| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: enable basic endpoint checking
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-21 and 6.9.13-46, a malicious MIFF file could trigger an overflow when a user opens it in the display tool and right-clicks a tile to invoke the Load / Update menu item. This vulnerability is fixed in 7.1.2-21 and 6.9.13-46. |
| Media Encoder versions 26.0.2, 25.6.4 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| libcurl might in some circumstances reuse the wrong connection for SMB(S)
transfers.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a network transfer operation that was requested by an
application could wrongfully reuse an existing SMB connection to the same
server that was using a different 'share' than the new subsequent transfer
should.
This could in unlucky situations lead to the download of the wrong file or the
upload of a file to the wrong place. When this happens, the same credentials
are used and the server name is the same. |
| If a trusted template author were to write a <script> tag containing an empty 'type' attribute or a 'type' attribute with an ASCII whitespace, the execution of the template would incorrectly escape any data passed into the <script> block. |
| Kimai is an open-source time tracking application. From version 2.27.0 to before version 2.54.0, any ROLE_USER can create a tag with a formula string as its name (e.g. =SUM(54+51)) via POST /api/tags and assign it to a timesheet. When an admin exports timesheets to XLSX, ArrayFormatter.formatValue() joins tag names with implode() and returns the result unchanged. OpenSpout promotes any =-prefixed string to a FormulaCell, writing <f>SUM(54+51)</f> into the XLSX archive. Excel evaluates the formula when the file is opened. This issue has been patched in version 2.54.0. |
| Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2. |
| When NGINX Open Source is configured to proxy HTTP/2 traffic by setting proxy_http_version to 2, and also uses proxy_set_body, an attacker may be able to inject frame headers and payload bytes to the upstream peer. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated attackers can send requests that with conditions beyond the attackers' control to cause a heap buffer over-read in the NGINX worker process, leading to limited disclosure of memory or a restart.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in BIG-IP systems that may allow an authenticated attacker with administrative access to escalate their privileges. A successful exploit may allow the attacker to cross a security boundary.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.80.5 to before version 1.83.7, the POST /prompts/test endpoint accepted user-supplied prompt templates and rendered them without sandboxing. A crafted template could run arbitrary code inside the LiteLLM Proxy process. The endpoint only checks that the caller presents a valid proxy API key, so any authenticated user could reach it. Depending on how the proxy is deployed, this could expose secrets in the process environment (such as provider API keys or database credentials) and allow commands to be run on the host. This issue has been patched in version 1.83.7. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, jq accepts embedded NUL bytes in import paths at the jq-language level, but later resolves those paths through C string operations during module and data-file lookup. This creates a mismatch between the logical import string that policy or audit code may validate and the on-disk path that jq actually opens. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, when decNumberFromString is given a number literal of INT_MAX-1 (2147483646) digits, the D2U() macro overflows during signed-int arithmetic. The wrapped negative value bypasses the heap-allocation size check, causes the function to use a 30-byte stack buffer, and then writes ≈715 million 16-bit units (≈1.4 GiB) at an offset 1.43 GiB below the stack frame. The written content is fully attacker-controlled (the parsed decimal digits, packed 3-per-unit). |
| jq is a command-line JSON processor. In 1.8.1 and earlier, the jq bytecode VM's data stack tracks its allocation size in a signed int. When the stack grows beyond ≈1 GiB (via deeply nested generator forks), the doubling arithmetic overflows. The wrapped value is passed to realloc and then used for a memmove with attacker-influenced offsets. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, Top-level jq programs loaded from a file with -f are truncated at the first embedded NUL byte on current upstream HEAD. A crafted filter file such as . followed by \x00 and arbitrary suffix compiles and executes as only the prefix before the NUL. This leaves jq with a post-CVE-2026-33948 prefix/full-buffer mismatch on the compilation path even though the JSON parser path has already been fixed. |
| When a BIG-IP APM access policy is configured on a virtual server, undisclosed traffic can cause the apmd process to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
