
[ 308.987786] [<0000034997753e4c>] vma_alloc_folio_noprof+0x6c/0xa0
[ 308.987791] [<0000034997775b22>] vma_alloc_anon_folio_pmd+0x42/0x240
[ 308.987799] [<000003499777bfea>] __do_huge_pmd_anonymous_page+0x3a/0x210
[ 308.987804] [<00000349976cb0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/kexec: fix IMA when allocation happens in CMA area
*** Bug description ***
When I tested kexec with the latest kernel, I ran into the following warning:
[ 40.712410] ------------[ cut here ]------------
[ 40.712576] WARNING: CPU: 2 PID: 1562 at kernel/kexec_core.c:1001 kimage_map_segment+0x144/0x198
[...]
[ 40.816047] Call trace:
[ 40.818498] kimage_map_segment+0x144/0x198 (P)
[ 40.823221] ima_kexec_post_load+0x58/0xc0
[ 40.827246] __do_sys_kexec_file_load+0x29c/0x368
[...]
[ 40.855423] ---[ end trace 0000000000000000 ]---
*** How to reproduce ***
This bug is only triggered when the kexec target address is allocated in
the CMA area. If no CMA area is reserved in the kernel, use the "cma="
option in the kernel command line to reserve one.
*** Root cause ***
The commit 07d24902977e ("kexec: enable CMA based contiguous
allocation") allocates the kexec target address directly on the CMA area
to avoid copying during the jump. In this case, there is no IND_SOURCE
for the kexec segment. But the current implementation of
kimage_map_segment() assumes that IND_SOURCE pages exist and map them
into a contiguous virtual address by vmap().
*** Solution ***
If IMA segment is allocated in the CMA area, use its page_address()
directly. |
